loading
API OIL WELL CEMENT - OIL-WELL CEMENTING PRACTICES IN THE UNITED STATES
January 1, 1959 - API

FOREWORD: Each year in the United States several thousand wells are drilled and completed - some productive of oil or gas and some dry - and during this drilling and completion most of these wells are cased, with the casing set in the bore hole surrounded by oil-well cement. This book...

SWRI SEALANTS - SEALANTS: THE PROFESSIONALS' GUIDE
SWRI
A description is not available for this item.
ASTM D5662-23 - Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers
November 1, 2023 - ASTM International

1.1 This test method2 covers the determination of the compatibility of automotive gear oils with specific nitrile, polyacrylate, and fluoroelastomer oil seal materials. 1.2 Users of this test method should obtain Test Methods D412, D471, and D2240 and become familiar with their use...

FORD ESE-M8G66-A - OIL SEAL, POLYACRYLIC RUBBER
July 14, 1978 - FORD

1. SCOPE: The material defined by this specification is a polyacrylic rubber compound suitable for oil seals.

ASTM D7216-25 - Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
July 1, 2025 - ASTM International

5.1 Some engine oil formulations have been shown to lack compatibility with certain elastomers used for seals in automotive engines. These deleterious effects on the elastomer are greatest with new engine oils (that is, oils that have not been exposed to an engine's operating...

NAVISTAR CEMS D-27 - VOID - Radial Lip Oil Seals
April 1, 2009 - NAVISTAR

1.0 SCOPE This specification covers the requirements for radial lip oil seals used in the Company's products to retain lubricants and exclude dirt particles, water and other contaminants.

ASTM D5662-19a - Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers
November 1, 2019 - ASTM International

1.1 This test method2 covers the determination of the compatibility of automotive gear oils with specific nitrile, polyacrylate, and fluoroelastomer oil seal materials. 1.2 Users of this test method should obtain Test Methods D412, D471, and D2240 and become familiar with their use...

ASTM D5662-19 - Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers
July 1, 2019 - ASTM International

1.1 This test method2 covers the determination of the compatibility of automotive gear oils with specific nitrile, polyacrylate, and fluoroelastomer oil seal materials. 1.2 Users of this test method should obtain Test Methods D412, D471, and D2240 and become familiar with their use...

ASTM D5662 - Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers
November 1, 2019 - ASTM

This test method2 covers the determination of the compatibility of automotive gear oils with specific nitrile, polyacrylate, and fluoroelastomer oil seal materials. Users of this test method should obtain Test Methods D412, D471, and D2240 and become familiar with their use before...

ASTM D8112-26 - Standard Guide for Sampling, In-Service Lubricating Oils and Hydraulic Fluids in Industrial Applications
May 1, 2026 - ASTM International

5.1 Analyzing in-service lubricating oil and hydraulic fluid samples is crucial for assessing the condition of both the fluid and the equipment. The results of the fluid analysis guide the planning of any necessary corrective maintenance activities. 5.2 The objective of this guide is to...

ASTM D7216-23 - Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
October 1, 2023 - ASTM International

5.1 Some engine oil formulations have been shown to lack compatibility with certain elastomers used for seals in automotive engines. These deleterious effects on the elastomer are greatest with new engine oils (that is, oils that have not been exposed to an engine's operating...

ASTM D8236-26 - Standard Practice for Preparing an Equilibrium Liquid/Vapor Sample of Live Crude Oil, Condensates, or Liquid Petroleum Products Using a Manual Piston Cylinder for Subsequent Liquid Analysis or Gas Analysis
May 1, 2026 - ASTM International

5.1 This practice allows for compositional analysis of the gases in equilibrium with crude oil, condensate, and liquid petroleum products at a 4:1 vapor/liquid ratio at ambient temperature for analysis using typical instrumentation (RGA) already available in typical refinery laboratories....

ASTM D7919-26 - Standard Guide for Filter Debris Analysis (FDA) Using Manual or Automated Processes
June 1, 2026 - ASTM International

5.1 This guide is intended to provide machinery maintenance and monitoring personnel with a guideline for performing filter debris analysis as a means to determine machine condition. Correlating the filter contaminants to 'normal' and 'abnormal' lube system operation provides early indication of a...

ASTM D5662-17a - Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers
October 1, 2017 - ASTM International

1.1 This test method2 covers the determination of the compatibility of automotive gear oils with specific nitrile, polyacrylate, and fluoroelastomer oil seal materials. 1.2 Users of this test method should obtain Test Methods D412, D471, and D2240 and become familiar with their use...

PIP PN01SA0B01 - Piping Material Specification 1SA0B01 Class 150, 304/304L Stainless Steel, Butt Weld, C.A. - None, Lube Oil, Seal Oil & Control Oil
December 1, 2019 - PIP

PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing standards of major industrial users, contractors, or standards organizations. By harmonizing these...

ASTM D239-30(1955) - Method of Test for Burning Quality of Mineral Seal Oil (Withdrawn 1962)
January 1, 2030 - ASTM International
A description is not available for this item.
AMSR25988B - Rubber: Fluorosilicone (FVMQ), Engine Oil / Fuel-Resistant, For Seals in Engine Oil Systems/Fuel Systems
June 27, 2023 - SAE International

This material has resistance to diester-based engine oil (MIL-PRF-7808) and fuel, but usage is not limited to such applications. This material is not suitable for use in synthetic phosphate ester based hydraulic fluids (AS1241) or helicopter transmission lubricating oils (DOD-PRF-85734,...

ASTM D5662-17 - Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers
May 1, 2017 - ASTM International

1.1 This test method2 covers the determination of the compatibility of automotive gear oils with specific nitrile, polyacrylate, and fluoroelastomer oil seal materials. 1.2 Users of this test method should obtain Test Methods D412, D471, and D2240 and become familiar with their use...

ASTM C564-26 - Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
February 1, 2026 - ASTM International

1.1 This specification covers preformed rubber gaskets used to seal joints in cast iron soil pipe and fittings. 1.2 The committee with jurisdiction over this standard is not aware of another comparable standard for materials covered in this standard. 1.3 The values stated in inch-pound units...

ASTM D2628-25 - Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
November 1, 2025 - ASTM International

This specification covers the material requirements for preformed polychloroprene elastomeric joint seals for concrete pavements. The seal consists of a multiple web design and is installed with a lubricant. The seal functions by compression of the seal between the faces...

Advertisement