loading
API PETROLEUM PROCESS - Petroleum Process Stream Term Included in the Chemical Substances Inventory Under the Toxic Substances Control Act (TSCA)
January 1, 1983 - API

This document lists the entries for petroleum process streams and related chemical substances which are included in the Toxic Substances Control Act Chemical Substances Inventory (EPA, May, 1979) or in Cumulative Supplement II (EPA, May, 1982, TS-799). It does not include any items which may be...

IEEE PETRO - IEEE PETROCHEMICAL
IEEE
A description is not available for this item.
SPE PETROLEUM INDEX - SOCIETY OF PETROLEUM ENGINEERS PUIBLICATIONS CATALOG
SPE/PETROL
A description is not available for this item.
ASCE PETROCHEM FACILITY - PETROCHEMICAL FACILITY THREE-BOOK SET
ASCE
A description is not available for this item.
GMP.PBT+PET.004 - PBT+PET - 30% Glass Fiber Reinforced/Mineral Filled, Integrally Colored, UV Stabilized, Injection Moldable
April 1, 2013 - GMNA

This specification covers the properties of a 30% glass fiber reinforced/mineral filled, ultraviolet (UV) stabilized, injection moldable polybutylene terephthalate and polyethylene terephthalate blend (PBT+PET). Material Description. Approved paint systems that can be used on this material...

GMP.PBT+PET.003 - PBT+PET - 40% Glass Fiber Reinforced/Mineral Filled, 9200 MPa Flexural Modulus
July 1, 2014 - GMNA

This specification covers the properties of a 40% glass fiber reinforced/mineral filled, pellet form, injection molding polyester compound with a nominal flexural modulus of 9200 MPa. PAINTABILITY. Approved paint systems that can be used on the material are listed in the GM Approved Paint On...

GMP.PBT+PET.001 - PBT+PET – 30% Glass fiber Reinforced/Mineral Filled, Weatherable
April 1, 2013 - GMNA

This specification covers the properties of a 30% glass fiber reinforced/mineral filled, weatherable, pellet form injection molding, polybutylene terephthalate + polyeth-ylene terephthalate compound.

ASTM D4603-26 - Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
April 1, 2026 - ASTM International

1.1 This test method is for the determination of the inherent viscosity of poly(ethylene terephthalate) (PET) soluble at 0.50?% concentration in a 60/40 phenol/1,1,2,2-tetrachloroethane solution by means of a glass capillary viscometer. Highly crystalline forms of PET that are not...

ASTM D7884-26 - Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography
July 1, 2026 - ASTM International

4.1 The presence of 4-CBA and p-TOL in PTA used for the production of polyester is undesirable because they can affect the PET quality (such as contribute to fiber breaks), the polymerization process, and 4-CBA imparts coloration to the polymer due to thermal instability. 4.2 Determining the...

ASTM D5814-26 - Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test
February 1, 2026 - ASTM International

5.1 Presence of paper, metal, or incompatible polymer contamination in poly(ethylene terephthalate) renders the recycled polymer unfit for use in secondary product manufacturing operations. This procedure is useful for identifying different types of contamination in recycled PET flakes.

ASTM F1004-25 - Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures
December 1, 2025 - ASTM International

1.1 This consumer safety specification covers minimum safety performance requirements, test methods, and requirements for labeling and instructional material to minimize hazards to young children resulting from the normal use and reasonably foreseeable misuse and abuse of expansion gates and...

ASTM F1004-25e1 - Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures
December 1, 2025 - ASTM International

1.1 This consumer safety specification covers minimum safety performance requirements, test methods, and requirements for labeling and instructional material to minimize hazards to young children resulting from the normal use and reasonably foreseeable misuse and abuse of expansion gates and...

ASTM E3489-25 - Standard Guide for Odor Evaluation of Absorbent Hygiene Articles
May 1, 2025 - ASTM International

1.1 This guide provides guidance in establishing procedures to be used in the design and analysis of odor evaluation studies intended to quantitatively assess product odors and odor control of absorbent hygiene products including, but not limited to, adult, baby, feminine, and pet absorbent...

ASTM D5814-23 - Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test
November 1, 2023 - ASTM International

5.1 Presence of paper, metal, or incompatible polymer contamination in poly(ethylene terephthalate) renders the recycled polymer unfit for use in secondary product manufacturing operations. This procedure is useful for identifying different types of contamination in recycled PET flakes.

ASTM D7884-24 - Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography
March 1, 2024 - ASTM International

4.1 The presence of 4-CBA and p-TOL in PTA used for the production of polyester is undesirable because they can affect the PET quality (such as contribute to fiber breaks), the polymerization process, and 4-CBA imparts coloration to the polymer due to thermal instability. 4.2 Determining the...

ASTM D7884-23 - Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography
November 1, 2023 - ASTM International

4.1 The presence of 4-CBA and p-TOL in PTA used for the production of polyester is undesirable because they can affect the PET quality (such as contribute to fiber breaks), the polymerization process, and 4-CBA imparts coloration to the polymer due to thermal instability. 4.2 Determining the...

ASTM D5991-23 - Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake
February 1, 2023 - ASTM International

5.1 Presence of even low concentrations of PVC in recycled PET flakes results in equipment corrosion problems during processing. The PVC contamination level shall dictate the market for use of the recycled polymer in secondary products. Procedures presented in this practice are used to...

Advertisement