1.1 This practice covers the procedure for preparing laboratory prints of paste printing inks using a motor-driven printability tester. 1.2 This practice covers printability testers of four different designs, referred to as Tester A, B, C, and D. These testers feature "push-button" control of...
1.1 This practice covers the evaluation of the relative resistance of printed matter to liquid chemicals, as evidenced by lack of discoloration, bleeding, or loss of gloss. 1.2 This practice utilizes a sandwich procedure similar in principle to ISO/TC 130 N 589. Spotting or immersion procedures are...
1.1 This practice covers the procedure for preparing laboratory prints of paste inks using a printing gage in conjunction with a flat-bed proof press. 1.2 This practice is applicable to the preparation of solid-area prints by direct letterpress or by dry offset on a flat substrate such as paper,...
1.1 This standard describes procedures for the determination of the relative lightfastness and weatherability of printed matter under the following conditions, which involve exposure to natural daylight or accelerated procedures in the laboratory: 1.1.1 Method 1-Daylight behind window glass, 1.1.2...
1.1 This test method covers the determination of the mass per unit area and density of aramid paper and paperboard. 1.2 Mass per unit area is expressed in grams per square meter (g/m2) or ounces per square yard (oz/yd2). Density is expressed in grams per cubic centimeter (g/cm3 ) or (ounces...
This guide covers the standard for the calculation and the substantiation of recycled content of packaging papers and paperboard products. The mass balance approach shall be used to determine absolute recycled content. This guide also covers the recycled content that contain any amount or...
This specification covers the composition and physical requirements of chemically treated, recycled cellulosic fiber loose-fill type thermal insulation for installation in attics or enclosed spaces in housing and other buildings by pneumatic or pouring method. While the products are used in various...
1.1 This specification2 covers two kinds of rolls used in machinery for producing corrugated paperboard. Rolls are fabricated of forged bodies and trunnions. The trunnions may be bolted or shrink assembled on one or both ends of the body. A seal weld may be made at the body/trunnion...
This specification covers the composition and physical properties of spray-applied cellulosic fiber stabilized thermal insulation applied to open or closed ceiling spaces, regardless of slope. The basic material shall be recycled cellulosic fiber made from selected paper or paperboard stock....
This specification covers the composition and physical requirements of chemically treated, recycled cellulosic fiber loose-fill type thermal insulation for installation in attics or enclosed spaces in housing and other buildings by pneumatic or pouring method. While the products are used in various...
1.1 This test method covers the determination of nitrogenous organic materials in paper and paperboard, which typically are used to reduce the thermal degradation of the cellulose in the paper and paperboard. 1.2 The nitrogen determination by this method does not include the nitrogen...
1.1 These test methods cover procedures for sampling and testing untreated paper to be used as an electrical insulator or as a constituent of a composite material used for electrical insulating purposes. 1.1.1 Untreated papers are thin, fibrous sheets normally laid down from a water suspension of...
1.1 This test method covers procedures for determining tensile properties of paper and paperboard. 1.2 The procedures given in this test method are for use with constant-rate-of-elo
1.1 This specification covers electrical grade unsized, unbleached sulfate paper and paperboard for use as layer insulation in coils, transformers, and similar apparatus. Other applications include, but are not limited to, turn insulation, slot liners, wedges, phase insulation, and separator...
1.1 This specification covers cellulosic-fiber-bas
1.1 This practice defines the standard atmospheres for normal preconditioning, conditioning, and testing of paper and paper products, paperboard, fiberboard, and containers made from them. It also specifies procedures for handling these materials in order that they may reach equilibrium with...
4.1 Many of the functional properties of wax-treated corrugated paperboard and cartons are dependent on the amount of wax present. 4.2 In the case of wax-saturated, or wax-impregnated, paperboard the principal concern is with the weight of wax used relative to the weight of...
1.1 This practice is no longer being updated but is being retained for historical value due to the procedures herein that are unique to the AE community. 1.2 This practice provides guidelines for carrying out acoustic emission (AE) examinations of Yankee and Steam Heated Paper Dryers (SHPD) of the...
This guide covers the standard for the calculation and the substantiation of recycled content of packaging papers and paperboard products. The mass balance approach shall be used to determine absolute recycled content. This guide also covers the recycled content that contain any amount or...
This specification covers the composition and physical requirements of chemically treated, recycled cellulosic fiber loose-fill type thermal insulation for installation in attics or enclosed spaces in housing and other buildings by pneumatic or pouring method. While the products are used in various...
Narrow Your Results