loading
ASTM E1877-21(2026) - Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
July 1, 2026 - ASTM International

5.1 Thermogravimetry provides a rapid method for the determination of the temperature-decomposition profile of a material. 5.2 This practice is useful for quality control, specification acceptance, and research. 5.3 This practice is intended to provide an accelerated thermal endurance estimation in...

ASTM D4713-12(2026) - Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems
June 1, 2026 - ASTM International

4.1 Nonvolatile content of printing inks is useful for specification acceptance between the producer and the user. 4.2 In order to obtain accurate results for heatset systems within the specified 3?h heating time, the specimen film thickness must be less than 100 g/m2, and the oven must have...

ASTM D751-26 - Standard Test Methods for Coated Fabrics
June 1, 2026 - ASTM International

1.1 These test methods cover, but are not limited to, rubber-coated fabrics, that is, tarpaulins, rainwear, and similar products. 1.2 The scope of each of these test methods appears in the section in which the test method is described. 1.3 The test methods appear in the following sections: Test...

ASTM F2075-26 - Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
June 1, 2026 - ASTM International

This specification covers engineered wood fiber for use as a playground safety surface under and around playground equipment. This specification establishes minimum requirements for the factors that determine particle size, consistency, purity, ability to drain, and heavy metal concentrations...

ASTM F1909-98(2026) - Standard Specification for Preformed Open-Cell Sponge Rubber Pail and Drum Gaskets
June 1, 2026 - ASTM International

This specification covers preformed open-cell sponge rubber gaskets, for use in new or reconditioned pails or drums, of the following classes: Class A and Class B, each divided into Grade 1, Grade 2, and Grade 3. Cellular sponge rubber gaskets shall be made by incorporating a blowing agent into the...

ASTM F3051-14(2026) - Standard Test Method for Performance of Cook-and-Hold Ovens
March 1, 2026 - ASTM International

5.1 The energy input rate test is used to confirm that the cook-and-hold oven is operating properly prior to further testing. 5.2 Preheat energy and time can be useful to food service operators to manage power demands and to know how quickly the cook-and-hold oven can be ready for...

ASTM D8668-26 - Standard Test Method for Determining the Peak Stress Energy and Shear Fatigue Resistance of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) Monotonic Shear Strength (MOSS) Test
May 1, 2026 - ASTM International

1.1 This test method covers the determination of asphalt binder peak stress (tf), peak stress energy (Ef), and peak strain (?f) using the monotonic shear strength (MOSS) test. tf, Ef, and ?f can be used to measure the strength, toughness, and strain tolerance of an asphalt binder under constant...

ASTM F2521-09(2026) - Standard Specification for Heavy-Duty Ranges, Gas and Electric
March 1, 2026 - ASTM International

This specification covers heavy-duty ranges that use gas or electrical heat sources, or both, for cooking food in the commercial and institutional food service establishments. Types: type I-electric range top with electric oven; type I-electric range top with gas-fired oven; type...

ASTM C910-16(2026) - Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
April 1, 2026 - ASTM International

This test method details the standard procedures for the determination of the bond and cohesion of one-part elastomeric solvent release-type sealants after high- and low-temperature aging. The materials and apparatuses needed for this test procedure are an extension machine, a forced-draft type...

ASTM D2014/D2014M-25 - Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
November 1, 2025 - ASTM International

4.1 The values determined in this test method indicate to what extent a given coal or coal blend will expand or contract during the carbonization process when evaluated in terms of pertinent experience with other coals and coal blends and processing conditions used in commercial-type coke...

ASTM D3525-20(2026)e1 - Standard Test Method for Gasoline Fuel Dilution in Used Gasoline Engine Oils by Wide-Bore Capillary Gas Chromatography
March 15, 2026 - ASTM International

1.1 This test method describes a gas chromatographic technique for determining the amount of gasoline fuel dilution in used lubricating oils arising from their use in gasoline engines. 1.2 This test method is limited to gas chromatographs accommodating wide-bore (0.53?mm) capillary columns and that...

ASTM D4643-25 - Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating
October 1, 2025 - ASTM International

1.1 This test method outlines procedures for determining the water content of soils by incrementally drying soil in a microwave oven. The test specimens called "soils" in this test method can include any amount of rock and gravel. 1.2 This test method can be used as a substitute for Test...

ASTM F1815-11(2026) - Standard Test Methods for Saturated Hydraulic Conductivity, Water Retention, Porosity, and Bulk Density of Athletic Field Rootzones
March 1, 2026 - ASTM International

These test methods cover the standard procedures and related calculations for determining the saturated hydraulic conductivity, water retention, porosity, and bulk density of sand-based root zone mixtures used in the construction and topdressing of golf course putting greens including United States...

ASTM F1360-25a - Standard Specification for Ovens, Microwave, Electric
December 1, 2025 - ASTM International

This specification covers commercial microwave ovens. These ovens use ultrahigh frequency electromagnetic radiation in the approved industrial, scientific, and medical bands to defrost, heat, and cook food. The microwave ovens are classified by types, sizes, groups, styles, and...

ASTM D7876-26 - Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants
March 1, 2026 - ASTM International

5.1 Often it is necessary to dissolve the sample, particularly if it is a solid, before atomic spectroscopic measurements. It is advantageous to use a microwave oven for dissolution of such samples since it is a far more rapid way of dissolving the samples instead of using the traditional...

ASTM C1953/C1953M-26 - Standard Test Method for Water Content in Fresh Cementitious Mixtures by Rapid Evaporation
February 1, 2026 - ASTM International

5.1 This test method provides a procedure to determine the total water content in a sample of a fresh hydraulic cementitious mixture by determining the change in mass of the sample after rapid evaporation using a furnace capable of maintaining an air temperature between 790 °C and 815 °C [1450 °F...

ASTM D3045-18(2026) - Standard Practice for Heat Aging of Plastics Without Load
February 1, 2026 - ASTM International

4.1 The use of this practice presupposes that the failure criteria selected to evaluate materials (that is, the property or properties being measured as a function of exposure time) and the duration of the exposure can be shown to relate to the intended use of the materials. 4.2 Plastic materials...

ASTM E2686-09(2026) - Standard Test Method for Volatile Organic Compound (VOC) Solvents Absorbed/Adsorbed By Simulated Soil Impacted by Pesticide Emulsifiable Concentrate (EC) Applications
February 1, 2026 - ASTM International

1.1 This test method simulates the application of an emulsion of a pesticide emulsifiable concentrate (EC) to soil with high organic matter (corn cob granules) and to soil with high inorganic matter (clay granules) and determines the amount of solvent retained by the granules, and withheld from the...

ASTM D3530-20(2025) - Standard Test Method for Volatiles Content of Composite Material Prepreg
December 15, 2025 - ASTM International

1.1 This test method covers the determination of the volatiles content, in mass percent of composite material prepregs. This standard focuses on composites with thermosetting resins, which tend to lose a few percent of the matrix mass when heated due to loss of both retained water and low molecular...

ASTM D1754/D1754M-20(2025) - Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
November 1, 2025 - ASTM International

5.1 This method indicates approximate change in properties of asphalt during conventional hot-mixing at about 150?°C [302?°F] as indicated by viscosity, penetration, or ductility measurements. It yields a residue which approximates the asphalt condition as incorporated in the pavement. If the...

Advertisement