loading
AAMI QUALITY SYSTEM - THE QUALITY SYSTEM COMPENDIUM: REQ & INDUSTRY PRACTICE
AAMI
A description is not available for this item.
ASTM PACKAGING - ASTM PACKAGING STANDARDS AND RELATED TECHNICAL MATERIAL
ASTM
A description is not available for this item.
SEMI PACKAGING - PACKAGING
SEMI
A description is not available for this item.
PCMCIA SYSTEM - PCMCIA SYSTEM ARCHITECTURE
PCMCIA
A description is not available for this item.
AWI QUALITY STANDARDS - ARCHITECTURAL WOODWORK QUALITY STANDARDS ILLISTRATED
AWI
A description is not available for this item.
FORD PACKAGING GUIDELINES - PACKAGING GUIDELINES FOR PRODUCTION PARTS
July 1, 1997 - FORD
A description is not available for this item.
AAMI QUALITY SYSTEM CD - QUALITY SYSTEM COLLECTION CD
AAMI
A description is not available for this item.
ASHRAE SYSTEMS & EQUIP SI - 2020 ASHRAE Handbook HVAC Systems and Equipment SI Edition
January 1, 2020 - ASHRAE
A description is not available for this item.
ASHRAE SYSTEMS & EQUIP IP - 2020 ASHRAE Handbook HVAC Systems and Equipment I-P Edition
January 1, 2020 - ASHRAE
A description is not available for this item.
ISO QUALITY ASSURANCE - QUALITY ASSURANCE FOR ANALYTICAL LABORATORIES
ISO
A description is not available for this item.
QUALITY PLANNING - QUALITY PLANNING AND ANALYSIS
ASQ
A description is not available for this item.
QUALITY RELIABILITY - QUALITY, RELIABILITY & PROCESS IMPROVEMENT
IP
A description is not available for this item.
ASTM D4739-26 - Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
May 15, 2026 - ASTM International

5.1 New and used petroleum products can contain basic constituents that are present as additives. The relative amount of these materials can be determined by titration with acids. The base number is a measure of the amount of basic substances in the oil always under the conditions of the test. It...

ASTM D7826-26 - Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
May 1, 2026 - ASTM International

1.1 This guide provides procedures to develop data for use in research reports for new aviation gasolines or new aviation gasoline additives. 1.2 This data is intended to be used by the ASTM subcommittee to make a determination of the suitability of the fuel for use as an aviation fuel in either a...

ASTM D2838-18(2026) - Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
April 1, 2026 - ASTM International

5.1 As a result of the manufacturing process, internal stresses are locked into the film and these can be released by heating. Note 3: For any given type of film or sheeting, the temperatures at which shrinkage will begin are related to processing techniques employed to manufacture the film and...

Advertisement