loading
ASTM E3025-22 - Standard Guide for Tiered Approach to Detection and Characterization of Silver Nanomaterials in Textiles
November 15, 2022 - ASTM International

4.1 Natural and manufactured textiles fibers can be treated with chemicals to provide enhanced antimicrobial (fungi, bacteria, viruses) properties. In some cases, silver nanomaterials may be used to treat textile fibers (1).6 Silver nanomaterials are used to treat a wide array of...

ASTM E2526-22 - Standard Test Method for Evaluation of Cytotoxicity of Nanoparticulate Materials in Porcine Kidney Cells and Human Hepatocarcinoma Cells
July 1, 2022 - ASTM International

5.1 Assessing the propensity of a nanomaterial to cause cytotoxicity to the cells of a target organ can assist in preclinical development. 5.2 The standard historical cytotoxicity testing of materials and extracts of materials has used fibroblasts and is well documented in Practice F813,...

ASTM C1919-22 - Standard Practice for Measurement of the Steady-State Thermal Transmission Properties of Small Specimens Using the Heat Flow Meter Apparatus
December 1, 2022 - ASTM International

5.1 Thermal conductivity measurements on small insulation specimens are important during new product development processes or when larger specimens cannot be collected during forensic investigation (that is, failure analysis) (1, 2). 5.2 Numerous research projects have recently been initiated to...

ASTM E3351-22 - Standard Test Method for Detection of Nitric Oxide Production In Vitro
July 1, 2022 - ASTM International

5.1 This test method is designed to evaluate nanomaterial capacity to induce nitric oxide production by macrophages. 5.2 Activated macrophages generate large quantities of NO. NO generated from activated macrophages is a cytostatic/cytotoxic agent (3-6). 5.3 The production of NO in excessive...

ASTM E2834-12(2022) - Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
September 1, 2022 - ASTM International

1.1 This guide deals with the measurement of particle size distribution of suspended particles, from ~10?nm to the onset of sedimentation, sample dependent, using the nanoparticle tracking analysis (NTA) technique. It does not provide a complete measurement methodology for any specific...

Nanostructured Smart Materials Synthesis, Characterization, and Potential Applications
January 1, 2022 - CRC

This new volume presents various research studies that focus on the development of advanced nanomaterials and their composites and blends for different applications in sensing, electrical, biomedical, coating, industrial applications, etc. This book includes detailed discussions on the...

ASTM E3071-22 - Standard Guide for Nanotechnology Workforce Education in Materials Synthesis and Processing
February 1, 2022 - ASTM International

5.1 The purpose of this guide is to provide, at the undergraduate college level, a basic educational structure in the synthesis and processing of nanoscale materials to organizations developing or carrying out education programs for the nanotechnology workforce. This guide helps to describe the...

ASTM E3089-22 - Standard Guide for Nanotechnology Workforce Education in Material Properties and Effects of Size
February 1, 2022 - ASTM International

5.1 This guide establishes, at the undergraduate college level, the basic education structure for understanding the unique properties and applications of nanoscale materials as compared to bulk properties and applications of macroscale materials. It helps to describe the minimum knowledge base for...

ASTM E3059-22 - Standard Guide for Workforce Education in Nanotechnology Infrastructure
February 1, 2022 - ASTM International

5.1 The purpose of this guide is to provide, at the undergraduate college level, a basic educational structure in the infrastructure aspects of nanotechnology to organizations developing or carrying out education programs for the nanotechnology workforce. This guide helps to describe the minimum...

DS/ISO/TS 22082 - Nanotechnologies – Assessment of nanomaterial toxicity using dechorionated zebrafish embryo
May 12, 2020 - DS

This document specifies a method for rapidly assessing nanomaterial toxicity (fish early life stage, 0 HPF to 120 HPF). It includes information on the importance of acellular chorion removal, detailed chorion removal procedures, and a complete protocol for the toxicity assessment of...

ISO TS 22082 - Nanotechnologies — Assessment of nanomaterial toxicity using dechorionated zebrafish embryo
May 1, 2020 - ISO

This document specifies a method for rapidly assessing nanomaterial toxicity (fish early life stage, 0 HPF to 120 HPF). It includes information on the importance of acellular chorion removal, detailed chorion removal procedures, and a complete protocol for the toxicity assessment of...

Hydrothermal Behavior of Fiber- and Nanomaterial-Reinforced Polymer Composites
May 7, 2020 - CRC

Hydrothermal Behavior of Fiber- and Nanomaterial-Reinforced Polymer Composites provides critical information regarding the in-service environmental damage and degradation studies of nano/fiber reinforced polymer (FRP) composites focusing on hydrothermal degradation. Covering hydrothermal...

Nanomaterials for Spectroscopic Applications
June 18, 2021 - CRC

This book provides an overview of key current developments in the synthetic strategy of functional novel nanomaterials in various spectroscopic characterizations and evaluations and highlights possible future applications in nanotechnology and materials science. It illustrates the...

Functionalized Nanomaterials II Applications
April 12, 2021 - CRC

The functionalization of nanomaterials provides them with some unique properties, making the same nanomaterial amenable for various applications by simply manipulating functional components. However, functionalized nanomaterials also face some challenges, along with some...

FUNCTIONAL NANOMATERIAL FOR PHOTOENERGY CONVERSION: NANOELECTRONIC TECHNOLOGY
October 23, 2020 - WSPC
A description is not available for this item.
Chemical Methods for Processing Nanomaterials
March 16, 2021 - CRC

This book discusses the latest advancements in the processing of various types of nanomaterials. The main objective of the book is to provide the reader with a comprehensive review of the latest advances in synthesis as well as processing of almost all kinds of nanomaterials using...

ASTM E3171-21a - Standard Test Method for Determination of Total Silver in Textiles by ICP-OES or ICP-MS Analysis
August 1, 2021 - ASTM International

1.1 This test method covers the use of inductively coupled plasma-optical emission spectrometry (ICP-OES) and inductively coupled plasma-mass spectrometry (ICP-MS) analyses for determination of the mass fraction of total silver in consumer textile products made of any combination of natural or...

Nanomaterials and Nanocomposites Characterization, Processing, and Applications
April 6, 2021 - CRC

Nanomaterials and Nanocomposites: Characterization, Processing, and Applications discusses the most recent research in nanomaterials and nanocomposites for a range of applications as well as modern characterization tools and techniques. It deals with nanocomposites that are dispersed...

Nanostructured Multifunctional Materials Synthesis, Characterization, Applications and Computational Simulation
January 1, 2021 - CRC

The development of nanomaterials plays a fundamental role in current and future technology applications, particularly nanomaterials that have multiple functionalities. This book provides a broad overview of the effect of nanostructuring in the multifunctionality of different widely...

The ESLI Handbook of Nanotechnology: Risk, Safety, ESLI and Commercialization
May 28, 2021 - WILEY

This Handbook focuses on the recent advancements in Safety, Risk, Ethical Society and Legal Implications (ESLI) as well as its commercialization of nanotechnology, such as manufacturing. Nano is moving out of its relaxation phase of scientific route, and as new products go to market, organizations...

Advertisement