loading
ASTM D6786-08 - Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
January 1, 2008 - ASTM International

Particles in insulating oil can have a detrimental effect on the dielectric properties of the fluid, depending on the size, concentration, and nature of the particles. The source of these particles can be external contaminants, oil degradation by-products, or internal materials...

ASTM D6786-07 - Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
December 1, 2007 - ASTM International

Particles in insulating oil can have a detrimental effect on the dielectric properties of the fluid, depending on the size, concentration, and nature of the particles. The source of these particles can be external contaminants, oil degradation by-products, or internal materials...

ASTM D6786-02 - Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
April 10, 2002 - ASTM International

Particles in insulating oil can have a detrimental effect on the dielectric properties of the fluid, depending on the size, concentration, and nature of the particles. The source of these particles can be external contaminants, oil degradation by-products, or internal materials...

ASTM D7619-22 - Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
April 1, 2022 - ASTM International

1.1 This test method uses a specific automatic particle counter2 (APC) to count and measure the size of dispersed dirt particles, water droplets and other particles, in light and middle distillate fuel, and bio fuels such as biodiesel and biodiesel blends, in the overall range...

ASTM D7619 - Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
July 1, 2017 - ASTM

This test method uses a specific automatic particle counter2 (APC) to count and measure the size of dispersed dirt particles, water droplets and other particles, in light and middle distillate fuel, and bio fuels such as biodiesel and biodiesel blends, in the overall range from...

ASTM D7619-17 - Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
July 1, 2017 - ASTM International

1.1 This test method uses a specific automatic particle counter2 (APC) to count and measure the size of dispersed dirt particles, water droplets and other particles, in light and middle distillate fuel, and bio fuels such as biodiesel and biodiesel blends, in the overall range...

ASTM D7619-12b - Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
December 1, 2012 - ASTM International

1.1 This test method uses a specific automatic particle counter2 (APC) to count and measure the size of dispersed dirt particles, water droplets and other particles, in light and middle distillate fuel, and bio fuels such as biodiesel and biodiesel blends, in the overall range...

ASTM F661 - Standard Practice for Particle Count and Size Distribution Measurement in Batch Samples for Filter Evaluation Using an Optical Particle Counter
January 1, 1992 - ASTM

1. Scope 1.1 This practice covers procedures for determination of particle concentration and particle size distribution in batch samples from filter influent and effluent liquid streams. Challenge materials may be suspensions of standard test dusts or of monosize particles. 1.2...

ASTM F322-80 - Method for Determining the Quality of Calibration Particles for Automatic Particle Counters (Withdrawn 1990)
January 1, 1980 - ASTM International
A description is not available for this item.
ASTM F650-80 - Practice for Determining Relative Bias of Two Particle Counters Using Comparison Procedures (Withdrawn 1990)
January 1, 1980 - ASTM International
A description is not available for this item.
Advertisement