loading
IEEE MOBILE HDBK - THE MOBILE COMMUNICATIONS HANDBOOK
IEEE
A description is not available for this item.
IEEE WP MOBILE ADWARE - White Paper - SA Industry Connections and AMTSO Mobile Adware Guidelines
November 3, 2015 - IEEE

Introduction This document sets out guidelines for advertising-supported software on mobile devices. These guidelines are intended to assist developers of both apps and advertising modules designed to integrate into third-party apps to help ensure that the advertising components operate in...

WIRELESS/MOBILE CD - WIRELESS/MOBILE STANDARDS COLLECTION
IHS
A description is not available for this item.
IEEE MICROWAVE MOBILE - MICROWAVE MOBILE COMMUNICATIONS
IEEE
A description is not available for this item.
ITU MANUAL ON MOBILE - MANUAL ON MOBILE COMMUNICATION DEVELOPMENT - GENEVA
ITU-T
A description is not available for this item.
IEEE THE MOBILE COMMUN - THE MOBILE COMMUNICATIONS HANDBOOK, SECOND EDITION
IEEE
A description is not available for this item.
ASTM E2706-26 - Standard Practice for Equipment Technology and Operations for Mobile and Plant-Based Secure Destruction Safety Requirements
January 1, 2026 - ASTM International

1.1 This practice sets forth criteria for the design, manufacture, assembly, modification, operation, maintenance, service, or repair of plant-based and mobile secure destruction equipment. 1.2 This practice is applicable both to plant-based (fixed facility) and mobile (truck-based)...

ASTM E3347/E3347M-26 - Standard Specification for Ballistic-Resistant Shields Used by Law Enforcement Officers
June 1, 2026 - ASTM International

1.1 This standard specifies minimum performance requirements and test methods for the ballistic resistance of shields used by U.S. law enforcement officers to protect against handgun and rifle ammunition. 1.1.1 The option for testing either handgun-rated or rifle-rated shields with a shotgun threat...

ASTM E3248-26 - Standard Guide for Non-Aqueous Phase Liquid (NAPL) Mobility and Migration in Sediment—Conceptual Models for NAPL Emplacement and Influence on NAPL Movement
May 15, 2026 - ASTM International

1.1 This guide is designed for application at a wide range of sediment sites where non-aqueous phase liquid (NAPL) is present or suspected to be present. This guide describes emplacement mechanisms that can result in NAPL presence within sediment and how the characteristics of the sediment, aquatic...

ASTM C1475-26 - Standard Guide for Determination of Neptunium-237 in Soil
February 1, 2026 - ASTM International

5.1 A soil sampling and analysis program provides a direct means of determining the concentration and distribution of radionuclides in soil. The presence and extent of neptunium-237 is of particular interest because it is one of the more mobile transuranics in terms of migration and plant...

ASTM E2352-19(2026) - Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments—Cleanroom Operations
January 1, 2026 - ASTM International

This practice specifies the basic requirements, procedures, and practices for operating aerospace cleanrooms and controlled environments and the precautions associated with the facility and equipment used. This practice covers the requirements for operational systems, appropriate cleanroom...

ASTM E3300-26 - Standard Guide for Non-Aqueous Phase Liquid (NAPL) Mobility and Migration in Sediment—Factors Affecting Ebullition and Evaluating Ebullition Activity and the Associated Ebullition-Facilitated Transport of NAPL/Contaminants
April 1, 2026 - ASTM International

1.1 Many contaminants (such as petroleum products and coal tar) are emplaced in sediment in the form of an immiscible liquid, known as a non-aqueous phase liquid (NAPL). NAPL can either be a light non-aqueous phase liquid (LNAPL) that is less dense than water or a dense non-aqueous phase liquid...

ASTM E1151-93(2026) - Standard Practice for Ion Chromatography Terms and Relationships
January 1, 2026 - ASTM International

This practice deals primarily with identifying the terms and relationships of those techniques that use ion exchange chromatography to separate mixtures and a conductivity detector to detect the separated components. However, most of the terms should also apply to ion chromatographic techniques...

ASTM E594-96(2026) - Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography
January 1, 2026 - ASTM International

4.1 Although it is possible to observe and measure each of the several characteristics of a detector under different and unique conditions, it is the intent of this recommended practice that a complete set of detector specifications should be obtained at the same operating conditions, including...

ASTM F3295-18(2026) - Standard Guide for Impingement Testing of Total Disc Prostheses
January 1, 2026 - ASTM International

5.1 This guide can be used to develop test parameters for evaluating fatigue and wear behavior of IVD prostheses under impingement loading. It must be recognized, however, that there are likely many possible impingement conditions for a given IVD prosthesis. 5.2 The user should attempt to determine...

ASTM E3268-25 - Standard Guide for Non-Aqueous Phase Liquid (NAPL) Mobility and Migration in Sediment—Sample Collection, Field Screening, and Handling
December 1, 2025 - ASTM International

1.1 Many contaminants (such as petroleum products and coal tar) are emplaced in sediment in the form of an immiscible liquid, known as a non-aqueous phase liquid (NAPL). NAPL can either be a light non-aqueous phase liquid (LNAPL) that is less dense than water or a dense non-aqueous phase liquid...

ASTM F2602-18(2025) - Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
October 1, 2025 - ASTM International

4.1 The degree of deacetylation of chitosan, as well at the molar mass and molar mass distribution, determines the functionality of chitosan in an application. For instance, functional and biological effects are highly dependent upon the composition and molar mass of the polymer. 4.2 This test...

ASTM F3256-25 - Standard Guide for Recording, Reporting, and Analyzing Near-Miss Events to Improve Safety Across the Maritime Industry
October 1, 2025 - ASTM International

4.1 The objective of this near-miss recording and reporting guide is to support companies, organizations, workforce, and safety professionals in the collection, recording, reporting, analysis, and benchmarking of near-miss safety related events that can be leveraged for identifying and reducing...

Advertisement