loading
AIHA NOISE & HEARING - THE NOISE MANUAL
AIHA
A description is not available for this item.
NOISE-VIBRATION PROBLEM - NOISE-VIBRATION PROBLEM-SOLUTION WORKBOOK
AIHA
A description is not available for this item.
IEEE ELECTRICAL NOISE: - ELECTRICAL NOISE: FUNDAMENTAL AND SOURCES
IEEE
A description is not available for this item.
ASTM E3168-20a(2026) - Standard Practice for Determining Low-Contrast Visual Acuity of Radiographic Interpreters
July 1, 2026 - ASTM International

1.1 This practice details the procedure for determining the low-contrast visual acuity of a radiographic interpreter by evaluating the ability of the individual to detect linear images of varying radiographic noise, contrast, and sharpness. No statement is made regarding the applicability of...

ASTM E1419/E1419M-26 - Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission
May 1, 2026 - ASTM International

5.1 Because of safety considerations, regulatory agencies (for example, U.S. Department of Transportation) require periodic examinations of vessels used in transportation of industrial gases (see Section 49, Code of Federal Regulations). The AE examination has become accepted as an alternative to...

ASTM C901-26 - Standard Guide for Design and Installation of Prefabricated Masonry Elements
June 1, 2026 - ASTM International

4.1 This guide is intended to provide information and guidance for designers, specifiers, manufacturers, contractors and users that are considering the use of prefabricated masonry elements. This guide identifies situations when prefabrication could be considered where other prefabricated systems...

ASTM E569/E569M-26 - Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation
May 1, 2026 - ASTM International

5.1 Controlled stimulation, that is, the application of mechanical or thermal load, can generate AE from flawed areas of the structure. Sources may include flaw growth, oxide fracture, crack face stiction and release on load application, and crack face rubbing. 5.2 The load range above normal...

ASTM D6932/D6932M-26 - Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Asphalt Mixtures
May 1, 2026 - ASTM International

4.1 This guide provides information to assist engineers with the design requirements and construction guidelines for paving an open-graded friction course (OGFC) surface layer. An OGFC is primarily used to improve the skid resistance and wear resistance of an asphalt pavement by providing an escape...

ASTM D8112-26 - Standard Guide for Sampling, In-Service Lubricating Oils and Hydraulic Fluids in Industrial Applications
May 1, 2026 - ASTM International

5.1 Analyzing in-service lubricating oil and hydraulic fluid samples is crucial for assessing the condition of both the fluid and the equipment. The results of the fluid analysis guide the planning of any necessary corrective maintenance activities. 5.2 The objective of this guide is to support...

ASTM E1324-21(2026) - Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments
May 1, 2026 - ASTM International

1.1 This guide describes procedures for electronically measuring the following performance-related characteristics of some sections of ultrasonic instruments: 1.1.1 Power Supply Section: ??????line regulation, ???????battery discharge time, and ???????battery charge time. 1.1.2 Pulser...

ASTM E477-26 - Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
February 1, 2026 - ASTM International

1.1 This test method covers the laboratory testing of some of the acoustical properties of sound attenuating devices including duct liner materials, integral ducts, and in-duct absorptive straight and elbow silencers used in the ventilation systems of buildings. Procedures are described for the...

ASTM E2677-26 - Standard Test Method for Estimating Limits of Detection in Trace Detectors for Explosives and Drugs of Interest
March 1, 2026 - ASTM International

5.1 Commercial trace detectors are used by first responders, security screeners, the military, and law enforcement to detect and identify explosive threats and drugs of interest quickly. These trace detectors typically operate by detecting chemical agents in residues and particles sampled from...

ASTM E3517/E3517M-26 - Standard Practice for Flaw Sizing using Total Focusing Method
February 1, 2026 - ASTM International

5.1 Flaws that are made during manufacturing or that occur during service of a component have the potential to cause the component to fail. NDT methods such as described in Practice E2700 are intended to locate flaws that have the potential to result in component failure. Since not all flaws will...

ASTM F1768-97(2025) - Standard Guide for Using Whistle Signals During Rope Rescue Operations
December 1, 2025 - ASTM International

3.1 Whistle signals are a simple and effective means of communication between rescuers and those operating a rope-raising or rope-lowering system. They may be used as a primary means of communication or as a backup when radios fail or when ambient noise makes them unintelligible. 3.2 These...

ASTM E3492-25 - Standard Practice for Commonly Referenced Acoustical Calculation Procedures
October 1, 2025 - ASTM International

5.1 The general approach to adjusting measurements for the presence of background noise is to subtract the background noise from the average level measurement, leaving only the adjusted average level. The procedure is to make two otherwise identical measurements in any order, and then...

ASTM E336-25a - Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
November 1, 2025 - ASTM International

1.1 The sound isolation between two spaces in a building is influenced most strongly by a combination of the direct transmission through the separating partition between the spaces (as normally measured in a laboratory) and any transmission along a number of indirect paths, referred to as flanking...

ASTM E3076-25 - Standard Practice for Determination of the Slope in the Linear Region of a Test Record
December 15, 2025 - ASTM International

1.1 This practice presents an automated, objective linear-fitting method for determining the slope of the linear portion of a test record that was studied through two analytical round-robin test programs (1). The method assumes that there is a linear region early in the test record where the value...

Advertisement