loading
ASTM F3803-26 - Standard Guide for Applying Goods Movement Process Codes in Common Approaches to Transport Management
January 1, 2026 - ASTM International

5.1 This section elaborates how the GMPC may be used in the context of the two main approaches to managing the execution of transportation mentioned in 4.8. These elaborations do not go into every possible detail of these approaches. The purpose of the elaborations is to provide an outline of the...

ASTM D5414-95(2025) - Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
August 1, 2025 - ASTM International

5.1 This test method is intended to be used mainly as a means of comparing the performance of unitizing films. It can also be used to compare the effectiveness of different wrap cycles with the same wrapping materials. No direct correlation between these tests results and actual field performance...

ASTM D5416-95(2025) - Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing
August 1, 2025 - ASTM International

4.1 This test method is intended to provide only a comparative procedure for evaluating unknown films against a standard or control film whose performance has been defined as adequate in actual field conditions. 4.2 This test method leaves open to the discretion of the user several key factors,...

ASTM D4649-20(2025) - Standard Guide for Use of Stretch Films and Wrapping Application
August 1, 2025 - ASTM International

1.1 This guide covers recommended guidelines for the selection, specification, and use of stretch films for unitizing, reinforcing, and palletizing for indoor environments. This can include storage or transport, or both, in warehouses, closed containers such as truck trailers or rail...

ASTM D6179-20(2025) - Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates
August 1, 2025 - ASTM International

1.1 These test methods cover testing the integrity of unitized loads and large shipping cases and crates as well as the ability of the contents to endure rough handling. Not all of the test methods are applicable to all products, containers, and loads. These test methods are applicable to common...

ASTM D1185-98a(2025) - Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
January 1, 2025 - ASTM International

4.1 Static compression and bending tests provide data that are used to estimate stiffness, strength, and safe working loads for pallets under specified load and support conditions. These estimates provide a basis for designing pallets and comparing the performance between...

ASTM D3043-17(2025) - Standard Test Methods for Structural Panels in Flexure
March 15, 2025 - ASTM International

3.1 These methods give the flexural properties, principally strength and stiffness, of structural panels. These properties are of primary importance in most structural uses of panels whether in construction for floors, wall sheathing, roof decking, concrete form, or various space plane structures;...

ASTM D6199-18a(2024)e1 - Standard Practice for Quality of Wood Members of Containers and Pallets
October 1, 2024 - ASTM International

4.1 Each wood member contains a combination of characteristics which affects the performance of the container or pallet in which it is used. The requirements for classes, herein specified, have been established as these characteristics are related to the functional application of members in...

AS1988B - Air Cargo Pallet Extensions
October 6, 2023 - SAE International

This SAE Aerospace Standard (AS) establishes the dimensional and operational requirements for pallet extension devices. It provides support for items of cargo beyond either the short or the long sides of a pallet, allowing increased volume to be achieved in conjunction with...

ASTM D4801-08(2025) - Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater
January 1, 2025 - ASTM International

This specification covers the requirements for extruded (cast or blown) and compression-molded sheeting made from low-, medium-, and high-density polyethylenes and copolymers in specified thicknesses. Depending on the functional requirements, sheeting conforming to this specification is used in...

ASTM D4003-98(2024) - Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
October 1, 2024 - ASTM International

1.1 These test methods are intended to determine the ability of a package or product to withstand laboratory simulated horizontal impact forces. 1.2 The horizontal impacts used in these test methods are programmed shock inputs that represent the hazards as they occur in the shipping and handling...

ASTM D5888-19(2024) - Standard Guide for Storage and Handling of Geosynthetic Clay Liners
June 1, 2024 - ASTM International

4.1 For optimum performance, GCLs must be stored and handled prior to their installation in a manner that does not impact their hydraulic or physical properties, or both. Adherence to these storage and handling guidelines will help to ensure that acceptable GCL performance will be achieved. FIG. 1...

AS1492C - Interline Air Cargo Pallet Nets
January 13, 2023 - SAE International

This document establishes dimensional, structural, and environmental requirements for Type II/2 interline pallet nets. Type II/2 covers NAS3610/AS36100 code sizes.

ASTM D999-08(2023) - Standard Test Methods for Vibration Testing of Shipping Containers
December 1, 2023 - ASTM International

1.1 These test methods cover vibration tests of filled shipping containers. Such tests may be used to assess the performance of a container, with its interior packing and means of closure, both in terms of its strength and of the protection it provides its contents when it is subjected to vibration...

ASTM D4577-19(2023) - Standard Test Method for Compression Resistance of a Container Under Constant Load
October 1, 2023 - ASTM International

1.1 This test method is designed to determine the resistance of a shipping container to a vertically applied constant load for either a specified time or to failure. The test method may also be used for palletized or unitized load configurations. 1.2 This standard does not purport to address...

ASTM D3950-23 - Standard Specification for Strapping, Nonmetallic (and Joining Methods)
July 1, 2023 - ASTM International

1.1 This specification covers nonmetallic strapping and joining methods intended for use in closing, reinforcing, and bundling articles for shipment, unitizing, palletizing, and bracing for car loading and truck loading. 1.2 The values stated in inch-pound units are to be regarded as...

ASTM C331/C331M-23 - Standard Specification for Lightweight Aggregates for Concrete Masonry Units
June 1, 2023 - ASTM International

This specification covers lightweight aggregates intended for use in concrete masonry units when a prime consideration is to reduce the density of the units. Three general types of lightweight aggregates are covered by this specification: aggregates prepared by expanding, palletizing, or...

AS1491B - Interline Air Cargo Pallets
January 13, 2023 - SAE International

This SAE Aerospace Standard specifies the dimensional, design criteria, fabrication, performance, operational, environmental, and testing requirements for interline pallets requiring airworthiness approval for loading onto civil transport aircraft equipped with NAS3610/AS36100 restraint...

ASTM D5277-22 - Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
October 15, 2022 - ASTM International

4.1 This test method is for use in evaluating the capability of a container or shipping system to withstand sudden shocks and crushing forces, such as those generated from rail switching impacts or pallet marshalling, or to evaluate the capability of a container and its inner packing, or...

ASTM F3588-22 - Standard Guide for Set of Objects used with A-UGVs
October 1, 2022 - ASTM International

4.1 A-UGVs navigate, dock, or perform other tasks, or combinations thereof, within for example manufacturing, warehouse, hospital, and other environments. Objects (defined in Terminology F3200 as anything in the environment that is not infrastructure) and obstacles (defined in Terminology F3200 as...

Advertisement