FOREWORD: Each year in the United States several thousand wells are drilled and completed - some productive of oil or gas and some dry - and during this drilling and completion most of these wells are cased, with the casing set in the bore hole surrounded by oil-well cement. This book...
1.1 These requirements cover oil-fired storage-tank water-heating appliances having a fuel input of not more than 200,000 Btu / hour (60 kW). These requirements do not apply to heaters that include storage vessels having a water capacity of more than 120 US gallons (454...
The prevention and control of volatile organic compound (VOC) emissions from storage tanks containing oil or chemical feedstocks or products is of primary importance, not only for economic reasons (loss of product) but increasingly to minimize the impact on the environment....
This specification· covers material, design, fabrication, erection, and testing requirements for vertical, cylindrical, above-ground, closed and open-top, welded steel storage tanks in various sizes and capacities, for internal pressures approximating atmospheric' pressures. This...
Std. 12-C covers general specifications, including chemical and physical properties by reference to ASTM standards; together with permissible working stresses in welded tank joints and in reinforcement of openings, with complete details on erection, inspection, testing, repairs during...
General This standard establishes minimum requirements for material, design, fabrication, erection, and inspection for vertical, cylindrical, aboveground, closed- and open-top, welded storage tanks in various sizes and capacities for internal pressures approximating atmospheric...
This Standard specifies the method for determining the energy factor for oil-fired storage tank water heaters. This Standard establishes minimum energy efficiency levels for oil-fired storage tank water heaters. This Standard applies to oil-fired...
1.1 This guide covers procedures for establishing a program to monitor the performance of Coating Service Level III lining (and coating) systems in operating nuclear power plants. Monitoring is an ongoing process of evaluating the condition of the in-service lining systems. 1.2 Coating Service...
1.1 The purpose of this guide is to assist practitioners in the development, selection, design, and implementation of interim, short-term, or early action remedies undertaken at sites of waste contamination for the purpose of managing, controlling, or reducing risk posed by environmental site...
Narrow Your Results