loading
TIA OFFICE BUILDING SET - TIA OFFICE BUILDING STRUCTURED CABLING SET OF 6 TIA TR-42 STANDARDS. *** YOU SAVE 25% WHEN PURCHASING AS A SET ***
TIA

This focused set of TIA Standards enables the planning and installation of a structured data/phone cabling system for office-oriented networks. Supporting Standards for pathways & spaces, administration, bonding & grounding, and building automation systems are included. These Standards...

NEMA GUIDE TO OFFICE - GUIDE TO OFFICE LIGHTING AND PRODUCTIVITY
NEMA
A description is not available for this item.
NLB GUIDE TO OFFICE - NLB GUIDE TO OFFICE LIGHTING AND PRODUCTIVITY
NLB
A description is not available for this item.
ASTM D6008-26 - Standard Practice for Determining the Environmental Condition of Federal Property
April 1, 2026 - ASTM International

1.1 Purpose-The purpose of this practice is to define good commercial and customary practice in the United States for assessing the environmental condition of property (ECP) of federal real property. This practice applies to property under consideration for lease, excess and surplus property at...

ASTM E1374-18(2025) - Standard Guide for Office Acoustics and Applicable ASTM Standards
August 1, 2025 - ASTM International

4.1 This guide is intended for the use of architects, engineers, office managers, and others interested in designing, specifying, or operating office environments. 4.2 It is not intended to be applied to other environments, for example, open plan schools. 4.3 While this guide attempts...

ASTM D4674-25 - Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments
September 1, 2025 - ASTM International

1.1 This practice covers the basic principles and operating procedures for using fluorescent light to determine color stability of plastics when materials are exposed in typical office environments where fluorescent overhead lighting and window-filtered daylight are used for illumination and...

ASTM E2619/E2619M-26 - Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings
January 1, 2026 - ASTM International

1.1 This practice covers how to measure certain characteristics of a building, known as building loss features, inside the exterior gross area of a floor and how to calculate the amount of actual and effective floor area that will be not be available for the placement of people's workplaces,...

ASTM D7338-26 - Standard Guide for Assessment Of Fungal Growth in Buildings
January 1, 2026 - ASTM International

1.1 This guide provides a compendium of information and a menu of options for assessment of fungal growth in buildings, but does not recommend a specific course of action. Due to the wide variety of fungal problems affecting buildings and their occupants, and the wide variety of buildings, it is...

ASTM F3803-26 - Standard Guide for Applying Goods Movement Process Codes in Common Approaches to Transport Management
January 1, 2026 - ASTM International

5.1 This section elaborates how the GMPC may be used in the context of the two main approaches to managing the execution of transportation mentioned in 4.8. These elaborations do not go into every possible detail of these approaches. The purpose of the elaborations is to provide an outline of the...

ASTM D6207-03(2025)e1 - Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
November 1, 2025 - ASTM International

1.1 This test method covers the determination of the dimensional stability of fabrics that are intended for use on panel and screen systems to cycled changes in humidity and temperature. 1.1.1 Panel and screen systems include acoustic panels, free standing screens, office partitions, and...

ASTM F3427-25 - Standard Practice for Documenting Environmental Conditions for Utilization with Exoskeleton Test Methods
November 1, 2025 - ASTM International

4.1 This section provides a description of the environmental conditions listed in Section 1 and describes the sub-conditions within each condition. Examples provided for many of the conditions and sub-conditions are provided as guidance only. Each of the conditions described should be evaluated and...

ASTM E336-25 - Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
August 1, 2025 - ASTM International

1.1 The sound isolation between two spaces in a building is influenced most strongly by a combination of the direct transmission through the separating partition between the spaces (as normally measured in a laboratory) and any transmission along a number of indirect paths, referred to as flanking...

ASTM F3474-25 - Standard Practice for Establishing Exoskeleton Functional Ergonomic Parameters and Test Metrics
June 15, 2025 - ASTM International

3.1 This practice describes what measure should be performed during the near (hours/days), mid (days/weeks), and far (months/years) stages of exoskeleton evaluation (Fig. 1). The functional conditions and metrics with respect to each task method are assessed from the body area(s) impacted by the...

ASTM E2083-24 - Standard Classification for Building Construction Field Requirements, and Office Overhead & Profit
November 1, 2024 - ASTM International

This standard covers a classification for field requirements, office overhead, and profit for use in construction estimating. This classification is common to all forms of construction, and its components are an integral part of any construction cost estimate. The classification serves as a...

ASTM E3488-25 - Standard Guide for Moving Sites to Closure (MStC) for Petroleum Underground Storage Tank (UST) Releases
April 1, 2025 - ASTM International

4.1 This guide is intended for use primarily by responsible parties, corrective action professionals, regulators, and others who desire to secure regulatory closure or an NFA certification from the applicable regulatory oversight agency at petroleum UST sites requiring corrective actions. While the...

ASTM D6670-25 - Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products
February 1, 2025 - ASTM International

1.1 This practice is intended for determining volatile organic compound (VOC) emissions from materials and products (building materials, material systems, furniture, consumer products, etc.) and equipment (printers, photocopiers, air cleaners, etc.) under environmental and product usage conditions...

ASTM E3460-24 - Standard Guide for Climate and Community Mapping
December 1, 2024 - ASTM International

1.1 This ASTM guide identifies publicly available tools that screen communities threatened by climate change and multi-source environmental pollution. 1.2 The guide provides resources including a process for selecting the appropriate tool(s) to help make decisions that meet regulatory requirements...

ASTM E3014-24 - Standard Practice for Managing Sustainability in Dentistry
September 1, 2024 - ASTM International

1.1 This practice provides a set of generally recognized activities to govern management of sustainability in dentistry and related dental service practice. It is a management system framework that assists dentists and dental service organizations to enhance their organizational performance and...

ASTM E3429-24 - Standard Guide for Property Resilience Assessments
October 1, 2024 - ASTM International

1.1 This guide covers a generalized, systematic approach for conducting a Property Resilience Assessment (PRA) consisting of three stages: Stage 1, identifying the natural hazards likely to affect a property; Stage 2, evaluating the risks posed by those hazards along with the capacity of the target...

Advertisement