5.1 This test method is used to measure viscoelastic properties through the strain softening effects of a strain amplitude sweep (the Payne Effect). 5.2 For the uncured state, the time conditioning and strain amplitude strain sweeps can relate to colloidal silica particle or carbon black...
5.1 This test method is based on the Payne Effect. It is a reasonable approach to evaluate the compound's filler-network formation to quantify the degree of silanization in a silica-filled rubber using a rotorless oscillating shear rheometer for the measurement of the strain softening. 5.2...
5.1 Non-isothermal stress relaxation, also known as temperature scanning stress relaxation, performed at a specific heating rate, delivers a set of parameters useful to specify the properties of thermo-plastic elastomers. It can also characterize the deterioration of the cross-linked rubber...
1.1 This guide addresses only primary safety concerns, easements, constructability, liability of the various parties, and risk management related to constructing, installing, maintaining, or changing an optical fiber network in an existing sewer. 1.2 The text of this standard references...
1.1 This guide is designed for application at a wide range of sediment sites where non-aqueous phase liquid (NAPL) is present or suspected to be present. This guide describes emplacement mechanisms that can result in NAPL presence within sediment and how the characteristics of the sediment, aquatic...
1.1 This guide provides guidance for connected consumer products, as defined in 1.1.1, as it relates to physical product safety hazards created by virtue of their connectivity. It applies to connected products that need testing and evaluation to prevent cybersecurity vulnerabilities and weaknesses...
This specification covers the powder forged ferrous materials fabricated by hot densification of atomized prealloyed or iron powders and intended for use as structural parts. The strcutural parts shall be made by hot forging of powder metallurgy preforms in confined dies with or without subsequent...
4.1 This test method is used to evaluate the suitability of powdered rubber chemicals, particularly accelerators, for use in rubber compounds that require very small particle clusters to achieve a uniform cross-linked network. This test method is intended to be used to ensure that no...
5.1 The reactivity and instability of O3 precludes the storage of O3 concentration standards for any practical length of time, and precludes direct certification of O3 concentrations as SRMs. Moreover, there is no available SRM that can be readily and directly adapted to the generation of O3...
3.1 This test method is used to evaluate sulfur for suitability as a rubber vulcanizing agent. Sulfur particles must be small enough to dissolve in rubber during cure to produce a uniform network of cross-links. This test method is used as a quality control method to ensure that large...
3.1 This test method is used to evaluate sulfur for suitability as a rubber vulcanizing agent. Sulfur particles must be significantly small enough to dissolve in rubber during cure and produce a uniform network of cross-links. This test method is used as a quality control method to ensure...
1.1 These practices cover the collection of visible powders that are suspected biological agents and toxins from solid nonporous surfaces using a bulk collection method, using a dry swab and laminated card, followed by a swab sampling method using a sterile moistened swab. Bulk powder samples are...
5.1 This section elaborates how the GMPC may be used in the context of the two main approaches to managing the execution of transportation mentioned in 5.2. These elaborations do not go into every possible detail of these approaches. The purpose of the elaborations is to provide an outline of the...
5.1 This section elaborates how the GMPC may be used in the context of the two main approaches to managing the execution of transportation mentioned in 4.8. These elaborations do not go into every possible detail of these approaches. The purpose of the elaborations is to provide an outline of the...
5.1 NDT measurement of pavement surface deflections provides information that can be used for the structural evaluation of new or in-service pavements. These deflection measurements may be used to determine the following pavement characteristics: 5.1.1 Modulus of each layer. 5.1.2 Overall stiffness...
4.1 This section provides a description of the environmental conditions listed in Section 1 and describes the sub-conditions within each condition. Examples provided for many of the conditions and sub-conditions are provided as guidance only. Each of the conditions described should be evaluated and...
1.1 Data Sharing Security Measures-This standard presents an opportunity to share more thorough, reliable upstream data, in a way that also preserves and protects companies' intellectual property and upstream documents. The use of a technology platform, underpinned by a distributed ledger, that is,...
1.1 This guide describes factors to consider when developing, selecting, and using a surrogate material for evaluating the operational performance of nucleic acid-based on-site biological assessment technologies. Operational performance includes the workflow, technology, operator, controls, and...
4.1 The degree of deacetylation of chitosan, as well at the molar mass and molar mass distribution, determines the functionality of chitosan in an application. For instance, functional and biological effects are highly dependent upon the composition and molar mass of the polymer. 4.2 This test...
3.1 This test method provides a measure of rheological non-linearity for filled rubber compounds under oscillatory shear conditions: the normalized 3rd harmonic of the torque I3/1. 3.2 Rheological linearity means that the modulus is a function of frequency only. The shear modulus dependency on both...
Narrow Your Results