1.1 This practice covers the calibration and verification of Dynamic Imaging Analyzers (analyzers) using catalytic and non-catalytic reference materials. The measurement range of analyzers covers from 500?μm to 20?000?μm. 1.2 This practice may also be used to analyze catalytic...
7.1 The particle size distribution of powdered ion exchange resins and, more importantly, the derived parameters of mean particle size and percent above and below specified size limits are useful for determining batch to batch variations and, in some cases, can be...
1.1 This test method covers the measurement of particle size and shape using dynamic imaging analyzers (analyzers) for catalytic materials, in particular, catalyst carriers. The measurement range of analyzers covers from 500?μm to 20?000?μm. 1.2 Units-The values...
1.1 This test method covers the use of a direct imaging analyzer to count and measure the size of dispersed solid particles per milliliter in light and middle distillate fuels in the size bands of =4?μm, =6?μm, and =14?μm. 1.2 The values stated in SI units are to be...
1.1 This test method describes the procedures for performing a sieve analysis to determine the particle size distribution of granular infill materials used in artificial turf surface systems. Examples of materials suitable for testing under this method include, but may not be limited...
1.1 This guide provides information for determining particle size and shape using Dynamic Imaging Analyzers (DIA) in multiple application points including in-line, at-line and stand alone, lab based or portable, configurations. This guide focuses on concepts and strategies for...
1.1 This test method covers the determination of microplastic particle size distribution, shape characterization, and number concentration (particle counts) in sample extracts containing particles between 5?μm and 100?μm. Light is transmitted through a flow cell...
1.1 This test method covers the determination of microplastic particle size distribution, shape characterization, and number concentration (particle counts) in sample extracts containing particles between 5?μm and 100?μm. Light is transmitted through a flow cell...
1.1 This test method, one of several found valuable for the measurement of particle size, covers the determination of the particle size distribution of alumina or quartz powders (0.6?μm to 56.0 μm) using electrical sensing zone particle size...
1.1 This practice covers the calibration and verification of Dynamic Imaging Analyzers (analyzers) using catalytic and non-catalytic reference materials. The measurement range of analyzers covers from 500?μm to 20?000?μm. 1.2 This practice may also be used to analyze catalytic...
1.1 This practice describes procedural steps to create a correlation that can be used to compare results of proppant size distributions between dynamic imaging analyzers (analyzers) and prescribed sieve sets. 1.2 The proppant size and distribution specifications that are...
1.1 This test method covers the determination of total nitrogen (TN) and total dissolved nitrogen (TDN) in surface water, seawater, groundwater, wastewater, and wastewater effluents in the range from 0.2?mg/L N to 10?mg/L N. Concentrations from 10?mg/L to 500?mg/L are possible when used in...
Narrow Your Results