loading
ASTM C1782/C1782M-26 - Standard Specification for Segmental Concrete Paving Slabs
June 1, 2026 - ASTM International

This specification covers segmental concrete paving slabs manufactured for construction of pedestrian and roof applications for commercial and municipal projects where close dimensional tolerances for thickness, and/or length and width are not required. These slabs can be manufactured with a...

ASTM C1944/C1944M-26 - Standard Specification for Pedestal-Set Concrete Paving Slabs
June 1, 2026 - ASTM International

1.1 This specification covers the requirements for segmental concrete paving slabs used for construction of pedestal-set applications for commercial and municipal projects. These slabs can be manufactured with a dry-cast, wet-cast, or hydraulically-pressed process or some combination of...

ASTM C936/C936M-26 - Standard Specification for Solid Concrete Interlocking Paving Units
June 1, 2026 - ASTM International

1.1 This specification covers the requirements for interlocking concrete pavers manufactured for the construction of paved surfaces. 1.2 Concrete units covered by this specification shall be made with lightweight or normal weight aggregates or both. Note 1: If particular features are desired, such...

ASTM C140/C140M-26a - Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
June 1, 2026 - ASTM International

1.1 These test methods provide various testing procedures commonly used for evaluating characteristics of concrete masonry units and related concrete units. Methods are provided for sampling, measurement of dimensions, compressive strength, absorption, unit weight (density), moisture content,...

ASTM C1782/C1782M-25a - Standard Specification for Segmental Concrete Paving Slabs
December 1, 2025 - ASTM International

This specification covers segmental concrete paving slabs manufactured for construction of pedestrian and roof applications for commercial and municipal projects where close dimensional tolerances for thickness, and/or length and width are not required. These slabs can be manufactured with a...

ASTM D4867/D4867M-26 - Standard Test Method for Effect of Moisture on Asphalt Mixtures
May 1, 2026 - ASTM International

1.1 This test method covers procedures for preparing and testing laboratory-compacted asphalt mixture specimens for the purpose of measuring the effect of water on the tensile strength of the paving mixture. This test method is applicable to dense mixtures such as those appearing in the...

ASTM D6155-19(2025) - Standard Specification for Nontraditional Coarse Aggregates for Asphalt Paving Mixtures
December 1, 2025 - ASTM International

1.1 This specification covers the use of coarse aggregates not traditionally used in asphalt paving mixtures. These nontraditional aggregates can be described as any aggregate other than those described in Specifications D692/D692M, D693, D1139/D1139M, and D5106 (crushed stone, crushed...

ASTM D3666-26 - Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
January 1, 2026 - ASTM International

This specification covers the minimum requirements for field and laboratory personnel, for establishing and maintaining a quality system, and establishes minimum qualifications for agencies engaged in the testing and inspection of road and paving materials. This specification can be used as...

ASTM C216-26a - Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
June 1, 2026 - ASTM International

1.1 This specification covers brick intended for use in masonry supplying structural or facing components, or both, to the structure. 1.2 The requirements of this specification apply at the time of purchase. The use of results from testing of brick extracted from masonry structures for determining...

ASTM C1088-26 - Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
June 1, 2026 - ASTM International

1.1 This specification covers thin veneer brick units made from clay, shale, fire clay, sand, or mixtures thereof, and fired to incipient fusion for use in adhered or fastened veneer applications. Three types of thin veneer brick units in each of two grades are covered. In this specification, the...

ASTM D6932/D6932M-26 - Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Asphalt Mixtures
May 1, 2026 - ASTM International

4.1 This guide provides information to assist engineers with the design requirements and construction guidelines for paving an open-graded friction course (OGFC) surface layer. An OGFC is primarily used to improve the skid resistance and wear resistance of an asphalt pavement by providing an...

ASTM D8667-26 - Standard Test Method for Determining Intermediate and Low-Temperature Rheological Properties of Asphalt Binders Using a Dynamic Shear Rheometer (DSR)
May 1, 2026 - ASTM International

1.1 This test method covers the determination of parameters calculated from the measurement of modulus (G*) and phase angle (d) of asphalt binders when tested in dynamic (oscillatory) shear using parallel plate geometry in accordance with Test Method D7175. These parameters are considered important...

ASTM C1944/C1944M-25 - Standard Specification for Pedestal-Set Concrete Paving Slabs
December 1, 2025 - ASTM International

1.1 This specification covers the requirements for segmental concrete paving slabs used for construction of pedestal-set applications for commercial and municipal projects. These slabs can be manufactured with a dry-cast, wet-cast, or hydraulically-pressed process or some combination of...

ASTM D8-26 - Standard Terminology Relating to Materials for Roads and Pavements
March 1, 2026 - ASTM International

1.1 This standard incorporates generic terms and generic definitions of terms specifically associated with road and paving materials. These generic terms and definitions are used within the standards developed by Committee D04 on Road and Paving Materials. 1.2 Only terms that appear...

ASTM D3666-25 - Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
November 1, 2025 - ASTM International

This specification covers the minimum requirements for field and laboratory personnel, for establishing and maintaining a quality system, and establishes minimum qualifications for agencies engaged in the testing and inspection of road and paving materials. This specification can be used as...

ASTM C140/C140M-26 - Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
January 1, 2026 - ASTM International

1.1 These test methods provide various testing procedures commonly used for evaluating characteristics of concrete masonry units and related concrete units. Methods are provided for sampling, measurement of dimensions, compressive strength, absorption, unit weight (density), moisture content,...

ASTM C216-26 - Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
February 1, 2026 - ASTM International

1.1 This specification covers brick intended for use in masonry supplying structural or facing components, or both, to the structure. 1.2 The requirements of this specification apply at the time of purchase. The use of results from testing of brick extracted from masonry structures for determining...

ASTM C1782/C1782M-25 - Standard Specification for Segmental Concrete Paving Slabs
June 1, 2025 - ASTM International

This specification covers segmental concrete paving slabs manufactured for construction of pedestrian and roof applications for commercial and municipal projects where close dimensional tolerances for thickness, and/or length and width are not required. These slabs can be manufactured with a...

ASTM D946/D946M-25a - Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction
November 1, 2025 - ASTM International

1.1 This specification covers asphalt binder for use in the construction of pavements. Note 1: For asphalt binders graded by viscosity at 60?°C, see Specification D3381/D3381M. For performance-graded asphalt binder, see Specification D6373 or D8239. 1.2 This specification covers the following...

ASTM D8518-25 - Standard Guide for Application of Hot-Applied Rubberized Asphalt Roofing and Waterproofing
December 1, 2025 - ASTM International

4.1 Establishing standard practices and recommended procedures is a critical step required to achieve quality roofing and waterproofing system installations. This guide describes preparing typical substrates to receive hot-applied rubberized asphalt (HRA), melting and application of HRA, typical...

Advertisement