Introduction & Scope The Metal Powder Industries Federation (MPIF) is a voluntary-membership
1.1 This specification establishes minimum design, performance, labeling, and documentation criteria for protective ensembles, protective garments, protective gloves, protective footwear, and protective hoods for use at facilities with radioactive material...
4.1 The purpose of this guide is to provide clear and consistent guidance with regard to the respirator fit-testing components of an effective respiratory protection program. 4.2 The respirator fit test itself is simply one facet of fit testing. An effective program requires...
1.1 These practices cover the collection of visible powders that are suspected biological agents and toxins from solid nonporous surfaces using a bulk collection method, using a dry swab and laminated card, followed by a swab sampling method using a sterile moistened swab. Bulk powder samples are...
5.1 Test Method D1230 cannot be recommended for the acceptance testing of commercial shipments since Federal regulations require apparel fabrics to meet the criteria of 16 CFR Part 1610 and correlation of test results with actual performance has not been established. Although...
Introduction To study the subject of industrial process control effectively, you must first gain a general understanding of its basic principles. To present these control principles clearly and concisely, an intuitive approach to process control is used. First, however, some basic definitions and...
Narrow Your Results