loading
ASTM C936/C936M-26 - Standard Specification for Solid Concrete Interlocking Paving Units
June 1, 2026 - ASTM International

This specification is intended for interlocking concrete pavers used in the construction of paved surfaces and manufactured from cementitious materials, aggregates, chemical admixtures, and other constituents such as integral water repellents. The specification also offers guidelines for...

ASTM C1262/C1262M-26 - Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
June 1, 2026 - ASTM International

1.1 This test method covers the resistance to freezing and thawing of dry-cast segmental retaining wall (SRW) units (see Specification C1372) and related concrete units. Units are tested in a test solution that is either potable tap water or 3 % saline solution depending on the intended use of the...

ASTM D8518-25 - Standard Guide for Application of Hot-Applied Rubberized Asphalt Roofing and Waterproofing
December 1, 2025 - ASTM International

4.1 Establishing standard practices and recommended procedures is a critical step required to achieve quality roofing and waterproofing system installations. This guide describes preparing typical substrates to receive hot-applied rubberized asphalt (HRA), melting and application of HRA, typical...

ASTM C1884-25 - Standard Specification for Dry-Cast Manufactured Concrete Ballast Units
July 1, 2025 - ASTM International

1.1 This specification covers dry-cast, manufactured concrete units that are primarily used for ballast applications. These units are machine-made from hydraulic cement, water, and suitable mineral aggregates with or without the inclusion of other materials. Note 1: The design of concrete ballast...

ASTM C936/C936M-24 - Standard Specification for Solid Concrete Interlocking Paving Units
June 15, 2024 - ASTM International

This specification is intended for interlocking concrete pavers used in the construction of paved surfaces and manufactured from cementitious materials, aggregates, chemical admixtures, and other constituents such as integral water repellents. The specification also offers guidelines for...

ASTM F2913-24 - Standard Test Method for Measuring the Coefficient of Friction for Evaluation of Slip Performance of Footwear and Test Surfaces/Flooring Using a Whole Shoe Tester
June 15, 2024 - ASTM International

1.1 This test method2 determines the dynamic coefficient of friction between footwear and floorings under reproducible laboratory conditions for evaluating relative slip performance. The method is applicable to all types of footwear, outsole units, heel top lifts and sheet soling materials, also to...

ASTM C1884-24 - Standard Specification for Manufactured Concrete Ballast Units
June 15, 2024 - ASTM International

1.1 This specification covers dry-cast, manufactured concrete units that are primarily used for ballast applications. These units are machine-made from hydraulic cement, water, and suitable mineral aggregates with or without the inclusion of other materials. Note 1: The design of concrete ballast...

ASTM C1262/C1262M-24 - Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
June 1, 2024 - ASTM International

1.1 This test method covers the resistance to freezing and thawing of dry-cast segmental retaining wall (SRW) units (see Specification C1372) and related concrete units. Units are tested in a test solution that is either potable tap water or 3 % saline solution depending on the intended use of the...

ASTM C936/C936M-23a - Standard Specification for Solid Concrete Interlocking Paving Units
December 1, 2023 - ASTM International

This specification is intended for interlocking concrete pavers used in the construction of paved surfaces and manufactured from cementitious materials, aggregates, chemical admixtures, and other constituents such as integral water repellents. The specification also offers guidelines for...

ASTM C140/C140M-23a - Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
December 1, 2023 - ASTM International

1.1 These test methods provide various testing procedures commonly used for evaluating characteristics of concrete masonry units and related concrete units. Methods are provided for sampling, measurement of dimensions, compressive strength, absorption, unit weight (density), moisture content,...

ASTM C1884-23a - Standard Specification for Manufactured Concrete Ballast Units
December 1, 2023 - ASTM International

1.1 This specification covers dry-cast, manufactured concrete units that are primarily used for ballast applications. These units are machine-made from hydraulic cement, water, and suitable mineral aggregates with or without the inclusion of other materials. Note 1: The design of concrete ballast...

ASTM C936/C936M-23 - Standard Specification for Solid Concrete Interlocking Paving Units
June 15, 2023 - ASTM International

This specification is intended for interlocking concrete pavers used in the construction of paved surfaces and manufactured from cementitious materials, aggregates, chemical admixtures, and other constituents such as integral water repellents. The specification also offers guidelines for...

ASTM C140/C140M-23 - Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
June 1, 2023 - ASTM International

1.1 These test methods provide various testing procedures commonly used for evaluating characteristics of concrete masonry units and related concrete units. Methods are provided for sampling, measurement of dimensions, compressive strength, absorption, unit weight (density), moisture content,...

ASTM C1884-23 - Standard Specification for Manufactured Concrete Ballast Units
June 1, 2023 - ASTM International

1.1 This specification covers dry-cast, manufactured concrete units that are primarily used for ballast applications. These units are machine-made from hydraulic cement, water, and suitable mineral aggregates with or without the inclusion of other materials. Note 1: The design of concrete ballast...

ASTM E950/E950M-22 - Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces
November 1, 2022 - ASTM International

5.1 For inertial profiler technology, measuring vehicular traveled surfaces using an instrumented vehicle with a fluctuating inertial reference elevation provides a satisfactory method for acquiring profile elevation measurements (1). 5.2 The profile data can be processed to produce, by simulation,...

ASTM C140/C140M-22c - Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
December 1, 2022 - ASTM International

1.1 These test methods provide various testing procedures commonly used for evaluating characteristics of concrete masonry units and related concrete units. Methods are provided for sampling, measurement of dimensions, compressive strength, absorption, unit weight (density), moisture content,...

ASTM E1486-14(2022) - Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
October 1, 2022 - ASTM International

1.1 This test method covers data collection and analysis procedures to determine surface flatness and levelness by calculating waviness indices for survey lines and surfaces, elevation differences of defined wheel paths, and levelness indices using the inch-pound system of units. Note 1: This test...

ASTM E1486M-14(2022) - Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric)
October 1, 2022 - ASTM International

1.1 This test method covers data collection and analysis procedures to determine surface flatness and levelness by calculating waviness indices for survey lines and surfaces, elevation differences of defined wheel paths, and levelness indices using SI units. Note 1: This test method is the...

ASTM C140/C140M-22b - Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
July 1, 2022 - ASTM International

1.1 These test methods provide various testing procedures commonly used for evaluating characteristics of concrete masonry units and related concrete units. Methods are provided for sampling, measurement of dimensions, compressive strength, absorption, unit weight (density), moisture content,...

ASTM D8425-22 - Standard Guide for the Use of Sodium Bentonite Needle-Punched Geotextile Waterproofing Systems with Cast-in-Place Concrete Below-Grade Foundation Construction
August 1, 2022 - ASTM International

1.1 This guide covers general installation guidelines of waterproofing membranes produced as a composite of sodium bentonite contained within two interlocked needle-punched geotextiles for designers to consider when developing project-specific drawings and specifications. This guide covers...

Advertisement