loading
JIS OPTICAL INSTRUMENTS - JIS Optical Instruments Handbook
January 1, 2013 - JSA
A description is not available for this item.
IEEE MAGNETO-OPTICAL - MAGNETO-OPTICAL RECORDING MATERIALS
IEEE
A description is not available for this item.
ASTM F2462-05(2026) - Standard Practice for Operation and Maintenance of Sewers with Optical Fiber Systems
June 1, 2026 - ASTM International

5.1 This is intended to outline O&M issues that require discussion and mutual agreement by both the optical fiber cable owner and sewer pipeline operator. The purpose is developing sufficient written procedures and practices to allow optical fiber systems to coexist as a secondary use...

ASTM F2233-03(2026) - Standard Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers
June 1, 2026 - ASTM International

1.1 This guide addresses only primary safety concerns, easements, constructability, liability of the various parties, and risk management related to constructing, installing, maintaining, or changing an optical fiber network in an existing sewer. 1.2 The text of this standard references...

ASTM D8671-26 - Standard Guide for Determination of Silica and Alumina Molar Ratio in Zeolites by Inductively Coupled Plasma Optical Emission Spectroscopy
June 1, 2026 - ASTM International

1.1 This guide covers the analysis of silicon and aluminum in zeolite by Inductive Coupled Plasma Optical Emission Spectroscopy (ICP-OES). Zeolite samples in powdered form are ultrasonicated with mineral acid mixture (hydrochloric acid and hydrofluoric acid). Zeolite silica and alumina molar...

ASTM E3022-26a - Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
July 1, 2026 - ASTM International

1.1 This practice covers the procedures for testing the performance of ultraviolet A (UV-A), light emitting diode (LED) lamps used in fluorescent penetrant and fluorescent magnetic particle testing (see Guides E709 and E2297, and Practices E165/E165M, E1208, E1209, E1210, E1219, E1417/E1417M, and...

ASTM E1040-10(2026) - Standard Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells
June 1, 2026 - ASTM International

1.1 This specification describes the physical requirements for primary and secondary terrestrial nonconcentrator photovoltaic reference cells. A reference cell is defined as a device that meets the requirements of this specification and is calibrated in accordance with Test Method E1125 or Test...

ASTM E3168-20a(2026) - Standard Practice for Determining Low-Contrast Visual Acuity of Radiographic Interpreters
July 1, 2026 - ASTM International

1.1 This practice details the procedure for determining the low-contrast visual acuity of a radiographic interpreter by evaluating the ability of the individual to detect linear images of varying radiographic noise, contrast, and sharpness. No statement is made regarding the applicability of these...

ASTM F1776-26 - Standard Specification for Eye, Face, and Head Protective Devices for Paintball Sports
May 1, 2026 - ASTM International

This specification applies to eye protective devices, designed for use by players of the sport of paintball that minimize or significantly reduce injury to the eye and adnexa due to impact and penetration of paintballs. Field of view, refractive tolerances, astigmatism, power imbalance, prism...

ASTM F2879-22(2026) - Standard Specification for Eye Protective Devices for Airsoft Sports
May 1, 2026 - ASTM International

This specification covers eye protective devices (EPDs) intended for use in the sport of air soft with 6-mm air soft projectiles. These EPDs are designed to minimize or significantly reduce injury to the eye and adnexa as a result of impact and penetration of air soft projectiles. This...

ASTM C1678-21(2026) - Standard Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses
June 1, 2026 - ASTM International

5.1 Fracture mirror size analysis is a powerful tool for analyzing glass and ceramic fractures. Fracture mirrors are tell-tale fractographic markings in brittle materials that surround a fracture origin as discussed in Practices C1256 and C1322. Fig. 1 shows a schematic with key features identified...

ASTM D6846-02(2026) - Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage
June 1, 2026 - ASTM International

1.1 This practice covers the procedure for preparing laboratory prints of paste inks using a printing gage in conjunction with a flat-bed proof press. 1.2 This practice is applicable to the preparation of solid-area prints by direct letterpress or by dry offset on a flat substrate such as paper,...

ASTM E3022-26 - Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
May 1, 2026 - ASTM International

1.1 This practice covers the procedures for testing the performance of ultraviolet A (UV-A), light emitting diode (LED) lamps used in fluorescent penetrant and fluorescent magnetic particle testing (see Guides E709 and E2297, and Practices E165/E165M, E1208, E1209, E1210, E1219, E1417/E1417M, and...

ASTM E2090-12(2026) - Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
May 1, 2026 - ASTM International

5.1 This test method provides for accurate and reproducible enumeration of particles and fibers released from a wiper immersed in a cleaning solution with moderate mechanical stress applied. When performed correctly, this counting test method is sensitive enough to quantify very low levels of total...

ASTM D4464-26 - Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering
April 1, 2026 - ASTM International

5.1 It is important to recognize that the results obtained by this test method or any other method for particle size determination utilizing different physical principles may disagree. The results are strongly influenced by physical principles employed by each method of particle size analysis. The...

ASTM D8615-26 - Standard Test Method for Freezing Point of Aviation Fuels (Automatic Coaxial Optical Fibers Method)
March 1, 2026 - ASTM International

5.1 The freezing point of an aviation fuel is the lowest temperature at which the fuel remains free of solid hydrocarbon crystals that can restrict the flow of fuel through filters if present in the fuel system of the aircraft. The temperature of the fuel in the aircraft tank normally decreases...

ASTM D817-12(2026) - Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate
February 1, 2026 - ASTM International

7.1 Ash content gives an estimate of the inorganic content of cellulose ester samples. The presence of high levels of inorganic content (ash) can be detrimental to the melt stability and optical clarity of a cellulose ester in melt processing or act as a potential source of insolubles when...

ASTM E84-26a - Standard Test Method for Surface Burning Characteristics of Building Materials
April 1, 2026 - ASTM International

1.1 This fire-test-response standard for the comparative surface burning behavior of building materials is applicable to exposed surfaces such as walls and ceilings. The test is conducted with the specimen in the ceiling position with the surface to be evaluated exposed face down to the ignition...

ASTM D5185-26 - Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
March 1, 2026 - ASTM International

1.1 This test method covers the determination of additive elements, wear metals, and contaminants in used and unused lubricating oils and base oils by inductively coupled plasma atomic emission spectrometry (ICP-AES). The specific elements are listed in Table 1. 1.2 This test method covers the...

ASTM B69-26 - Standard Specification for Rolled Zinc
February 1, 2026 - ASTM International

This specification covers two types of commercial rolled zinc. Type I are coils or sheets cut from strip rolled zinc, and Type II are zinc plates such as boiler and hull plates produced by any rolling method. The products shall be produced by casting, rolling, and other processes found in mill...

Advertisement