loading
MIL-H-42067 - HUMIDIFIER, OPERATING ROOM
June 15, 1989 - NPFC

This specification covers one type of humidifier for use in the operating rooms of the Medical Unit - Self Contained Transportable (MUST).

ASTM F565-26 - Standard Practice for Care and Handling of Orthopedic Implants and Instruments
February 1, 2026 - ASTM International

3.1 Hospital receiving personnel, central supply personnel, operating room personnel, surgeons, and occasionally other individuals will handle orthopedic implants and instruments. All personnel should be informed of recommended care and handling procedures to prevent damage or loss to...

A-A-30042 - FOOTWEAR COVERS, OPERATING ROOM (DISPOSABLE)
NPFC
A description is not available for this item.
A-A-51301 - FOOTWEAR COVERS, OPERATING ROOM (DISPOSABLE)
NPFC
A description is not available for this item.
ASTM F2836-26 - Standard Practice for Gasket Constants for Bolted Joint Design
June 1, 2026 - ASTM International

5.1 This practice determines the room temperature gasket constants Gb and a for initial seating and Gs for operating conditions as related to the tightness behavior of pressurized bolted flanged connections. These constants are used in determining the design bolt load for gasketed...

ASTM E2550-26 - Standard Test Method for Thermal Stability by Thermogravimetry
July 1, 2026 - ASTM International

1.1 This test method describes the assessment of material thermal stability through the determination of the temperature at which the materials start to decompose or react and the extent of the mass change using thermogravimetry. The test method uses minimum quantities of material and is applicable...

ASTM D7826-26 - Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
May 1, 2026 - ASTM International

5.1 This guide is intended for the developers or sponsors of new aviation gasolines or additives to describe the data requirements necessary to support the development of specifications for these new products by ASTM members. The ultimate goal of the data generated in accordance with this guide is...

ASTM D4329-26 - Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics
February 1, 2026 - ASTM International

4.1 The ability of a plastic material to resist deterioration caused by exposure to light, heat, and water is a property of significance in many applications. This practice is intended to induce property changes associated with end-use conditions, including the effects of ultraviolet solar...

ASTM E2780-10(2026) - Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters
January 1, 2026 - ASTM International

1.1 This test method covers the fueling and operating protocol for determining particulate matter emissions from wood fires in wood-burning room heaters and fireplace inserts as well as determining heat output and efficiency. 1.2 The values stated in SI units are to be regarded as the...

ASTM E2779-10(2026) - Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
January 1, 2026 - ASTM International

1.1 This test method covers the fueling and operating protocol for determining particulate matter emissions from fires in pellet or other granular or particulate biomass burning room heaters and fireplace inserts. 1.2 The values stated in SI units are to be regarded as standard. The...

ASTM F2943-25 - Standard Guide for Presentation of End User Labeling Information for Musculoskeletal Implants
March 1, 2025 - ASTM International

1.1 The goal of this guide is to recommend a universal label format (across manufacturers and various implants) of content and relative location of information necessary for final implant selection within an implant's overall package labeling. 1.2 This guide recommends package labeling for...

ASTM E3161-25 - Standard Practice for Preparing a Pseudomonas aeruginosa or Staphylococcus aureus Biofilm using the CDC Biofilm Reactor
September 1, 2025 - ASTM International

5.1 Bacteria that exist in biofilms are phenotypically different from suspended cells of the same genotype. Research has shown that biofilm bacteria are more difficult to kill than suspended bacteria (4, 5). Laboratory biofilms are engineered in growth reactors designed to produce a specific...

ASTM E1007-25 - Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
August 1, 2025 - ASTM International

5.1 The spectrum of the noise produced in the receiving room by the standard tapping machine is determined by (1) the size and the mechanical properties of the floor-ceiling assembly, such as its weight, surface properties, mounting or edge restraints, stiffness, and internal damping; (2)...

ASTM F3427-25 - Standard Practice for Documenting Environmental Conditions for Utilization with Exoskeleton Test Methods
November 1, 2025 - ASTM International

1.1 When conducting test methods, it is important to consider the role that the environmental conditions play in measurement of exoskeleton safety and performance. Exoskeletons are designed to be operated both indoors and outdoors under conditions specified by the manufacturer. Likewise, end...

ASTM F3263-17(2025) - Standard Guide for Packaging Test Method Validation
October 1, 2025 - ASTM International

4.1 Addressing consensus standards with inter-laboratory studies (ILS) and methods specific to an organization. Test methods need to be validated in many cases, in order to be able to rely on the results. This has to be done at the organization performing the tests but is also performed in the...

ASTM D4585/D4585M-25 - Standard Practice for Testing Water Resistance of Coatings Using Single-Sided Controlled Condensation
June 1, 2025 - ASTM International

1.1 This practice covers basic principles and operating procedures for testing water resistance of coatings using single-sided, controlled condensation. 1.2 Condensation is produced by exposing one surface of a coated specimen to a heated, saturated mixture of air and water vapor, while the...

ASTM D2247-25 - Standard Practice for Testing Water Resistance of Coatings in 100?% Relative Humidity
June 1, 2025 - ASTM International

1.1 This practice covers the basic principles and operating procedures for testing water resistance of coatings by exposing coated specimens in an atmosphere maintained at 100?% relative humidity so that condensation forms on all surfaces of test specimens. 1.2 This practice uses the...

ASTM C198-09(2025) - Standard Test Method for Cold Bonding Strength of Refractory Mortar
April 1, 2025 - ASTM International

1.1 This test method covers the determination of the bonding strength of air-setting refractory mortar by determining the flexural strength (modulus of rupture) at room temperature of oven-dried brick-mortar joints. 1.2 The values stated in inch-pound units are to be regarded as standard....

ASTM D7826-25a - Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
April 1, 2025 - ASTM International

5.1 This guide is intended for the developers or sponsors of new aviation gasolines or additives to describe the data requirements necessary to support the development of specifications for these new products by ASTM members. The ultimate goal of the data generated in accordance with this guide is...

ASTM D7826-25 - Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
February 15, 2025 - ASTM International

5.1 This guide is intended for the developers or sponsors of new aviation gasolines or additives to describe the data requirements necessary to support the development of specifications for these new products by ASTM members. The ultimate goal of the data generated in accordance with this guide is...

Advertisement