loading
ASTM D3262-26 - Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
July 1, 2026 - ASTM International

This specification covers machine-made glass-fiber-reinforced thermosetting-resin (fiberglass) pipes such as reinforced thermosetting-resin pipe (RTRP) and reinforced polymer mortar pipe (RPMP; natural polymers not included) for use in gravity-flow systems for conveying sanitary sewage, storm...

ASTM F1281-26 - Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
February 1, 2026 - ASTM International

This specification covers coextruded cross linked polyethylene composite pressure pipe with welded aluminum tube reinforcement between the inner and outer layers. The inner and outer cross linked polyethylene layers are bonded to the aluminum tube by a melt adhesive. Included is a system of...

ASTM F2306/F2306M-25a - Standard Specification for 300 mm to 1500 mm [12 in. to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Non-Pressure Gravity-Flow Storm Sewer and Subsurface Drainage Applications
December 1, 2025 - ASTM International

This specification covers requirements and test methods for annular, corrugated profile wall polyethylene pipe and fittings with an interior liner. The pipe and blow-molded fittings shall be made of virgin PE plastic compound having a cell classification 435400C or 435400 and its carbon black...

ASTM C67/C67M-25 - Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
August 1, 2025 - ASTM International

1.1 These test methods cover procedures for the sampling and testing of brick and structural clay tile. Although not necessarily applicable to all types of units, tests include modulus of rupture, compressive strength, absorption, saturation coefficient, effect of freezing and thawing,...

ASTM F2306/F2306M-25 - Standard Specification for 300 mm to 1500 mm [12 in. to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Non-Pressure Gravity-Flow Storm Sewer and Subsurface Drainage Applications
August 1, 2025 - ASTM International

This specification covers requirements and test methods for annular, corrugated profile wall polyethylene pipe and fittings with an interior liner. The pipe and blow-molded fittings shall be made of virgin PE plastic compound having a cell classification 435400C or 435400 and its carbon black...

ASTM E284-25 - Standard Terminology of Appearance
June 1, 2025 - ASTM International

1.1 This terminology standard defines terms used in the description of appearance, including but not limited to color, gloss, opacity, scattering, texture, and visibility of both materials (ordinary, fluorescent, retroreflective) and light sources (including visual display units). 1.2 It is...

ASTM D3262-25 - Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
July 1, 2025 - ASTM International

This specification covers machine-made glass-fiber-reinforced thermosetting-resin (fiberglass) pipes such as reinforced thermosetting-resin pipe (RTRP) and reinforced polymer mortar pipe (RPMP; natural polymers not included) for use in gravity-flow systems for conveying sanitary sewage, storm...

ASTM F1281-25 - Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
May 1, 2025 - ASTM International

This specification covers coextruded cross linked polyethylene composite pressure pipe with welded aluminum tube reinforcement between the inner and outer layers. The inner and outer cross linked polyethylene layers are bonded to the aluminum tube by a melt adhesive. Included is a system of...

ASTM F1281-25e1 - Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
May 1, 2025 - ASTM International

This specification covers coextruded cross linked polyethylene composite pressure pipe with welded aluminum tube reinforcement between the inner and outer layers. The inner and outer cross linked polyethylene layers are bonded to the aluminum tube by a melt adhesive. Included is a system of...

ASTM C285-24 - Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
November 1, 2024 - ASTM International

3.1 The fineness of the frit has a direct bearing on many of its properties, such as fusibility, tearing, gloss, opacity, suspension in the slip, and ease of spraying.

ASTM F714-25 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
March 1, 2025 - ASTM International

This specification covers polyethylene (PE) pipe made in dimensions based on outside determined range of diameters and larger. The piping is intended for new construction and insertion renewal of old piping systems used for the transport of water, municipal sewage, domestic sewage, industrial...

ASTM D5007-99(2024) - Standard Test Method for Wet-to-Dry Hiding Change
November 1, 2024 - ASTM International

5.1 Many architectural paints, particularly white and light tints, change significantly in film opacity as they dry. An increase in hiding is sometimes associated with porosity and poor film integrity with conventionally formulated coatings. A decrease can result in a disappointing paint job...

ASTM C67/C67M-24 - Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
December 1, 2024 - ASTM International

1.1 These test methods cover procedures for the sampling and testing of brick and structural clay tile. Although not necessarily applicable to all types of units, tests include modulus of rupture, compressive strength, absorption, saturation coefficient, effect of freezing and thawing,...

ASTM D2467-24 - Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
July 1, 2024 - ASTM International

This specification covers the requirements for materials, workmanship, dimensions, and burst pressure of poly(vinyl chloride) plastic Schedule 80 pipe fittings, intended for use with the distribution of pressurized liquids that are chemically compatible with the piping materials. In-line fittings,...

ASTM D2609-24 - Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
April 1, 2024 - ASTM International

This specification covers plastic insert fittings for polyethylene (PE) plastic pipe. The fittings shall be made from one of the following plastics: nylon plastics, propylene plastics, and poly(vinyl chloride) plastics. Dimensions and burst pressure for the fittings should meet the requirements...

ASTM D8090-24 - Standard Test Method for Particle Size Distribution of Paints and Pigments Using Dynamic Imaging Methods
February 1, 2024 - ASTM International

5.1 By following this test method, the particle size, particle size distribution and particle shape of particulates in liquid paint and pigment dispersions can be measured. 5.2 Particle size, particle size distribution and particle shape have a great effect on the color, opacity and gloss of...

ASTM F3659-24 - Standard Guide for Bioinks Used in Bioprinting
March 15, 2024 - ASTM International

4.1 Standard Structure-This standard has been organized according to a typical bioprinting operational workflow. In this way the standard has three main sections: pre-printing considerations, printing considerations, and post-printing considerations. There is also a section on bioprinting...

ASTM D7520-16(2023) - Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere
March 1, 2023 - ASTM International

5.1 Air permits from regulatory agencies often require measurements of opacity from stationary air pollution point sources in the outdoor ambient environment. Opacity has been visually measured by certified smoke readers in accordance with USEPA (USEPA Method 9). DCOT is also a method...

ASTM F1281-24 - Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
February 1, 2024 - ASTM International

This specification covers coextruded cross linked polyethylene composite pressure pipe with welded aluminum tube reinforcement between the inner and outer layers. The inner and outer cross linked polyethylene layers are bonded to the aluminum tube by a melt adhesive. Included is a system of...

ASTM F714-24 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
February 1, 2024 - ASTM International

This specification covers polyethylene (PE) pipe made in dimensions based on outside determined range of diameters and larger. The piping is intended for new construction and insertion renewal of old piping systems used for the transport of water, municipal sewage, domestic sewage, industrial...

Advertisement