loading
ASTM PACKAGING - ASTM PACKAGING STANDARDS AND RELATED TECHNICAL MATERIAL
ASTM
A description is not available for this item.
SEMI PACKAGING - PACKAGING
SEMI
A description is not available for this item.
FORD PACKAGING GUIDELINES - PACKAGING GUIDELINES FOR PRODUCTION PARTS
July 1, 1997 - FORD
A description is not available for this item.
PIP ELSPS01 - Electrical Requirements for Packaged Equipment
August 1, 2017 - PIP

This Practice describes the electrical requirements for design, manufacture, inspection, testing, and shipping of packaged equipment (also referred to as skid mounted equipment). Electrical systems for packaged equipment can include components such as electrical...

PIP PCSPS001 - Packaged Equipment Instrumentation Specification
December 1, 2015 - PIP

This Practice describes the requirements and provides data sheets for the specification, procurement, fabrication, inspection, and testing of instrumentation, control and associated systems provided as applicable to "packaged equipment" as generally defined in Section 3 of this...

PIP PCSPS010 - Small, General Purpose Packaged Equipment Instrumentation Specification
August 1, 2017 - PIP

This Practice provides the minimum requirements for the performance, design, fabrication, testing, and inspection of instrumentation and control systems installed on small, general purpose packaged equipment units. This Practice is not intended for packaged analyzers systems or...

PIP RESE001 - General Purpose Skid-Mounted Packaged Equipment Specification
May 1, 2017 - PIP

This Practice provides the minimum requirements for mechanical design and manufacturing of skid-mounted packaged equipment. Skid-mounted units are self-contained units consisting of equipment, their auxiliary systems, interconnecting piping, electrical and instrument...

ASTM C1838-16(2026) - Standard Practice for Cleaning for 1S and 2S Bottles
June 1, 2026 - ASTM International

4.1 The uranium hexfluoride (UF6), as described in Specifications C787 and C996, has to meet different requirements: one set of requirements being safety, health physics, and criticality and the other set being chemical, physical, and isotopic. To ensure the UF6 is in compliance with all...

PIP PCDPS001 - Packaged Equipment Instrumentation Documentation Requirements Sheet and Instructions
January 1, 2018 - PIP

This Practice provides the purchaser with the method for preparing PIP PCDPS001-R, Packaged Equipment Instrumentation Documentation Requirements Sheet. Packaged equipment suppliers should also become familiar with the symbology used. This Practice contains key...

ASTM E3347/E3347M-26 - Standard Specification for Ballistic-Resistant Shields Used by Law Enforcement Officers
June 1, 2026 - ASTM International

1.1 This standard specifies minimum performance requirements and test methods for the ballistic resistance of shields used by U.S. law enforcement officers to protect against handgun and rifle ammunition. 1.1.1 The option for testing either handgun-rated or rifle-rated shields with a shotgun threat...

ASTM D7859-26 - Standard Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers
April 1, 2026 - ASTM International

1.1 This practice describes standardized procedures for the preparation, spraying, packaging, and shipping of fresh spray polyurethane foam (SPF) insulation product samples to be tested for their emissions of volatile organic compounds (VOCs) and semi-volatile organic compounds (SVOCs)....

ASTM F1140/F1140M-13(2025) - Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages
October 15, 2025 - ASTM International

1.1 These test methods explain the procedure for determining the ability of packages to withstand internal pressurization. 1.2 The burst test increasingly pressurizes the package until the package fails. 1.3 The creep test maintains a specified pressure for a specified time or...

ASTM F3201-26 - Standard Practice for Ensuring Dependability of Software Used in Unmanned Aircraft Systems (UAS)
May 1, 2026 - ASTM International

5.1 There is interest from industry and CAAs to create a means of compliance for software assurance for UAS, particularly in instances where conventional design assurance requirement management processes may over-prescribe requirements in relation to the level of risk of the UAS operation, or of...

ASTM F2193-26 - Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System
May 1, 2026 - ASTM International

These specifications and test methods provide standard specifications that specify material, labeling, and handling requirements for components used in surgical fixation of the spinal skeletal system such as metallic spinal screws, spinal plates, and spinal rods. The specifications and test methods...

ASTM D5185-26 - Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
March 1, 2026 - ASTM International

5.1 This test method covers the rapid determination of 22 elements in used and unused lubricating oils and base oils, and it provides rapid screening of used oils for indications of wear. Test times approximate a few minutes per test specimen, and detectability for most elements is in the low mg/kg...

AIR5742A - Packaging and Transportation of Oxygen Equipment
January 26, 2023 - SAE International

The scope of this document is related to the particular needs of oxygen equipment with regards to packaging and transportation. The document provides guidance for handling chemical, gaseous and liquid oxygen equipment. It summarizes national and international regulations to be...

ASTM F1886/F1886M-25 - Standard Test Method for Determining Integrity of Primary Packaging by Visual Inspection
October 15, 2025 - ASTM International

6.1 Seal and material surface integrity attributes may be linked to a number of variables in process parameters, equipment, or material, as well as environmental (room temperature and relative humidity). Visual characteristics of suspect integrity defects in primary packaging,...

ASTM F3263-17(2025) - Standard Guide for Packaging Test Method Validation
October 1, 2025 - ASTM International

1.1 This guide provides information to clarify the process of validating packaging test methods specific for an organization utilizing them as well as through inter-laboratory studies (ILS), addressing consensus standards with inter-laboratory studies (ILS) and methods specific to an...

ASTM C1696-26 - Standard Guide for Industrial Thermal Insulation Systems
March 1, 2026 - ASTM International

1.1 This guide covers information on selection of insulation materials, systems design, application methods, protective coverings, guarantees, inspection, testing, and maintenance of thermal insulation primarily for industrial applications in a temperature range of -320 to 1200°F (-195.5 to 648...

ASTM E2458-26 - Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents and Toxins from Nonporous Surfaces
January 15, 2026 - ASTM International

1.1 These practices cover the collection of visible powders that are suspected biological agents and toxins from solid nonporous surfaces using a bulk collection method, using a dry swab and laminated card, followed by a swab sampling method using a sterile moistened swab. Bulk powder samples are...

Advertisement