loading
AWWA STORAGE SET - AWWA STORAGE SET
AWWA
A description is not available for this item.
ASTM E3488-25 - Standard Guide for Moving Sites to Closure (MStC) for Petroleum Underground Storage Tank (UST) Releases
April 1, 2025 - ASTM International

1.1 This guide is a framework to facilitate moving petroleum underground storage tank (UST) release sites to closure in a manner protective of human and ecological receptors. Alternative ways to assess and address the potential for exposure to human and ecological receptors resulting from...

ASTM D7112-24 - Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
November 1, 2024 - ASTM International

1.1 This test method covers an automated procedure involving titration and optical detection of precipitated asphaltenes for determining the stability and compatibility parameters of refinery residual streams, residual fuel oils, and crude oils. Stability in this context is the ability to...

ASTM D7157-23 - Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils ( n -Heptane Phase Separation; Optical Detection)
March 1, 2023 - ASTM International

5.1 This test method describes a sensitive method for estimating the intrinsic stability of an oil. The intrinsic stability is expressed as S-value. An oil with a low S-value is likely to undergo flocculation of asphaltenes when stressed (for example, extended heated storage) or blended with...

ASTM D7157-22e1 - Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils ( n -Heptane Phase Separation; Optical Detection)
July 1, 2022 - ASTM International

5.1 This test method describes a sensitive method for estimating the intrinsic stability of an oil. The intrinsic stability is expressed as S-value. An oil with a low S-value is likely to undergo flocculation of asphaltenes when stressed (for example, extended heated storage) or blended with...

ASTM D7157-22 - Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils ( n -Heptane Phase Separation; Optical Detection)
July 1, 2022 - ASTM International

5.1 This test method describes a sensitive method for estimating the intrinsic stability of an oil. The intrinsic stability is expressed as S-value. An oil with a low S-value is likely to undergo flocculation of asphaltenes when stressed (for example, extended heated storage) or blended with...

ASTM E1453-20 - Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data
December 1, 2020 - ASTM International

3.1 The provisions of this guide are intended to control and maintain the quality of recorded industrial electronic data from radioscopy and unrecorded magnetic and optical media only, and are not intended to control the acceptability of the materials or products examined. It is...

ASTM E1453 - Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data
December 1, 2020 - ASTM

This guide may be used for the control and maintenance of recorded and unrecorded magnetic and optical media of analog or digital electronic data from industrial radioscopy. Units-The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are...

ARINC 641 - LOGICAL SOFTWARE PART PACKAGING FOR TRANSPORT
November 16, 2020 - ARINC

This standard is intended to be applicable to all aircraft loadable software. The standard may impact a variety of software tools including software data loaders, software mass storage devices, software part creation tools, software distribution tools, and software management tools....

ISO/IEC 29121 - Information technology — Digitally recorded media for information interchange and storage — Data migration method for optical disks for long-term data storage
January 1, 2021 - ISO

This document specifies the data migration method for DVD-R, DVD-RW, DVD-RAM, +R, +RW, CD-R, CD-RW, BD Recordable and BD Rewritable disks for long-term data storage. By applying this document for information storage, digital data can be migrated to a next new disk without loss from...

ASTM E1216-21 - Standard Practice for Sampling for Particulate Contamination by Tape Lift
September 1, 2021 - ASTM International

3.1 The tape lift provides a rapid and simple technique for removing particles from a surface and determining their number and size distribution. 3.2 By using statistically determined sample size and locations, an estimate of the surface cleanliness level of large areas can be made. The user shall...

ISO/IEC 30192 - Information technology — Digitally recorded media for information interchange and storage — 120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Rewritable disk
January 1, 2021 - ISO

This document specifies the mechanical, physical and optical characteristics of a 120 mm rewritable optical disk with a capacity of 25,0 Gbytes or 50,0 Gbytes. It specifies the quality of the recorded and unrecorded signals, the format of the data and the recording method, thereby...

ISO/IEC 30190 - Information technology — Digitally recorded media for information interchange and storage — 120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Recordable disk
January 1, 2021 - ISO

This document specifies mechanical, physical and optical characteristics of a 120 mm recordable optical disk with a capacity of 25,0 Gbytes or 50,0 Gbytes. It specifies the quality of the recorded and unrecorded signals, the format of the data and the recording method, thereby...

ISO/IEC 30191 - Information technology — Digitally recorded media for information interchange and storage — 120 mm Triple Layer (100,0 Gbytes single sided disk and 200,0 Gbytes double sided disk) and Quadruple Layer (128,0 Gbytes single sided disk) BD Recordable disk
January 1, 2021 - ISO

This document specifies the mechanical, physical and optical characteristics of a 120 mm recordable optical disk with a capacity of 100,0 Gbytes, 128,0 Gbytes or 200,0 Gbytes. It specifies the quality of the recorded and unrecorded signals, the format of the data and the recording...

ASTM F3079-14(2020) - Standard Practice for Use of Distributed Optical Fiber Sensing Systems for Monitoring the Impact of Ground Movements During Tunnel and Utility Construction on Existing Underground Utilities
April 1, 2020 - ASTM International

5.1 This practice is intended to assist engineers, contractors and owner/operators of underground utilities and tunnels with the successful implementation of distributed optical fiber sensing for monitoring ground movements prior to construction for site planning and during utility and...

Advertisement