loading
ASTM E2875/E2875M-26 - Standard Guide for Personal Protective Equipment for the Handling of Flat Glass
April 1, 2026 - ASTM International

1.1 This guide covers the minimum requirements for proper personal protective equipment (PPE) for the safe handling of flat glass. 1.2 Purpose-When engineering, administrative, and work practice controls are not feasible, the remaining hazard must be controlled with...

ASTM E3527-26 - Standard Guide for Preservation of Microorganisms
April 1, 2026 - ASTM International

5.1 This guide describes best practices to address characterization, storage, maintenance, and stabilization of microorganisms and the critical need for standardized and reliable methods in microbiology. 5.2 Proper preservation of microorganisms is fundamental to numerous scientific, industrial,...

ASTM F3032-26 - Standard Specification for Clothing for Protection Against Radiological Contamination
February 1, 2026 - ASTM International

1.1 This specification establishes minimum design, performance, labeling, and documentation criteria for protective ensembles, protective garments, protective gloves, protective footwear, and protective hoods for use at facilities with radioactive material...

ASTM F3537-25 - Standard Guide for Respirator Fit Testing Methods
December 1, 2025 - ASTM International

4.1 The purpose of this guide is to provide clear and consistent guidance with regard to the respirator fit-testing components of an effective respiratory protection program. 4.2 The respirator fit test itself is simply one facet of fit testing. An effective program requires much more, including a...

ASTM E2349-26 - Standard Practice for Safety Requirements in Metal Casting Operations: Sand Preparation, Molding, and Core Making; Melting and Pouring; and Cleaning and Finishing
January 1, 2026 - ASTM International

This practice covers the safety requirements for applying the design, construction, and operation of machinery and equipment used in metal casting operations. These operations include sand preparation, molding, and core making; melting and pouring; and cleaning and finishing. This practice...

ASTM E2458-26 - Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents and Toxins from Nonporous Surfaces
January 15, 2026 - ASTM International

4.1 These practices should be used only to collect visible samples that are suspected biological agents and toxins and have been field screened as defined by the FBI-DHS-HHS/CDC Coordinated Document for explosive hazard, radiological hazard, and other acute chemical hazards. 4.2 These practices...

ASTM E3095-25 - Standard Guide for Surrogate Materials for Field Evaluation of Nucleic Acid-Based On-Site Biological Assessment Technologies
November 1, 2025 - ASTM International

4.1 This guide provides guidance on how a surrogate material can be selected and inserted into a field workflow for confidence checks and process assessments of on-site biological assessment technologies to demonstrate that the technology is working in the field environment in the hands of...

ASTM F2965-25 - Standard Guide for Selection of Walkway Surfaces and Treatments When Considering Aggressive Contaminant Conditions in Commercial and Industrial Environments (Not Including Construction Work)
September 1, 2025 - ASTM International

1.1 This guide is intended to assist in the selection of walkway surfaces and treatments where the reasonably foreseeable presence of aggressive contaminants produces the risk of a fall event(s) in commercial and industrial environments (not including construction work), for persons wearing...

ASTM F3794-25 - Standard Practice for Multivariate Fit and Accommodation for Exoskeleton Manufacturers and Designers
November 1, 2025 - ASTM International

5.1 The U.S. exoskeleton marketplace currently lacks a consistent sizing structure and clear criteria for selecting sizes. This inconsistency likely stems from the absence of comprehensive national anthropometric data tailored to exoskeleton design applications. The significant variations in sizing...

ASTM D1230-25 - Standard Test Method for Flammability of Apparel Textiles
June 1, 2025 - ASTM International

5.1 Test Method D1230 cannot be recommended for the acceptance testing of commercial shipments since Federal regulations require apparel fabrics to meet the criteria of 16 CFR Part 1610 and correlation of test results with actual performance has not been established. Although Test Method D1230 is...

ASTM E2875/E2875M-24 - Standard Guide for Personal Protective Equipment for the Handling of Flat Glass
July 1, 2024 - ASTM International

1.1 This guide covers the minimum requirements for proper personal protective equipment (PPE) for the safe handling of flat glass. 1.2 Purpose-When engineering, administrative, and work practice controls are not feasible, the remaining hazard must be controlled with...

ASTM D7909-21a(2025) - Standard Guide for Placement of Intentional Leaks During Electrical Leak Location Surveys of Geomembranes
April 1, 2025 - ASTM International

1.1 This guide is for placing leaks in geomembranes before performing an electrical leak location survey. The geomembranes can be bare (not covered) or can be covered with water or moist soil. 1.2 This guide is intended to serve as an additional quality control/quality assurance (QC/QA)...

ASTM F2373-24 - Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months through 23 Months
December 15, 2024 - ASTM International

1.1 This consumer safety performance specification provides safety and performance requirements for various types of public use play equipment such as, but not limited to, composite play structures, climbing structures, to-fro swings, spring rocking equipment, and slides. It is...

ASTM F3175-16(2025) - Standard Guide for Training and Equipping Search and Rescue Personnel Operating on Mountain Bikes (Mountain Bike SAR Endorsement)
January 1, 2025 - ASTM International

1.1 This guide establishes the minimum training and equipment requirements, including general and field knowledge, skills, and abilities, for search and rescue personnel who operate on mountain bikes. 1.2 Mountain Bike Search and Rescue Endorsed individuals may, under qualified supervision,...

ASTM F1564-13(2024) - Standard Specification for Structure-Mounted Insulating Work Platforms for Electrical Workers
September 1, 2024 - ASTM International

This specification covers the design testing of mechanical and electrical characteristics of structure-mounted insulating work platforms for electrical workers in conjunction with personal protective equipment while working on energized circuits. This shall include, but not...

ASTM F309-24 - Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
April 1, 2024 - ASTM International

4.1 This practice provides for the safe collection of propellants and other hazardous aerospace fluids so that they can be tested and evaluated. The evaluation will generally include tests for contamination and this practice outlines steps that will reduce the chances of gathering contaminants...

ASTM E3095-17(2024) - Standard Guide for Surrogate Materials for Field Evaluation of Nucleic Acid-Based On-Site Biological Assessment Technologies
July 1, 2024 - ASTM International

4.1 This guide provides guidance on how a surrogate material can be selected and inserted into a field workflow for confidence checks and process assessments of on-site biological assessment technologies to demonstrate that the technology is working in the field environment in the hands of...

UL 752 - Bullet-Resisting Equipment
October 17, 2023 - ULSE

1.1 These requirements cover materials, devices, and fixtures used to form bullet-resisting barriers which protect against robbery, holdup, or armed attack such as those by snipers. 1.2 This standard can also be used to determine the bullet resistance of building components that do not fit the...

ASTM E3131-17(2024) - Standard Specification for Nucleic Acid-Based Systems for Bacterial Pathogen Screening of Suspicious Visible Powders
July 1, 2024 - ASTM International

1.1 General: 1.1.1 This specification provides system designers, manufacturers, integrators, procurement personnel, end users/practitioners, and responsible authorities a common set of parameters to match the capabilities of biological assessment tools with user needs. 1.1.2 This specification is...

Advertisement