This Standard specifies the requirements for hot-rolled mild steel plates and sheets (hereafter referred to as steel sheets) and hot-rolled mild steel strips (hereafter referred to as steel strips) for commercial and processing qualities. NOTE The...
5.1 The small size of the wire compared to the short galvanic interaction distance in atmospheric exposures gives a large cathode-to-anode area ratio which accelerates the galvanic attack. The area between the wire and the threads creates a long, tight crevice, also accelerating the corrosion. For...
1.1 This specification2 covers precipitation-harden
This specification covers bearings, which consist of all elastomer or of alternate laminates of elastomer and steel, when the function of the bearings is to transfer loads or accommodate relative movement between a bridge superstructure and its supporting structure, or both. The bearings are...
This specification covers warping heads used with windlass, winch, and capstan drive units to pull rope on board ships. Warping heads are primarily for use with fiber rope, natural, or synthetic. Warping heads with external ribs or whelps on the barrel, notched flanges, attached storage drums,...
1.1 This specification2 covers precipitation-harden
1.1 This specification2 covers precipitation-harden
Scope. This specification covers woven nylon, textile webbing.
Scope. This specification describes the requirements and verification methods for the following item: IGNITER, TIME BLASTING FUSE: with shock tube capability, M81.
Scope. This specification describes the performance and design of self-contained heater modules consisting of polymeric food trays, Institutional Size Pouches (ISP) or Boil-In-Bag (BIB) modules, flameless heaters, activation fluid, heating trays, an activation mechanism and other components, as...
Narrow Your Results