1.1 This specification covers the passivation of stainless-steel alloys in the 200 (UNS2XXXX), 300 (UNS3XXXX), and 400 (UNS4XXXX) series, and the precipitation-harden
4.1 The uranium hexfluoride (UF6), as described in Specifications C787 and C996, has to meet different requirements: one set of requirements being safety, health physics, and criticality and the other set being chemical, physical, and isotopic. To ensure the UF6 is in compliance with all...
3.1 Water-blast cleaning with (SSPC-TR2/NACE 6G 198; SSPC-SP 5 (WAB)/NACE WAB-1; SSPC-SP 10 (WAB)/NACE WAB-2; SSPC-SP 6 (WAB)/NACE WAB-3; SSPC-SP 14 (WAB)/NACE WAB-8); SSPC-SP 7 (WAB)/NACE WAB-4 or without, (SSPC-SP WJ-1/NACE WJ-1; SSPC-SP WJ-2/NACE WJ-2; SSPC-SP WJ-3/NACE WJ-3; SSPC-SP WJ-4/NACE...
4.1 The ENDF/B library in the United States and similar libraries elsewhere, such as JEFF (21), JENDL (22), and BROND (24), provide a compilation of neutron cross section and other nuclear data for use by the nuclear community. The availability of these excellent evaluations makes possible a...
3.1 The objective of surface treatments as documented in this practice is to improve the corrosion resistance of metallic surgical implants including, but not limited to, those manufactured from iron, cobalt, nickel, titanium, and tantalum base materials. 3.2 Iron particles, ceramic media, and...
4.1 The bi-directional axial compressive load test provides separate, direct measurements of the axial capacity mobilized above an embedded jack assembly and element end bearing plus any axial capacity mobilized below the jack assembly. The maximum mobilized axial capacity equals two times the...
5.1 Need for Heat Flux Measurements: 5.1.1 Independent measurements of temperature and heat flux support the development and validation of engineering models of fires and other high environments, such as furnaces. For tests of fire protection materials and structural assemblies, temperature and...
5.1 FTOHs are volatile and semivolatile precursors to perfluorinated carboxylic acids and are used in the synthesis of various surfactants and as intermediates in the manufacturing of a variety of consumer products including polymers, paints, adhesives, aqueous film-forming foam, waxes, and...
4.1 These test methods describe laboratory tests for comparing the resistance of stainless steels and related alloys to the initiation of pitting and crevice corrosion. The results may be used for ranking alloys in order of increasing resistance to pitting and crevice corrosion initiation under the...
1.1 This guide is intended to be used by facility owners, military commanders, security personnel, planners, specifiers, designers, and engineers in the selection and application of vehicle security barrier systems for entry control facilities (ECFs), access control points (ACPs), or other...
1.1 Purpose: 1.1.1 The purpose of this test method is to quantitatively assess how much a back exoskeleton affects low back loading (musculoskeletal forces in the lumbar region of the back) and low back disorder (LBD) risk. LBDs refer to a broad range of medical conditions, injuries, or issues of...
1.1 This specification covers several different types of chemical passivation treatments for stainless steel parts. It includes recommendations and precautions for descaling, cleaning, and passivation of stainless steel parts. It includes several alternative tests, with acceptance...
5.1 General-This procedure is used for evaluation of the structural integrity of atmospheric storage tanks. The AE method can detect flaws which are in locations that are stressed during pressurization. Such locations include the tank wall, welds attaching pads to the tank, nozzle attachments, and...
4.1 This guide is intended for use by those undertaking the development of fire hazard assessments for upholstered seating furniture in health care occupancies. 4.2 As a guide this document provides information on an approach to development of a fire hazard assessment, but fixed procedures are not...
5.1 Poor indoor air quality has been implicated in significant adverse acute and chronic impacts on occupant health and performance. The ability to assess the various factors contributing to poor indoor air quality is critical for improving indoor air quality. 5.2 Indoor CO2 concentrations have...
1.1 This practice describes a passive method for detecting and locating the steady state source of gas and liquid leaking out of a pressurized system. The method employs surface-mounted acoustic emission sensors (for non-contact sensors see Practice E1002), or sensors attached to the system...
5.1 This practice may be used to determine the effectiveness of continuous active/passive vapor delivery products to inhibit the growth of organisms in areas containing a high level of humidity and a high ambient air temperature. 5.2 The number of lots of test substance and the number of...
4.1 Purpose-This guide provides a screening risk assessment process for evaluating site use activities at four types of inactive and unregulated solid waste disposal sites and chemically impacted sites. The site use activities include: (1) Active Recreation; and (2) Passive Recreation....
1.1 This test method covers the determination of the electrical performance of photovoltaic concentrator modules and systems under natural sunlight using a normal incidence pyrheliometer. 1.2 The test method is limited to module assemblies and systems where the geometric concentration ratio...
This specification covers requirements for ferrous and nonferrous inch balls. The balls are intended for use in bearings, bearing applications, check valves, and other components using balls. These balls are classified into fourteen kinds according to their chemical composition: Composition 1...
Narrow Your Results