loading
IAPMO IGC 183 - Oil/Water Separators and Coalescing Plate Separators
January 1, 2016 - IAPMO

This Standard covers oil/water separators and coalescing plate separators designed to remove petroleum based oils from storm or process water and specifies requirements for materials, physical characteristics, performance testing, and markings....

ULC 656 - OIL-WATER SEPARATORS
July 1, 2014 - ULSE
A description is not available for this item.
IAPMO IGC 325 - OIL/WATER SEPARATORS PERFORMANCE
IAPMO
A description is not available for this item.
API PUBL 421 - Monographs on Refinery Environmental Control - Management of Water Discharges Design and Operation of Oil-Water Separators
February 1, 1990 - API

The purpose of this monograph is to provide design guid- ance on gravity-type oil-water separators for use in petro- leum refineries, to provide practical advice on solving operating problems and improving separator performance, and to present information on the...

MIL-PRF-32654 - OIL/WATER SEPARATOR (OWS), CENTRIFUGAL, 38-LITER (10-GALLON) PER MINUTE
May 19, 2020 - NPFC

Scope. This specification covers a fully automated, electrically powered, self-contained, and skid-mounted 38-liter (10-gallon) per minute centrifugal oil/water separator (OWS) (see 6.10.13) unit capable of providing treatment of oily bilgewater aboard Navy ships to 15 parts...

ASTM D6104-97 - Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
July 10, 1997 - ASTM International

1.1 This practice covers the procedure, any necessary related apparatus and the sampling technique to be used in determining the performance characteristics of oil/water separators subjected to contaminated run-off.

ASTM D6157-97 - Standard Practice for Determining the Performance of Oil/Water Separators Subjected to a Sudden Release
July 10, 1997 - ASTM International

1.1 This practice describes the testing procedure, any necessary related apparatus and the sampling technique to be used in determining the performance characteristics of an oil/water separator subjected to the sudden release of a relatively large quantity of hydrocarbons that...

IAPMO IGC 183 + REDLINE - OIL/WATER SEPARATORS AND COALESCING PLATE SEPARATORS
IAPMO
A description is not available for this item.
ASTM D6104-97(2011) - Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
May 1, 2011 - ASTM International

The Clean Water Act promulgated the implementation of water quality standards and contamination limits for a wide range of pollutants including oil and grease. Specifically, the EPA prohibits "the discharges of oil that cause a film or sheen upon or cause discoloration...

ASTM D6104-97(2017)e1 - Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
December 15, 2017 - ASTM International

5.1 The Clean Water Act promulgated the implementation of water quality standards and contamination limits for a wide range of pollutants including oil and grease. Specifically, the EPA prohibits "the discharges of oil that cause a film or sheen upon or cause...

ASTM D6104-97(2003) - Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
June 10, 2003 - ASTM International

The Clean Water Act promulgated the implementation of water quality standards and contamination limits for a wide range of pollutants including oil and grease. Specifically, the EPA prohibits "the discharges of oil that cause a film or sheen upon or cause discoloration...

ASTM D6157-97(2017)e1 - Standard Practice for Determining the Performance of Oil/Water Separators Subjected to a Sudden Release
December 15, 2017 - ASTM International

5.1 The Clean Water Act promulgated the implementation of water quality standards and contamination limits for a wide range of pollutants including oil and grease. Specifically, the EPA, in 40 CFR Ch. 1, prohibits "the discharges of oil that cause a film or sheen upon or...

ASTM D6157-97(2011) - Standard Practice for Determining the Performance of Oil/Water Separators Subjected to a Sudden Release
May 1, 2011 - ASTM International

The Clean Water Act promulgated the implementation of water quality standards and contamination limits for a wide range of pollutants including oil and grease. Specifically, the USEPA, in 40 CFR Ch. 1, prohibits "the discharges of oil that cause a film or sheen upon or...

ASTM D6157-97(2003) - Standard Practice for Determining the Performance of Oil/Water Separators Subjected to a Sudden Release
June 10, 2003 - ASTM International

The Clean Water Act promulgated the implementation of water quality standards and contamination limits for a wide range of pollutants including oil and grease. Specifically, the USEPA, in 40 CFR Ch. 1, prohibits "the discharges of oil that cause a film or sheen upon or...

ASTM D6104 - Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
July 10, 1997 - ASTM

This practice covers the procedure, any necessary related apparatus, and the sampling technique to be used in determining the performance characteristics of oil/water separators subjected to contaminated run-off. This practice does not address the determination of the...

ASTM D6157 - Standard Practice for Determining the Performance of Oil/Water Separators Subjected to a Sudden Release
July 10, 1997 - ASTM

This practice describes the testing procedure, any necessary related apparatus, and the sampling technique to be used in determining the performance characteristics of an oil/water separator subjected to the sudden release of a relatively large quantity of hydrocarbons that may...

DIN 86735 - Oil-water separators - Tank system for bilge water on seagoing vessels
June 1, 2013 - DIN

Diese Norm gilt für Tanksysteme für Bilgenwasser auf Seeschiffen. Die Aufbereitung erfolgt durch Separationssysteme um eine Meeresverschmutzung zu verhindern. er Anwender ist selbst für die Einhaltung der jeweils geltenden Vorschriften und internationalen Übereinkommen verantwortlich.

MIL-S-52846 - SEPARATORS,OIL-WATER,COALESCER TYPE:FILTER ELEMENT
NPFC
A description is not available for this item.
MIL-S-52851 - SEPARATOR SYSTEM,OIL-WATER,COALESCER-TYPE 5 GPM
NPFC
A description is not available for this item.
MIL-S-12928 - SEPARATORS, OIL AND WATER, COMPRESSED AIR
NPFC
A description is not available for this item.
Advertisement