1.1 This test method covers the determination of the temperature below which solid hydrocarbon crystals may form in aviation turbine fuels. 1.2 The reporting range of freezing point test results considered valid for the applicability of precisions (r and R) and for the purpose of the...
5.1 This test method is used to determine the heat release rate and a number of other fire-test-response characteristics as a result of exposing insulating materials contained in electrical or optical cables to a prescribed initial test heat flux in the cone calorimeter...
1.1 This test method covers testing all wipers used in cleanrooms and other controlled environments for characteristics related to particulate cleanliness. 1.2 This test method includes the use of computer-based image analysis and counting hardware and software for the counting...
4.1 This test method is intended to provide only comparative measurements of surface flame spread and smoke density measurements with that of select grade red oak and fiber-cement board surfaces under the specific fire exposure conditions described herein. 4.2 This test method...
1.1 This test method covers the determination of the temperature below which solid hydrocarbon crystals may form in aviation turbine fuels. 1.2 This test method is designed to cover the freezing point temperature range of -80?ºC to 20?ºC; however, the precision statements were derived...
4.1 This test method is intended to provide only comparative measurements of surface flame spread and smoke density measurements with that of select grade red oak and fiber-cement board surfaces under the specific fire exposure conditions described herein. 4.2 This test method...
5.1 Fibers are frequently encountered in casework, whether it be through the evidentiary item itself (for example, clothing, rope), or through the processing and collection of fibers from evidentiary items. Fibers can be exchanged between individuals, between individuals and...
4.1 This test method is intended to provide only comparative measurements of surface flame spread and smoke density measurements with that of select grade red oak and fiber-cement board surfaces under the specific fire exposure conditions described herein. 4.2 This test method...
5.1 Typically, FT is used to identify flaws that occur in the manufacture of composite structures, or to identify and track flaws that develop during the service lifetime of the structure. Flaws detected with FT include delamination, disbonds, voids, inclusions, foreign object debris, porosity, or...
1.1 This test method covers the measurement of mass fractions of the elements silver (Ag), aluminum (Al), arsenic (As), boron (B), barium (Ba), berylium (Be), bismuth (Bi), calcium (Ca), cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), iron (Fe), potassium (K), lithium (Li), magnesium...
5.1 The procedures in this standard can be used for acceptance testing of commercial shipments of coated and laminated fabrics for architectural use since these test methods have been used extensively in the trade for acceptance testing. Caution is advised, however, when...
5.1 FOSGs are used for measurement applications where the strain of a substrate or displacement between two datums is the measurand of interest. The performance parameters of the FOSG are affected by both the material and optical properties of the FOSG and the respective optical...
Narrow Your Results