loading
JIS K 1101 - Oxygen
March 21, 2017 - JSA

This Japanese Industrial Standard specifies (liquefied or compressed) oxygen for industrial use fed into a high pressure gas vessel (hereafter referred to as oxygen). WARNING 1 Liquefied oxygen has extremely low temperature such as approximately -183°C at atmospheric pressure,...

GME B 040 0562 - Oxygen
March 1, 2021 - GME
A description is not available for this item.
CGA G-4 - OXYGEN
January 1, 2015 - CGA/GAS
A description is not available for this item.
GME B 040 0776 - Oxygen
December 3, 2014 - GME

Application: As gas for welding and cutting operations

MIL-PRF-25508 - PROPELLANT, OXYGEN
March 2, 2020 - NPFC

Scope. This specification covers the requirements for three grades and two types of oxygen.

AIR825/9 - Demand Oxygen Systems
January 26, 2023 - SAE International

This SAE Aerospace Information Report (AIR) describes the general operating principles of demand oxygen equipment, including variant types such as diluter-demand and pressure breathing equipment. The sources of oxygen supply that can be used in connection with a demand oxygen...

AIR1392A - Oxygen System Maintenance Guide
August 23, 2023 - SAE International

This document is intended to give general instructions and directions for personnel performing maintenance and modification work on Oxygen Systems.

AS17852A - Reducers, Oxygen Pressure
January 26, 2023 - SAE International

This specification covers the requirements for two types of oxygen pressure reducers.

ASTM D888-18(2026) - Standard Test Methods for Dissolved Oxygen in Water
May 1, 2026 - ASTM International

4.1 Dissolved oxygen is required for the survival and growth of many aquatic organisms, including fish. The concentration of dissolved oxygen may also be associated with corrosivity and photosynthetic activity. The absence of oxygen may permit anaerobic decay of organic matter...

ASTM E2698-26 - Standard Practice for Radiographic Examination Using Digital Detector Arrays
February 1, 2026 - ASTM International

1.1 This practice covers the minimum requirements for radiographic examination of metallic and nonmetallic materials using digital detector arrays (DDAs). 1.2 The stated requirements of this specification are based on the use of an X-ray generating source. Additionally, some of the tests and...

AS8010D - Aviator's Breathing Oxygen Purity Standard
August 23, 2023 - SAE International

This document defines the minimum degree of purity and maximum levels of certain deleterious impurities allowable for aviator's breathing oxygen at the point of manufacture or generation. It covers gaseous, liquid, and chemically generated oxygen, and oxygen supplied by in situ...

BS 5343 - Specification. Gas detector tubes
February 27, 1976 - BSI

Accuracy requirements for detector tubes and their associated aspirating pumps, used for evaluating atmospheric hazards other than that of oxygen deficiency. Marking of tubes and points to cover in manufacturers' instructions.

AS8027 - Crew Member Oxygen Regulators, Demand
August 23, 2023 - SAE International

This SAE Aerospace Standard (AS) is intended to apply to those oxygen regulators which supply gaseous oxygen at breathing pressures to meet physiological requirements of aircraft flight crew members. It defines the minimum performance requirements and testing for aircraft demand type...

ASTM E144-14(2026) - Standard Practice for Safe Use of Oxygen Combustion Vessels
June 1, 2026 - ASTM International

This practice covers methods for judging the soundness of new and used oxygen combustion bombs, and describes the precautions to be observed in oxygen bomb combustion methods. This practice is applicable to all procedures in which samples are completely oxidized by combustion in a...

ASTM D6238-98(2024) - Standard Test Method for Total Oxygen Demand in Water
April 1, 2024 - ASTM International

5.1 The measurement of oxygen demand parameters is critical to the control of process wastewaters. Biochemical oxygen demand (BOD) and chemical oxygen demand (COD) analyzers have long time cycles and in the case of COD analyzers use corrosive reagents with the inherent problem...

AIR825/4A - Chemical Oxygen Systems
August 9, 2021 - SAE International

This SAE Aerospace Information Report (AIR) provides an orientation regarding the general technology of chemical oxygen generators to aircraft engineers for assistance in determining whether chemical oxygen generators are an appropriate oxygen supply source for hypoxia...

AS8025A - Passenger Oxygen Mask
August 11, 2021 - SAE International

This standard covers oronasal type masks which use a continuous flow oxygen supply. Each such mask comprises a facepiece with valves as required, a mask suspension device, a reservoir, or rebreather bag (when used), a length of tubing for connection to the oxygen supply source, and a...

AIR825/8 - Continuous Flow Oxygen Systems
January 26, 2023 - SAE International

This SAE Aerospace Information Report (AIR) provides general information on Continuous Flow Oxygen Systems which are available, principle functions of those systems and technical approaches to be taken into account during design and realization of systems. However, particular performance...

ASTM F3810-26b - Standard Specification for Oxygen Systems for Light Sport Aircraft
June 1, 2026 - ASTM International

1.1 This specification covers the requirement for installing oxygen systems in light sport aircraft. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate...

MIL-DTL-7891 - FILLER VALVE, AIRCRAFT OXYGEN
July 17, 2020 - NPFC

Scope. This specification covers low pressure and high pressure aircraft oxygen filler valves.

Advertisement