1.1 This specification covers flexible sheet made from thermoplastic polyolefin (TPO) as the principal polymer, intended for use in single-ply roofing membranes exposed to the weather. The sheet shall contain reinforcing fabrics or scrims. 1.2 The tests and property limits used to characterize the...
1.1 This practice covers acoustic emission (AE) examination or monitoring of panel and plate-like composite structures made entirely of fiber/polymer composites. 1.2 The AE examination detects emission sources and locates the region(s) within the composite structure where the emission originated....
1.1 This specification covers the manufacture of aviation turbine fuel that consists of conventional and synthetic blending components. 1.2 See Appendix X2 for an expanded description of the procedure for the production and blending of synthetic blend components. 1.3 This specification applies only...
1.1 This guide provides information regarding masonry elements constructed at locations other than in-place. Prefabrication may occur on the jobsite or offsite and transported to the jobsite. This guide covers lintels, arches, sloped sills, spandrels, soffits, wall panels, and other masonry...
5.1 Significance of this Guide: 5.1.1 Continuous improvement (CI) is a fundamental element of an operation's quality management efforts. When CI is practiced daily from the top down through the organization, the other elements of quality management fall into place. 5.1.2 CI...
1.1 These test methods may be used to determine the water content of soils and the dry density of soils in place using Time Domain Reflectometry. 1.2 These test methods apply to soils that have 30?% or less by weight of their particles retained on the 19.0-mm [3/4-in.] sieve. 1.3 These test...
Narrow Your Results