loading
IEEE SOFTWARE STANDARDS - SOFTWARE ENGINEERING STANDARDS: A USER'S ROAD MAP
IEEE
A description is not available for this item.
STANDARDS MANAGEMENT - STANDARDS MANAGEMENT: A HANDBOOK FOR PROFITS
ANSI
A description is not available for this item.
ISO/IEC/IEEE 16085 - Systems and software engineering — Life cycle processes — Risk management
January 1, 2021 - ISO

Overview This document: - provides risk management elaborations for the processes described in ISO/IEC/IEEE 15288 and ISO/IEC/IEEE 12207, - provides the users of ISO/IEC/IEEE 15288, ISO/IEC/IEEE 12207 and their associated elaboration standards with common...

ISO/IEC 23531 - Systems and software engineering — Capabilities of issue management tools
December 1, 2020 - ISO

This document defines the capabilities of issue management tools and is used to select the most appropriate one from many issue management tools. The evaluation and selection of the issue management tools is performed in accordance with ISO/IEC 20741 which defines the...

ISO/IEC 29110-4-2 - Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 4-2: Software engineering: Profile specifications: Organizational management profile group
March 1, 2021 - ISO

This document provides a profile specification for the organizational management profile. The organizational management profile applies to VSEs involved in systems engineering and/or software engineering development. This document provides links to the subset of...

ISO/IEC/IEEE 24748-3 - Systems and software engineering — Life cycle management — Part 3: Guidelines for the application of ISO/IEC/IEEE 12207 (software life cycle processes)
October 1, 2020 - ISO

This document is a guideline for the application of ISO/IEC/IEEE 12207:2017. This document establishes guidance to implement a common framework for software life cycle processes, with well-defined terminology, that can be referenced by the software industry. This document...

ISO/IEC 5055 - Information technology — Software measurement — Software quality measurement — Automated source code quality measures
March 1, 2021 - ISO

Purpose The measures in this standard were calculated from detecting and counting violations of good architectural and coding practices in the source code that could result in unacceptable operational risks or excessive costs. Establishing standards for these measures at the source code level is...

ISO/IEC DIS 29110-6-1 - Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 6-1: Software engineering — Specific Space Profile Specifications
January 18, 2021 - ISO

Industry and large organisations recognize the value of VSEs, i.e. enterprises, organisations (e.g. government agency, non-profit organization), projects or departments with up to 25 people, in contributing with emerging new technology that bigger organisations cannot use them as easily nor...

ISO TR 52127-2 - Energy performance of buildings — Building automation, controls and building management — Part 2: Explanation and justification of ISO 52127-1
February 1, 2021 - ISO

This document contains information to support the correct understanding, use and adoption of ISO 52127-1.

ISO/IEC/IEEE 16326 - Systems and software engineering — Life cycle processes — Project management
December 1, 2019 - ISO

Purpose This document is intended to aid project managers in managing to successful conclusion those projects concerned with systems, including software systems. This document specifies the required content of the project management plan (PMP). This document also quotes the extracted...

ISO/IEC TS 25025 - Information technology — Systems and software Quality Requirements and Evaluation (SQuaRE) — Measurement of IT service quality
March 1, 2021 - ISO

This document defines quality measures useful for requirements and evaluation of IT service quality in terms of characteristics and sub-characteristics defined in ISO/IEC TS 25011. This document contains a basic set of quality measures for each characteristic and sub-characteristic. This...

ISO 14009 - Environmental management systems — Guidelines for incorporating material circulation in design and development
December 1, 2020 - ISO

This document gives guidelines for assisting organizations in establishing, documenting, implementing, maintaining and continually improving material circulation in their design and development in a systematic manner, using an environmental management system (EMS) framework. These guidelines...

ISO TR 11462-3 - Guidelines for implementation of statistical process control (SPC) — Part 3: Reference data sets for SPC software validation
June 1, 2020 - ISO

This document describes examples for software validation for SPC software implementing the standards of the ISO 7870 series on control charts and the ISO 22514 series on capability and performance. In detail ISO 7870-2, ISO 22514-2 and ISO...

ISO 27186 - Active implantable medical devices — Four-pole connector system for implantable cardiac rhythm management devices — Dimensional and test requirements
November 1, 2020 - ISO

This document specifies a four-pole connector system for implantable cardiac rhythm management (CRM) devices which have pacing, electrogram sensing and/or defibrillation functions. This document includes requirements for the connector portion of an implantable lead as well as for the mating...

ISO 5840-2 - Cardiovascular implants — Cardiac valve prostheses — Part 2: Surgically implanted heart valve substitutes
January 1, 2021 - ISO

This document is applicable to heart valve substitutes intended for implantation in human hearts, generally requiring cardiopulmonary bypass and generally with direct visualization. See Annex E for examples of surgical heart valve substitutes and their components. This document is applicable to...

ISO 16175-1 - Information and documentation — Processes and functional requirements for software for managing records — Part 1: Functional requirements and associated guidance for any applications that manage digital records
July 1, 2020 - ISO

This document provides model, high-level functional requirements and associated guidance for software applications that are intended to manage digital records (including digital copies of analogue source records), either as the main purpose of the application or as a part of an application...

ISO DIS 9564-5 - Financial services — Personal Identification Number (PIN) management and security — Part 5: Methods for the generation, change, and verification of PINs and card security data using the advanced encryption standard
April 14, 2021 - ISO

This document provides requirements and guidance for methods of Issuer PIN Management using AES. It additionally defines a method for generating and verifying Card Security Codes using AES. The processes defined in this Standard (in order as presented) are: - PIN Generation - PIN Change -...

Advertisement