loading
FORD WSB-M7H29-B - WEBBING, POLYESTER, NEEDLE LOOM, SAFETY BELT ***TO BE USED WITH FORD WSS-M99P1111-A***
March 4, 2010 - FORD

The material defined by this specification is a polyester seat belt webbing woven with continuous filament yarn and finished selvages. Proper dyes and dyeing procedures shall be employed to provide acceptable colors, appearance, and physical properties. Color stripping for redyeing of webbing...

DS/ISO 22236 - Traditional Chinese medicine – Thread-embedding acupuncture needle for single use
June 8, 2020 - DS

This document specifies the safety requirements for the thread-embedding acupuncture needle. It is applicable to only the needle part of thread-embedding acupuncture needles and excludes medical thread.

ISO 22236 - Traditional Chinese medicine — Thread-embedding acupuncture needle for single use
June 1, 2020 - ISO

This document specifies the safety requirements for the thread-embedding acupuncture needle. It is applicable to only the needle part of thread-embedding acupuncture needles and excludes medical thread.

A-A-55306 - NEEDLE, SAILMAKER'S
January 29, 1997 - NPFC

This document covers needles intended to be used by sailmakers for sewing and repairing canvas.

ASTM A908-24 - Standard Specification for Stainless Steel Needle Tubing
August 15, 2024 - ASTM International

1.1 This specification covers austenitic, stainless steel, needle tubing in hard-drawn tempers for industrial applications. 1.2 In general, needle tubing describes small-diameter tubing with outside diameters (ODs) in the range of 0.008 to 0.203 in. (0.2 to 5.2 mm) with nominal wall...

ASTM D1321-24a - Standard Test Method for Needle Penetration of Petroleum Waxes
December 15, 2024 - ASTM International

1.1 This test method covers the empirical estimation of the consistency of waxes derived from petroleum by measurement of the extent of penetration of a standard needle. This test method is applicable to waxes having a penetration of not greater than 250. Note 1: This test method is similar...

ASTM D1321-24 - Standard Test Method for Needle Penetration of Petroleum Waxes
May 1, 2024 - ASTM International

1.1 This test method covers the empirical estimation of the consistency of waxes derived from petroleum by measurement of the extent of penetration of a standard needle. This test method is applicable to waxes having a penetration of not greater than 250. Note 1: This test method is similar...

ASTM D1321-23 - Standard Test Method for Needle Penetration of Petroleum Waxes
December 1, 2023 - ASTM International

1.1 This test method covers the empirical estimation of the consistency of waxes derived from petroleum by measurement of the extent of penetration of a standard needle. This test method is applicable to waxes having a penetration of not greater than 250. Note 1: This test method is similar...

ASTM D1321-16a - Standard Test Method for Needle Penetration of Petroleum Waxes
July 1, 2016 - ASTM International

1.1 This test method covers the empirical estimation of the consistency of waxes derived from petroleum by measurement of the extent of penetration of a standard needle. This test method is applicable to waxes having a penetration of not greater than 250. Note 1: This test method is similar...

ASTM D1321-16 - Standard Test Method for Needle Penetration of Petroleum Waxes
June 1, 2016 - ASTM International

1.1 This test method covers the empirical estimation of the consistency of waxes derived from petroleum by measurement of the extent of penetration of a standard needle. This test method is applicable to waxes having a penetration of not greater than 250. Note 1: This test method is similar...

ASTM D1321-10(2015) - Standard Test Method for Needle Penetration of Petroleum Waxes
April 1, 2015 - ASTM International

1.1 This test method covers the empirical estimation of the consistency of waxes derived from petroleum by measurement of the extent of penetration of a standard needle. This test method is applicable to waxes having a penetration of not greater than 250. Note 1: This test method is similar...

JIS T 3235 - Endoscope puncture needle
July 29, 2011 - JSA

This Standard specifies endoscope puncture needles for the purpose of injecting the medicinal products, etc. into the gastrointestinal tract through an endoscope (hereafter referred to as "puncture needles"). Moreover, JIS T 3235 : 2005 may be applied until July 28th, 2014.

GMKOREA EDS-M-6204 - NEEDLE FLEECE CARPET
September 1, 2010 - GMKOREA

Introduction Note: Nothing in this standard supersedes applicable laws and regulations. Note: In the event of conflict between the Korean and English language, the Korean language shall take precedence. Purpose. This specification specifies the requirements of basic property for the needle...

ASTM D1321-10 - Standard Test Method for Needle Penetration of Petroleum Waxes
May 1, 2010 - ASTM International

1.1 This test method covers the empirical estimation of the consistency of waxes derived from petroleum by measurement of the extent of penetration of a standard needle. This test method is applicable to waxes having a penetration of not greater than 250. Note 1-This test method is similar...

ASTM D1321-04 - Standard Test Method for Needle Penetration of Petroleum Waxes
November 1, 2004 - ASTM International

1.1 This test method covers the empirical estimation of the consistency of waxes derived from petroleum by measurement of the extent of penetration of a standard needle. This test method is applicable to waxes having a penetration of not greater than 250. Note 1-This test method is similar...

GMKOREA EDS-M-6205 - Needle Fleece Carpet
September 1, 2010 - GMKOREA

Introduction Note: Nothing in this standard supersedes applicable laws and regulations. Note: In the event of conflict between the Korean and English language, the Korean language shall take precedence. Purpose. This specification specifies the requirements of basic property for the needle...

GMKOREA EDS-M-6206 - Needle Fleece Carpet
September 1, 2010 - GMKOREA

Introduction Note: Nothing in this standard supersedes applicable laws and regulations. Note: In the event of conflict between the Korean and English language, the Korean language shall take precedence. Purpose. This specification specifies the requirements of basic property for the needle...

DS/EN ISO 21649 - Needle-free injectors for medical use – Requirements and test methods
October 22, 2009 - DS

This International Standard applies to safety and performance and testing requirements for single-use and multiple-use needle-free injection systems intended for human use in clinics and other medical settings and for personal use by patients. The dose chamber of the injection system...

A-A-54773 - NEEDLE, HYPODERMIC, DISPOSABLE
March 15, 1994 - NPFC

The General Services Administration has authorized the use of this Commercial Item Description This Commercial Item Description covers sterile, disposable, hypodermic needles.

ASTM F2878-19(2024) - Standard Test Method for Protective Clothing Material Resistance to Hypodermic Needle Puncture
November 1, 2024 - ASTM International

1.1 This test method is used to determine the force required to cause a sharp-edged hypodermic needle to penetrate through protective clothing material. The standard describes three needles that may be used: 21, 25, or 28 gauge needles. 1.2 The values stated in SI units are to...

Advertisement