loading
DICTIONARY OF MILITARY - OFFICIAL DICTIONARY OF MILITARY TERMS
IHS
A description is not available for this item.
ASTM F1892-26 - Standard Guide for Ionizing Radiation (Total Dose) Effects Testing of Semiconductor Devices
June 1, 2026 - ASTM International

5.1 Electronic circuits used in space, military, and nuclear power systems may be exposed to various levels of ionizing radiation. It is essential for the design and fabrication of such circuits that test methods be available that can determine the vulnerability or hardness (measure of...

ASTM D1655-26b - Standard Specification for Aviation Turbine Fuels
June 15, 2026 - ASTM International

1.1 This specification covers the use of purchasing agencies in formulating specifications for purchases of aviation turbine fuel under contract. 1.2 This specification defines the minimum property requirements for Jet A and Jet A-1 aviation turbine fuel and lists acceptable additives for use in...

ASTM F2272-26 - Standard Specification for Paintball Markers
May 1, 2026 - ASTM International

This specification covers the performance requirements and test methods for paintball markers that propel paintballs using energy released from compressed air, compressed gas, or a combination of compressed air and gas. This does not cover non-recreational paintball markers such as those used in...

ASTM D7566-26a - Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
June 15, 2026 - ASTM International

1.1 This specification covers the manufacture of aviation turbine fuel that consists of conventional and synthetic blending components. 1.2 See Appendix X2 for an expanded description of the procedure for the production and blending of synthetic blend components. 1.3 This specification applies only...

ASTM D1655-26a - Standard Specification for Aviation Turbine Fuels
May 1, 2026 - ASTM International

1.1 This specification covers the use of purchasing agencies in formulating specifications for purchases of aviation turbine fuel under contract. 1.2 This specification defines the minimum property requirements for Jet A and Jet A-1 aviation turbine fuel and lists acceptable additives for use in...

ASTM F3201-26 - Standard Practice for Ensuring Dependability of Software Used in Unmanned Aircraft Systems (UAS)
May 1, 2026 - ASTM International

5.1 There is interest from industry and CAAs to create a means of compliance for software assurance for UAS, particularly in instances where conventional design assurance requirement management processes may over-prescribe requirements in relation to the level of risk of the UAS operation, or of...

ASTM D1655-26 - Standard Specification for Aviation Turbine Fuels
April 1, 2026 - ASTM International

1.1 This specification covers the use of purchasing agencies in formulating specifications for purchases of aviation turbine fuel under contract. 1.2 This specification defines the minimum property requirements for Jet A and Jet A-1 aviation turbine fuel and lists acceptable additives for use in...

ASTM D7171-26 - Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
March 1, 2026 - ASTM International

5.1 Hydrogen content represents a fundamental quality of a petroleum distillate that has been correlated with many of the performance characteristics of that product. Combustion properties of gas turbine fuels are related primarily to hydrogen content. As hydrogen content of these fuels decreases,...

ASTM D5746-26 - Standard Classification of Environmental Condition of Property Area Types, Including Explosives Safety for Federally-Owned Real Property
April 1, 2026 - ASTM International

1.1 Purpose-The purpose of this classification is to define eight standard environmental condition of property area types for federally-owned real property with respect to the requirements of the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) of 1980 Section 120(h),...

ASTM D7566-26 - Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
April 1, 2026 - ASTM International

1.1 This specification covers the manufacture of aviation turbine fuel that consists of conventional and synthetic blending components. 1.2 See Appendix X2 for an expanded description of the procedure for the production and blending of synthetic blend components. 1.3 This specification applies only...

ASTM E3068-20(2026) - Standard Test Method for Contact Measurement of Backface Deformation in Clay Backing During Body Armor Testing
March 15, 2026 - ASTM International

1.1 This test method covers methods for the contact measurement of backface deformation (BFD) in clay backing caused by a test threat that produces a partial penetration in a body armor test item. 1.2 This test method is applicable to testing of planar and nonplanar soft armor and hard armor. 1.3...

ASTM D6008-26 - Standard Practice for Determining the Environmental Condition of Federal Property
April 1, 2026 - ASTM International

1.1 Purpose-The purpose of this practice is to define good commercial and customary practice in the United States for assessing the environmental condition of property (ECP) of federal real property. This practice applies to property under consideration for lease, excess and surplus property at...

ASTM C1696-26 - Standard Guide for Industrial Thermal Insulation Systems
March 1, 2026 - ASTM International

1.1 This guide covers information on selection of insulation materials, systems design, application methods, protective coverings, guarantees, inspection, testing, and maintenance of thermal insulation primarily for industrial applications in a temperature range of -320 to 1200°F (-195.5 to 648...

ASTM E2677-26 - Standard Test Method for Estimating Limits of Detection in Trace Detectors for Explosives and Drugs of Interest
March 1, 2026 - ASTM International

5.1 Commercial trace detectors are used by first responders, security screeners, the military, and law enforcement to detect and identify explosive threats and drugs of interest quickly. These trace detectors typically operate by detecting chemical agents in residues and particles sampled...

ASTM D8182-25 - Standard Test Method for Alloy Classification of Wear Debris using Laser-Induced Breakdown Spectroscopy (LIBS)
December 1, 2025 - ASTM International

5.1 In many cases, equipment failure modes are identified by wear debris that is not captured in used lubricating oil samples but captured on chip detectors, filters or by other means. Users of this technique include, but are not limited to, original equipment manufacturers (OEMs), commercial...

ASTM E3192/E3192M-20(2026) - Standard Practice for Soft Armor Conditioning by Tumbling
February 1, 2026 - ASTM International

1.1 This practice applies only to the conditioning of soft body armor via temperature, humidity, and tumbling exposure prior to ballistic resistance testing. 1.2 This practice is intended for soft armor for law enforcement applications, and its purpose is to subject test items to conditions...

ASTM B969/B969M-25 - Standard Specification for Aluminum-Alloy Castings Produced by Squeeze Casting, and the Semi-Solid Thixocast and Rheocast Casting Processes
December 1, 2025 - ASTM International

This specification covers the material, chemical and mechanical requirements for aluminum-alloy castings produced by the thixocast, rheocast, semi-solid and squeeze casting processes. It does not apply to castings used in aerospace applications. Castings shall conform to the chemical composition...

ASTM D1655-25a - Standard Specification for Aviation Turbine Fuels
December 1, 2025 - ASTM International

1.1 This specification covers the use of purchasing agencies in formulating specifications for purchases of aviation turbine fuel under contract. 1.2 This specification defines the minimum property requirements for Jet A and Jet A-1 aviation turbine fuel and lists acceptable additives for use in...

ASTM D240-25 - Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
November 1, 2025 - ASTM International

5.1 The heat of combustion is a measure of the energy available from a fuel. A knowledge of this value is essential when considering the thermal efficiency of equipment for producing either power or heat. 5.2 The heat of combustion as determined by this test method is designated as one of the...

Advertisement