loading
GMW16729 - Polycarbonate - Optical Lens
March 1, 2020 - GMW

Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. Purpose/Material Description. This specification describes materials types of unfilled Polycarbonate (PC)...

A-A-59199 - CLEANING COMPOUND, OPTICAL LENS (READY TO USE)
November 12, 2019 - NPFC

This commercial item description (CID) covers two types of ready-to-use cleaning compounds. The cleaning compounds described herein are intended for use in cleaning exposed optical surfaces of optical equipment in the field.

P-C-438 - CLEANING COMPOUND, OPTICAL LENS
NPFC
A description is not available for this item.
ASTM F1776-26 - Standard Specification for Eye, Face, and Head Protective Devices for Paintball Sports
May 1, 2026 - ASTM International

1.1 This specification applies to eye, face, and head protective devices, designed for use by players of the sport of paintball, which minimize or significantly reduce injury to the eye, adnexa of eye, face, and head due to paintball impact or penetration, or both. 1.2 EHPDs by nature provide three...

ASTM F2879-22(2026) - Standard Specification for Eye Protective Devices for Airsoft Sports
May 1, 2026 - ASTM International

1.1 This specification applies to eye protective devices (EPDs) designed for use by participants in the sport of airsoft with 6-mm airsoft projectiles. These EPDs are designed to minimize or significantly reduce injury to the eye and adnexa as a result of impact and penetration of airsoft...

ASTM F803-25 - Standard Specification for Eye Protectors for Selected Sports
September 1, 2025 - ASTM International

1.1 This specification covers eye protectors, designed for use by players of basketball, baseball, and soccer to minimize or significantly reduce injury to the eye and adnexa due to impact and penetration by baseballs and softballs, basketballs, soccer balls, hands, elbows, and fingers. Protective...

MIL-C-13125 - COMPOUND: MOUNTING FOR OPTICAL LENS BLANKS
NPFC
A description is not available for this item.
MIL-C-43454 - CLEANING COMPOUND, OPTICAL LENS (READY TO USE)
NPFC
A description is not available for this item.
ASTM F1776-25 - Standard Specification for Eye, Face, and Head Protective Devices for Paintball Sports
February 1, 2025 - ASTM International

1.1 This specification applies to eye, face, and head protective devices, designed for use by players of the sport of paintball, which minimize or significantly reduce injury to the eye, adnexa of eye, face, and head due to paintball impact or penetration, or both. 1.2 EHPDs by nature provide three...

ASTM E2566/E2566M-24 - Standard Test Method for Evaluating Response Robot Sensing: Visual Acuity
November 1, 2024 - ASTM International

5.1 Various levels of visual acuity are essential when remotely operating robots in unstructured and often hazardous environments. Missions typically include establishing situational awareness, finding available paths, maneuvering through obstacles, identifying objects of interest, and performing...

ASTM F3164-24 - Standard Specification for Eye Protectors for Racket Sports (that is, Racquetball, Squash, Tennis, Pickleball)
November 1, 2024 - ASTM International

1.1 This specification covers eye protectors, designed for use by players of racket sports (that is, racquetball, squash, tennis, pickleball), that minimize or significantly reduce injury to the eye and adnexa due to impact and penetration by racket-sport rackets/paddles and balls. Protective...

ASTM C1648-12(2023) - Standard Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass
July 1, 2023 - ASTM International

4.1 Measurement-The refractive index at any wavelength of a piece of homogeneous glass is a function, primarily, of its composition, and secondarily, of its state of annealing. The index of a glass can be altered over a range of up to 1×10-4?(that is, 1 in the fourth decimal place) by the changing...

ASTM F614 - Standard Test Method for Distortion of Optical Lenses Used in Photomask Fabrication
January 1, 1980 - ASTM

1. Scope 1.1 This test method covers a means for measuring the distortion of optical systems used in the fabrication of photomasks for semiconductor device manufacturing. This test method is intended primarily for lenses used in step-and-repeat systems which operate within the...

Prism and Lens Making: A Textbook for Optical Glassworkers
August 2, 2017 - CRC

Prism and Lens Making: A Textbook for Optical Glassworkers, Second Edition is a unique compendium of the art and science of the optical working of glass for the production of mirrors, lenses, and prisms. Incorporating minor corrections and a foreword by Professor Walter...

ASTM F1776-22 - Standard Specification for Eye Protective Devices for Paintball Sports
May 1, 2022 - ASTM International

1.1 This specification applies to eye, face, and head protective devices, designed for use by players of the sport of paintball, which minimize or significantly reduce injury to the eye, adnexa of eye, face, and head due to paintball impact or penetration, or both. 1.2 EHPDs by nature provide three...

JIS OPTICAL INSTRUMENTS - JIS Optical Instruments Handbook
January 1, 2013 - JSA
A description is not available for this item.
ASTM F614-80(1991)e1 - Test Method for Distortion of Optical Lenses Used in Photomask Fabrication
January 1, 1991 - ASTM International
A description is not available for this item.
ASTM F614-80(1991) - Test Method for Distortion of Optical Lenses Used in Photomask Fabrication (Withdrawn 1996)
January 1, 1980 - ASTM International
A description is not available for this item.
ASTM F1776-21 - Standard Specification for Eye Protective Devices for Paintball Sports
December 1, 2021 - ASTM International

1.1 This specification applies to eye, face, and head protective devices, designed for use by players of the sport of paintball, which minimize or significantly reduce injury to the eye, adnexa of eye, face, and head due to paintball impact or penetration, or both. 1.2 EHPDs by nature provide three...

DIN 58756-1 - Production in optical engineering - Small lenses - Carriages and supporting mounts
May 1, 2015 - DIN

Diese Norm gilt für kleine Linsen mit Durchmessern von 5 mm bis 20 mm und einem Gesamtöffnungswinkel größer 110°. Die Norm legt Maße und Angaben für Tragkörper und Hilfskittstücke fest, die in der Optikfertigung für kleine Linsen zum Aufkitten von Einzelflächen beim Schleifen, Polieren und...

Advertisement