loading
NEMA EN P1 - NEMA 250 Enclosure Types
January 1, 2020 - NEMA

The purpose of this document is to provide general information on the definitions of NEMA enclosure types, a guide for comparing specific applications of enclosures, and a comparison between NEMA enclosure type numbers, and ANSI/IEC enclosure classification designations....

ASTM E2813-26 - Standard Practice for Building Enclosure Commissioning
April 1, 2026 - ASTM International

6.1 This practice is intended to serve as a concise, authoritative, and technically sound practice for building enclosure commissioning (BECx) that is based upon: 6.1.1 The owner project requirements; 6.1.2 Clearly defined and enforceable levels of BECx; and 6.1.3 Minimum core competencies...

AIR5301B - Installed Outdoor Engine Testing
December 18, 2023 - SAE International

This SAE Aerospace Information Report (AIR) was written because of the growing interest in aircraft installed outdoor engine testing by the Federal Aviation Administration, airlines, charter/commercial operators, cargo carriers, engine manufacturers and overhaul and repair stations. This...

ASTM E2947-25 - Standard Guide for Building Enclosure Commissioning
February 15, 2025 - ASTM International

5.1 This guide provides recommendations for the enclosure commissioning process from its project planning through design, construction and occupancy and operation phases. This guide is intended for various building types. Although Practice E2813 defines two levels of enclosure...

IEEE C57.12.31 - Pole-Mounted Equipment—Enclosure Integrity
December 3, 2020 - IEEE

This standard covers conformance tests and requirements for the enclosure integrity of pole-mounted electrical equipment containing apparatus energized in excess of 600 V. These enclosures contain energized electrical apparatus, typically not accessible to the general public,...

ASTM E2336-25 - Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
April 1, 2025 - ASTM International

5.1 These test methods are intended to evaluate the ability of the grease duct enclosure system to do the following: 5.1.1 Resist the effects of a standardized fire exposure, 5.1.2 Retain its integrity, or 5.1.3 Exhibit both properties dependent upon the type of test assembly involved during...

J1976_202205 - Outdoor Weathering of Exterior Materials
May 18, 2022 - SAE International

This test method specifies the exposure racks, black boxes, and instrumentation, which shall be used for the outdoor weathering of materials for automotive exterior application.

ASTM E2813-24 - Standard Practice for Building Enclosure Commissioning
April 15, 2024 - ASTM International

6.1 This practice is intended to serve as a concise, authoritative, and technically sound practice for Building Enclosure Commissioning (BECx) that is based upon: 6.1.1 The Owner Project Requirements; 6.1.2 Clearly defined and enforceable levels of BECx; and 6.1.3 Minimum core competencies...

Predicting Outdoor Sound
March 8, 2021 - CRC

The second edition of Predicting Outdoor Sound is an up-to-date reference on the propagation of sound close to the ground and its prediction. New content includes comparisons between predictions and data for road traffic, railway and wind turbine noise; descriptions of source characteristics...

CEI EN IEC 61969-1 - Mechanical structures for electrical and electronic equipment - Outdoor enclosures Part 1: Design guidelines
February 1, 2021 - CEI

This part of IEC 61969 contains design guidelines for outdoor enclosures and is applicable over a wide field of mechanical, electromechanical and electronic equipment and its installation where a modular design is used. The objectives of this document are: - to provide an overview of...

ATIS 0600003 - Battery Enclosure and Rooms/Areas
May 1, 2018 - ATIS

This standard covers requirements including procedures to identify and manage contaminants and atmospheric conditions that can be present in telecommunications battery rooms and enclosures. Purpose The purpose of this standard is to highlight industry-wide requirements including methods and...

J1012_202312 - Operator Enclosure Pressurization System Test Procedure
December 7, 2023 - SAE International

This SAE Recommended Practice establishes a uniform test procedure for evaluating performance of operator enclosure pressurization systems for construction, general-purpose industrial, agricultural, forestry, and specialized mining machinery as categorized in SAE J1116 for off-road,...

DS/EN IEC 61969-1 - Mechanical structures for electrical and electronic equipment – Outdoor enclosures – Part 1: Design guidelines
July 6, 2020 - DS

This part of IEC 61969 contains design guidelines for outdoor enclosures and is applicable over a wide field of mechanical, electromechanical and electronic equipment and its installation where a modular design is used. The objectives of this document are: - to provide an overview of...

IEC 61969-1 - Mechanical structures for electrical and electronic equipment – Outdoor enclosures – Part 1: Design guidelines
May 1, 2020 - IEC

This part of IEC 61969 contains design guidelines for outdoor enclosures and is applicable over a wide field of mechanical, electromechanical and electronic equipment and its installation where a modular design is used. The objectives of this document are: - to provide an overview of...

IEC 61969-1 REDLINE - Mechanical structures for electrical and electronic equipment – Outdoor enclosures – Part 1: Design guidelines
May 1, 2020 - IEC

This part of IEC 61969 contains design guidelines for outdoor enclosures and is applicable over a wide field of mechanical, electromechanical and electronic equipment and its installation where a modular design is used. The objectives of this document are: - to provide an overview of...

ASTM E2947-21a - Standard Guide for Building Enclosure Commissioning
October 15, 2021 - ASTM International

5.1 This guide provides recommendations for the enclosure commissioning process from its project planning through design, construction and occupancy and operation phases. This guide is intended for various building types. Although Practice E2813 defines two levels of enclosure...

ASTM E2947-21 - Standard Guide for Building Enclosure Commissioning
February 1, 2021 - ASTM International

5.1 This guide provides recommendations for the enclosure commissioning process from its project planning through design, construction and occupancy and operation phases. This guide is intended for various building types. Although Practice E2813 defines two levels of enclosure...

IEEE C57.12.28 - Pad-Mounted Equipment-Enclosure Integrity
May 16, 2014 - IEEE

This standard covers conformance tests and requirements for the integrity of above grade pad-mounted enclosures containing apparatus energized in excess of 600 V that may be exposed to the public including, but not limited to, the following types of equipment enclosures: - Pad-mounted...

AIR5301A - Installed Outdoor Engine Testing
November 29, 2017 - SAE International

This SAE Aerospace Information Report (AIR) was written because of the growing interest in aircraft installed outdoor engine testing by the Federal Aviation Administration, airlines, charter/commercial operators, cargo carriers, engine manufacturers and overhaul and repair stations. This...

GME 60411 - Accelerated Outdoor Exposure
November 23, 2015 - GME

The test serves to evaluate the corrosion protection of organic and/or inorganic coatings (e.g. oil, wax, paint, plastic or metallic subcoatings) on metals under the influence of accelerated outdoor exposure. The check simulates the infiltration initiated by a defined damage of the coating,...

Advertisement