4.1 Addressing consensus standards with inter-laboratory studies (ILS) and methods specific to an organization. Test methods need to be validated in many cases, in order to be able to rely on the results. This has to be done at the organization performing the tests but is also performed in the...
5.1 Ladder designs can vary greatly in, for example: number and size of steps, geometry, and materials, and for a variety of industries. Fig. 2 shows examples of various ladders. 5.2.1 Example-A test requestor instructs that a lower-body exoskeleton is to be worn by five able-bodied users who are...
5.1 Inclined planes can vary greatly in, for example: slope, length, width, surface coatings and coverings, and handrails, and for a variety of industries. Fig. 1 shows images of example inclined planes. Example applications versus inclined planes are shown in Table 1. (e) Metal roof; (f) aircraft...
4.1 This classification was developed to permit the addition of descriptive symbols and values for further new formulations with improved properties without complete reorganization of the standard and to facilitate the incorporation of future new test methods to keep pace with changing...
5.1 Staircase designs can vary greatly in, for example: number of steps, staircase geometry, surface coatings and coverings, and railings, and for a variety of industries. Fig. 1 shows examples of various staircases. 5.2 Exoskeletons are being used in the industrial/occupatio
5.1 Dispersancy is the property that allows oil to suspend and carry away pollutants of diverse sources such as soot from combustion, metallic particles from wear, corrosion of mechanical parts, and insoluble products resulting from the aging of the oil. 5.2 When poured on a specific filter paper,...
5.1 This guide is intended for the identification and classification of copper-bearing scrap materials. Such identification and classification may include grading for commercial purposes, determining compliance (within the limits of the technology) with compositional specification requirements,...
This SAE Recommended Practice is intended as the definition of a standard test, which may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. The SAE No. 2 friction test is used to evaluate the friction...
This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document establishes performance requirements and guidelines for coating materials and plastic substrate testing.
1.1 This test method is used to measure skid resistance on a wide range of trafficked surfaces and for a wide variety of circumstances using a walking speed continuous friction-measuring equipment (CFME) fixed-slip measuring equipment. The fixed-slip ratio is typically 12 to 20?% but may vary...
This SAE Recommended Practice is intended as the definition of a standard test, which may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. This SAE No. 2 friction test monitors the μ-v curve for a...
This SAE Aerospace Recommended Practice (ARP) is intended to provide definitions of and recommendations for drawing limits pertaining to surface and edge features on machined metal fluid fittings and is subject to change to keep pace with experience and technical advances. The subject...
This SAE Recommended Practice is intended as the definition of a standard test, which may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. The specific purpose of this SAE Recommended Practice is to...
This SAE Recommended Practice defines requirements for equipment and supplies to be used in measuring shot peening arc height and other surface enhancement processes. It is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical...
This SAE Standard establishes the procedure for determining the operator duty cycle sound pressure level L odc to which operators of powered recreational craft up to 24 m in length are exposed during typical operation as determined by marine engine duty cycle studies. This document describes the...
This SAE Aerospace Recommended Practice (ARP) is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances.
4.1 Significance-This guide provides additional guidance to preparers of environmental disclosures; these materials are needed to address changing audience needs, the increased regulatory and accounting complexity around environmental matters, and the emergence of a variety of long-term trends and...
This Network Rail standard specifies: a) the PACE lifecycle and phases; b) PACE milestones; c) PACE Products; and d) Phase Readiness Reviews. This standard is part of the Capital Delivery Core Process and relates to NR/L1/INI/P3M/100. It applies to projects that require...
This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. It describes a body of tests which may be used as needed for abuse testing of electric or hybrid electric vehicle rechargeable energy...
This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document establishes additional performance requirements specifically for road illumination devices using light emitting diode...
Narrow Your Results