loading
MPIF INJECTION MOLDING - Injection Molding of Metals and Ceramics
January 1, 1997 - MPIF
A description is not available for this item.
ASTM D3307-21(2026) - Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials
July 1, 2026 - ASTM International

This specification covers melt processable molding and extrusion materials of PFA-perfluoro(alkoxy alkane) fluorocarbon resin. The materials are copolymers of TFE-fluorocarbon resins containing perfluoroalkoxy side chains. This specification is intended to provide a means for calling out...

ASTM D787-26 - Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds
July 1, 2026 - ASTM International

This specification covers the standard requirements for plasticized ethyl cellulose thermoplastic compounds suitable for injection molding and extrusion. It does not however include special materials compounded for special applications. Materials shall be ethyl cellulose plastics in the form...

ASTM D2116-26 - Standard Specification for FEP Resin Molding and Extrusion Materials
July 1, 2026 - ASTM International

1.1 This specification covers melt processable molding and extrusion materials of FEP resin. This specification does not cover recycled FEP materials. These FEP resins are copolymers of tetrafluoroethylene and hexafluoropropylene or modified FEP resins containing no more than 2?% by weight...

ASTM D3222-21(2026) - Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
July 1, 2026 - ASTM International

1.1 This specification covers melt processable molding and extrusion materials, as well as coating materials of poly(vinylidene fluoride) fluoroplastic, commonly abbreviated PVDF (or PVF2 in scientific literature). This specification covers thermoplastic resin materials supplied in pellet or...

ASTM D4576-16(2026) - Standard Test Method for Mold Growth Resistance of Wet Blue and Wet White
July 1, 2026 - ASTM International

4.1 This test method provides a technique for evaluating mold growth resistance characteristics of Wet Blue and Wet White, and should assist in the prediction of storage time before molding occurs. 4.2 The degree of correlation between this test and commercial quantities of Wet Blue and Wet...

ASTM D6110-26 - Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
July 1, 2026 - ASTM International

1.1 This test method is used to determine the resistance of plastics to breakage by flexural shock as indicated by the energy extracted from standardized (see Note 1) pendulum-type hammers, mounted in standardized machines, in breaking standard specimens with one pendulum swing. This test method...

ASTM E911-98(2026) - Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
June 1, 2026 - ASTM International

This specification covers dimensional interchangeability requirements of glass stopcocks with polytetrafluoroethylene (PTFE) plugs for use in ordinary laboratory and industrial applications. However, it does not cover the design characteristics of the stopcock-plug assembly nor the physical or...

ASTM F1580-26 - Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Surgical Implants
June 1, 2026 - ASTM International

1.1 This specification covers the requirements for unalloyed titanium, Ti-6Al-4V, and Ti-6Al-4V ELI alloy powders for use in fabricating titanium and titanium alloy implants. 1.2 Powders covered under this specification may be used to form coatings by sintering or thermal spraying techniques, or in...

ASTM C216-26a - Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
June 1, 2026 - ASTM International

1.1 This specification covers brick intended for use in masonry supplying structural or facing components, or both, to the structure. 1.2 The requirements of this specification apply at the time of purchase. The use of results from testing of brick extracted from masonry structures for determining...

ASTM C1088-26 - Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
June 1, 2026 - ASTM International

1.1 This specification covers thin veneer brick units made from clay, shale, fire clay, sand, or mixtures thereof, and fired to incipient fusion for use in adhered or fastened veneer applications. Three types of thin veneer brick units in each of two grades are covered. In this specification, the...

ASTM B595-26 - Standard Specification for Materials for Aluminum Powder Metallurgy (PM) Structural Parts
May 1, 2026 - ASTM International

This specification covers sintered aluminium structural parts made primarily from aluminum powders to which controlled amounts of master alloys or elemental copper, magnesium, and silicon have been added by blending. Structural parts shall be made by molding and sintering metal powders to...

ASTM C450-18(2026) - Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
March 1, 2026 - ASTM International

4.1 This system of dimensions provides a guide for forming thermal insulation in advance of field application. Forming is done by cutting, grinding, milling, or molding, depending upon the method most suitable for the thermal insulation being fabricated. It is equally applicable for all...

ASTM D2287-26 - Standard Classification System and Basis for Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
February 1, 2026 - ASTM International

1.1 This classification system standard covers nonrigid vinyl chloride polymer and copolymer classes in which the resin portion of the composition contains at least 90?% vinyl chloride. The remaining 10?% can include one or more monomers copolymerized with vinyl chloride or consist of other resins...

ASTM D5605-94(2026) - Standard Practice for Styrene-Butadiene Rubber (SBR)—Establishing Raw Mooney Viscosity Target Values
April 1, 2026 - ASTM International

3.1 Mooney viscosity is used extensively in the rubber industry as a measurement of the general quality of raw or compounded uncured rubber. This special viscosity has been related to average molecular weight and to handling and processing characteristics in various rubber operations such as...

ASTM B793-16(2026) - Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
April 1, 2026 - ASTM International

1.1 This specification covers commercial zinc alloys in ingot form for remelting for the manufacture of dies and molds from the alloys as shown in Table 1. 1.2 This specification presents requirements for zinc alloys suitable for the production of sand cast or plaster cast forming dies for sheet...

ASTM D3299-26 - Standard Specification for Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
April 1, 2026 - ASTM International

1.1 This specification covers cylindrical tanks fabricated by filament winding or contact-molding for above-ground vertical installation, to contain aggressive chemicals at atmospheric pressure as classified herein, and made of a commercial-grade polyester or vinylester resin. Included are...

ASTM D256-26 - Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
April 1, 2026 - ASTM International

1.1 These test methods cover the determination of the resistance of plastics to "standardized" (see Note 1) pendulum-type hammers, mounted in "standardized" machines, in breaking standard specimens with one pendulum swing (see Note 2). The standard tests for these test methods require specimens...

ASTM E2349-26 - Standard Practice for Safety Requirements in Metal Casting Operations: Sand Preparation, Molding, and Core Making; Melting and Pouring; and Cleaning and Finishing
January 1, 2026 - ASTM International

This practice covers the safety requirements for applying the design, construction, and operation of machinery and equipment used in metal casting operations. These operations include sand preparation, molding, and core making; melting and pouring; and cleaning and finishing. This practice...

Advertisement