loading
ASTM E2582-21(2025) - Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications
September 1, 2025 - ASTM International

1.1 This practice describes a procedure for detecting subsurface flaws in composite panels and repair patches using flash thermography (FT), in which an infrared (IR) camera is used to detect anomalous cooling behavior of a sample surface after it has been heated with a spatially...

MIL-C-28807 - CONVERTER PATCH PANEL, CV-3022/UG
NPFC
A description is not available for this item.
MIL-I-24728/6 - INTERCONNECTION BOX, FIBER OPTIC, CONNECTOR PATCH PANEL MODULE
NPFC
A description is not available for this item.
ASTM D3043-17(2025) - Standard Test Methods for Structural Panels in Flexure
March 15, 2025 - ASTM International

1.1 These test methods determine the flexural properties of strips cut from structural panels or panels up to 4?ft by 8 ft in size. Structural panels in use include plywood, waferboard, oriented strand board, and composites of veneer and of wood-based layers. Four methods of...

ASTM D5641/D5641M-25 - Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber
March 1, 2025 - ASTM International

5.1 This practice is a nondestructive evaluation intended to be used for quality control purposes during factory or field seaming of geomembranes. 5.2 This practice may also be used to evaluate geomembrane panels for holes that penetrate the entire thickness of material. Limitations on the...

AES45 - AES Standard for Single-Programme Connectors - Connectors for Loudspeaker-Level Patch Panels
January 1, 2001 - AES
A description is not available for this item.
ASTM E2582 - Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications
February 1, 2021 - ASTM

This practice describes a procedure for detecting subsurface flaws in composite panels and repair patches using Flash Thermography (FT), in which an infrared (IR) camera is used to detect anomalous cooling behavior of a sample surface after it has been heated with a spatially uniform...

ASTM E2582-21 - Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications
February 1, 2021 - ASTM International

1.1 This practice describes a procedure for detecting subsurface flaws in composite panels and repair patches using Flash Thermography (FT), in which an infrared (IR) camera is used to detect anomalous cooling behavior of a sample surface after it has been heated with a spatially...

ASTM D5641/D5641M-16(2024) - Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber
November 1, 2024 - ASTM International

5.1 This practice is a nondestructive evaluation intended to be used for quality control purposes during factory or field seaming of geomembranes. 5.2 This practice may also be used to evaluate geomembrane panels for holes that penetrate the entire thickness of material. Limitations on the...

ASTM F2873-24 - Standard Practice for the Installation of Self-Leveling Underlayment and the Preparation of Surface to Receive Resilient Flooring
November 1, 2024 - ASTM International

1.1 This practice covers the installation of self-leveling underlayments, which may include a priming system, over solid wood, wood structural panel subfloors, over concrete, and over certain solidly bonded existing flooring systems such as epoxy floors, ceramic and natural stone tiles,...

ASTM E2582-19 - Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications
July 1, 2019 - ASTM International

1.1 This practice describes a procedure for detecting subsurface flaws in composite panels and repair patches using Flash Thermography (FT), in which an infrared (IR) camera is used to detect anomalous cooling behavior of a sample surface after it has been heated with a spatially...

GMW15286 - Flexible Reinforcement Patch
December 1, 2019 - GMW

This Material Specification is intended to detail the physical properties, and performance requirements of a Flexible Reinforcement Patch which is applied in the body shop. The patch material is applied to "oily" metal body panels. It is cured in the heat of the Electro...

ASTM F2678-16(2021) - Standard Practice for Preparing Panel Underlayments, Thick Poured Gypsum Concrete Underlayments, Thick Poured Lightweight Cellular Concrete Underlayments, and Concrete Subfloors with Underlayment Patching Compounds to Receive Resilient Flooring
October 1, 2021 - ASTM International

4.1 This practice provides minimum recommendations for preparing and smoothing panel underlayments, thick poured gypsum concrete underlayments, thick poured lightweight cellular concrete underlayments and concrete subfloors with patching compounds. Actual requirements for materials to...

ASTM D6355-07(2022) - Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves
June 1, 2022 - ASTM International

4.1 This RIPT method assesses the potential of skin sensitization with a particular medical product by repeated topical applications to the skin of selected subjects. This is a procedure that has the potential to detect many, but not all, sensitzers. This requires multiple applications to induce a...

SEMI FLAT PANEL DISPLAY - FLAT PANEL DISPLAY
SEMI
A description is not available for this item.
MIL-P-23468 - PANEL,PATCHING,COMMUNICATION,SB-1203/UG
NPFC
A description is not available for this item.
ASTM E2582-07(2014) - Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications
October 1, 2014 - ASTM International

1.1 This practice describes a procedure for detecting subsurface flaws in composite panels and repair patches using Flash Thermography (FT), in which an infrared (IR) camera is used to detect anomalous cooling behavior of a sample surface after it has been heated with a spatially...

MIL-P-49025 - PANEL, PATCHING, COMMUNICATION TT-23F/SG PKG. OF
NPFC
A description is not available for this item.
ASTM F2873 - Standard Practice for the Installation of Self-Leveling Underlayment and the Preparation of Surface to Receive Resilient Flooring
May 1, 2020 - ASTM

This practice covers the installation of self-leveling underlayments, which may include a priming system, over solid wood, wood structural panel subfloors, over concrete, and over certain solidly bonded existing flooring systems such as epoxy floors, ceramic and natural stone tiles,...

Advertisement