loading
Phased Array Antennas 2nd Edition
January 1, 2010 - WILEY

An in-depth treatment of array phenomena and all aspects of phased array analysis and design Phased Array Antennas, Second Edition is a comprehensive reference on the vastly evolving field of array antennas. The Second Edition continues to provide an...

Array and Phased Array Antenna Basics
January 1, 2005 - WILEY

Reflecting a growing interest in phased array antenna systems, stemming from radar, radio astronomy, mobile communications and satellite broadcasting, Array and Phased Array Antenna Basics introduces the principles of array and phased array...

ISO 19675 - Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT)
January 1, 2017 - ISO

This document specifies requirements for the dimensions, material and manufacture of a steel block for calibrating ultrasonic test equipment used in ultrasonic testing with the phased array technique.

ASTM E2904 - Standard Practice for Characterization and Verification of Phased Array Probes
November 1, 2017 - ASTM

This standard practice covers measurement procedures for evaluating certain characteristics of phased-array ultrasonic probes that are used with phased-array ultrasonic examination instrumentation. This standard practice describes means for obtaining performance data...

ASTM E2904-17 - Standard Practice for Characterization and Verification of Phased Array Probes
November 1, 2017 - ASTM International

1.1 This standard practice covers measurement procedures for evaluating certain characteristics of phased-array ultrasonic probes that are used with phased-array ultrasonic examination instrumentation. 1.2 This standard practice describes means for obtaining performance...

ASTM E2904-12 - Standard Practice for Characterization and Verification of Phased Array Probes
November 1, 2012 - ASTM International

1.1 This standard practice covers measurement procedures for evaluating certain characteristics of phased-array ultrasonic probes that are used with phased-array ultrasonic examination instrumentation. 1.2 This standard practice describes means for obtaining performance...

NEMA MS 9 - Characterization of Phased Array Coils for Diagnostic Magnetic Resonance Images
January 1, 2008 - NEMA

This Standards publication defines test methods for measuring the signal-to-noise ratio and image uniformity of MR images produced using receive-only phased array coils. Other coil configurations have been addressed in MS 1, MS 3, and MS 6.

Phased-Array Radar Design: Application of radar fundamentals
January 1, 2009 - IET

The following topics are discussed in this book: radar target detection; radar tracking; matched filtering; radar signal processing; search radar; data association; target classification; phased array radar; interference suppression; missile defense radar design; early warning radar...

ASTM E2491-23 - Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems
June 1, 2023 - ASTM International

1.1 This guide covers procedures for evaluating some performance characteristics of phased-array ultrasonic examination instruments and systems. 1.2 Evaluation of these characteristics is intended to be used for either comparing instruments and systems or, by periodic repetition, for...

ASTM E2491-13(2018) - Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems
November 1, 2018 - ASTM International

5.1 This guide is intended to evaluate performance assessment of combinations of phased-array probes and instruments. It is not intended to define performance and acceptance criteria, but rather to provide data from which such criteria may be established. 5.2 Recommended procedures...

ASTM E2491-13 - Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems
June 1, 2013 - ASTM International

5.1 This guide is intended to evaluate performance assessment of combinations of phased-array probes and instruments. It is not intended to define performance and acceptance criteria, but rather to provide data from which such criteria may be established. 5.2 Recommended procedures...

ASTM E2491-08 - Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems
July 1, 2008 - ASTM International

This guide is intended to evaluate performance assessment of combinations of phased-array probes and instruments. It is not intended to define performance and acceptance criteria, but rather to provide data from which such criteria may be established. Recommended procedures described...

ASTM E2491-06 - Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Examination Instruments and Systems
May 1, 2006 - ASTM International

This guide is intended to evaluate performance assessment of combinations of phased-array probes and instruments. It is not intended to define performance and acceptance criteria, but rather to provide data from which such criteria may be established. Recommended procedures described...

Synthesized Transmission Lines: Design, Circuit Implementation, and Phased Array Applications
May 1, 2017 - WILEY

An original advanced level reference appealing to both the microwave and antenna communities An overview of the research activity devoted to the synthesis of transmission lines by means of electrically small planar elements, highlighting the main microwave applications and the potential for circuit...

DI-MGMT-80627 - PHASED ARRAY SENSOR TASKING RESPONSE REPORT (STRR)
June 29, 1988 - NPFC
A description is not available for this item.
DS/EN ISO 18563-1 - Non-destructive testing – Characterization and verification of ultrasonic phased array equipment – Part 1: Instruments
July 2, 2015 - DS

This part of ISO 18563 identifies the functional characteristics of a multichannel ultrasonic phased array instrument used for phased array probes and provides methods for their measurement and verification. This part of ISO 18563 can partly be applicable to ultrasonic...

ISO 18563-1 - Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments
June 15, 2015 - ISO

This part of ISO 18563 identifies the functional characteristics of a multichannel ultrasonic phased array instrument used for phased array probes and provides methods for their measurement and verification. This part of ISO 18563 can partly be applicable to ultrasonic...

DIN EN 16392-2 - Non-destructive testing - Characterisation and verification of ultrasonic phased array equipment - Part 2: Probes
June 1, 2014 - DIN

This European Standard covers linear phased array probes used for ultrasonic non-destructive testing in contact technique (with or without a wedge) or in immersion technique, with centre frequencies in the range 0,5 MHz - 10 MHz. This European Standard specifies the characterisation...

DS/EN 16392-2 - Non-destructive testing – Characterisation and verification of ultrasonic phased array equipment – Part 2: Probes
April 3, 2014 - DS

This document covers linear phased array probes used for ultrasonic non-destructive testing in contact technique (with or without a wedge) or in immersion technique, with centre frequencies in the range 0,5 MHz - 10 MHz. This document specifies the characterisation tests that have to...

NTIS PB86237203 - INTERELEMENT INTERACTIONS IN PHASED ARRAYS: THEORY
NTIS
A description is not available for this item.
Advertisement