loading
ISA MOTOR DRV - Motors and Drives - A Practical Technology Guide
January 1, 2003 - ISA

Introduction To study the subject of industrial process control effectively, you must first gain a general understanding of its basic principles. To present these control principles clearly and concisely, an intuitive approach to process control is used. First, however, some basic definitions and...

ASTM D2700-26b - Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
July 1, 2026 - ASTM International

5.1 Motor O.N. correlates with commercial automotive spark-ignition engine antiknock performance under severe conditions of operation. 5.2 Motor O.N. is used by engine manufacturers, petroleum refiners and marketers, and in commerce as a primary specification measurement related to...

ASTM D2700-26a - Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
June 1, 2026 - ASTM International

5.1 Motor O.N. correlates with commercial automotive spark-ignition engine antiknock performance under severe conditions of operation. 5.2 Motor O.N. is used by engine manufacturers, petroleum refiners and marketers, and in commerce as a primary specification measurement related to...

ASTM D2700-26 - Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
May 1, 2026 - ASTM International

5.1 Motor O.N. correlates with commercial automotive spark-ignition engine antiknock performance under severe conditions of operation. 5.2 Motor O.N. is used by engine manufacturers, petroleum refiners and marketers, and in commerce as a primary specification measurement related to...

ASTM D1319-26 - Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
July 1, 2026 - ASTM International

5.1 The determination of the total volume?percent of saturates, olefins, and aromatics in petroleum fractions is important in characterizing the quality of petroleum fractions as gasoline blending components and as feeds to catalytic reforming processes. This information is also important in...

ASTM D7680-10(2026) - Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester
June 1, 2026 - ASTM International

1.1 This practice covers the procedure for preparing laboratory prints of paste printing inks using a motor-driven printability tester. 1.2 This practice covers printability testers of four different designs, referred to as Tester A, B, C, and D. These testers feature "push-button" control...

ASTM D2699-26 - Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
July 1, 2026 - ASTM International

5.1 Research O.N. correlates with commercial automotive spark-ignition engine antiknock performance under mild conditions of operation. 5.2 Research O.N. is used by engine manufacturers, petroleum refiners and marketers, and in commerce as a primary specification measurement related to the matching...

ASTM D7547-26a - Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
May 1, 2026 - ASTM International

This specification establishes the requirements for purchases of Grade UL 91 unleaded aviation gasoline under contract and is intended primarily for use by purchasing agencies. It does not cover any other gasolines satisfactory for reciprocating aviation engines. The unleaded aviation gasoline,...

ASTM D910-26 - Standard Specification for Leaded Aviation Gasolines
May 1, 2026 - ASTM International

This specification covers purchases of aviation gasoline under contract and is intended primarily for use by purchasing agencies. This specification does not include all gasoline satisfactory for reciprocating aviation engines, but rather, defines the following specific types of aviation gasoline...

ASTM F2291-26 - Standard Practice for Design of Amusement Rides and Devices
June 1, 2026 - ASTM International

1.1 This practice establishes criteria for the design of amusement rides, devices and major modifications to amusement rides and devices manufactured after the effective date of publication except as noted in 1.2. 1.2 This practice in its entirety shall not apply to the following: 1.2.1 Playground...

ASTM D3606-26 - Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography
May 1, 2026 - ASTM International

1.1 This test method covers the quantitation in liquid volume percent of benzene and toluene in finished motor and aviation spark ignition fuels by gas chromatography. This test method has two procedures: Procedure A uses capillary column gas chromatography and Procedure B uses packed column...

ASTM F1003-19(2025) - Standard Specification for Searchlights on Motor Lifeboats
October 1, 2025 - ASTM International

This specification covers searchlights for motor lifeboats. Searchlights shall be of sturdy construction, and free from mechanical, electrical, or other imperfections or defects which materially affect appearance or which may affect quality, reliability, or serviceability. Watertightness...

ASTM D5580-26 - Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
May 1, 2026 - ASTM International

1.1 This test method covers the determination of benzene, toluene, ethylbenzene, the xylenes, C9 and heavier aromatics, and total aromatics in finished motor gasoline by gas chromatography. 1.2 The aromatic hydrocarbons are separated without interferences from other hydrocarbons in finished...

ASTM D2700-25 - Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
November 1, 2025 - ASTM International

5.1 Motor O.N. correlates with commercial automotive spark-ignition engine antiknock performance under severe conditions of operation. 5.2 Motor O.N. is used by engine manufacturers, petroleum refiners and marketers, and in commerce as a primary specification measurement related to...

ASTM D7547-26 - Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
March 1, 2026 - ASTM International

This specification establishes the requirements for purchases of Grade UL 91 unleaded aviation gasoline under contract and is intended primarily for use by purchasing agencies. It does not cover any other gasolines satisfactory for reciprocating aviation engines. The unleaded aviation gasoline,...

ASTM F3725-25 - Standard Consumer Safety Specification for Dog Harnesses for Motor Vehicle Safety
October 1, 2025 - ASTM International

1.1 In this specification, procedures for dog safety harness restraint systems used in motor vehicles are detailed. 1.2 In this specification, methods used to test vehicle dog harness restraint systems that can differ from other various products or methods used to restrain dogs within a...

ASTM D7319-26 - Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
March 1, 2026 - ASTM International

1.1 This test method covers a direct injection ion chromatographic procedure for determining existent and potential inorganic sulfate and total inorganic chloride content in hydrous and anhydrous denatured ethanol and butanol to be used in motor fuel applications. It is intended for the...

ASTM F2050-19(2026) - Standard Consumer Safety Specification for Hand-Held Infant Carriers
March 1, 2026 - ASTM International

1.1 This consumer safety specification establishes performance requirements, test methods, and marking requirements to promote safe use of a hand-held infant carrier by an occupant and caregiver. 1.2 This consumer safety specification is intended to minimize the risk of incidents to an occupant...

ASTM D525-12a(2025) - Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)
December 1, 2025 - ASTM International

5.1 The induction period may be used as an indication of the tendency of motor gasoline to form gum in storage. It should be recognized, however, that its correlation with the formation of gum in storage may vary markedly under different storage conditions and with different gasolines.

Advertisement