loading
ANSI CHEMICAL - ANSI CHEMICAL
IHS
A description is not available for this item.
AGMA PLASTIC GEAR SET - AGMA PLASTIC GEAR SET
AGMA
A description is not available for this item.
DATA PLASTIC CD - PLASTIC DIGEST
DATA
A description is not available for this item.
GM PLASTICS BINDER - ENGINEERING MATERIALS AND PROCESSES - PLASTICS BINDER
GMNA
A description is not available for this item.
SEMI CHEMICALS/GASES - CHEMICALS/GASES
SEMI
A description is not available for this item.
SEMI CHEMICALS/REAGENTS - CHEMICALS/REAGENTS
SEMI
A description is not available for this item.
AWWA STORAGE SET - AWWA STORAGE SET
AWWA
A description is not available for this item.
CHEMICAL PROTECTIVE CLOTH - CHEMICAL PROTECTIVE CLOTHING
AIHA
A description is not available for this item.
ASTM F3427-25 - Standard Practice for Documenting Environmental Conditions for Utilization with Exoskeleton Test Methods
November 1, 2025 - ASTM International

4.1 This section provides a description of the environmental conditions listed in Section 1 and describes the sub-conditions within each condition. Examples provided for many of the conditions and sub-conditions are provided as guidance only. Each of the conditions described should be evaluated and...

ASTM D6282/D6282M-25 - Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations
March 1, 2025 - ASTM International

1.1 This guide addresses direct push soil samplers, which may also be driven into the ground from the surface or through prebored holes. The samplers can be continuous or discrete interval units. Samplers are advanced by static push, or impacts from hammers, or vibratory methods, or a combination...

ASTM D2684/D2684M-24 - Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products
May 1, 2024 - ASTM International

5.1 With the proper precautions and background experience, results can be useful for estimation of the loss of a packaged product through the walls of a container during shelf storage. The test is also useful for isolating the effects of a container design and materials, and is applicable...

ASTM D5364-14(2024) - Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units
April 1, 2024 - ASTM International

4.1 This guide provides information, requirements and recommendations for design professionals, fabricators, installers and end-users of FRP chimney liners. FRP is a cost-effective and appropriate material of construction for liners operating at moderate temperatures in a corrosive chemical...

ASTM D7121-05(2024) - Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum
May 1, 2024 - ASTM International

4.1 The Schob Type rebound pendulum is designed to measure the percentage resilience of a rubber compound as an indication of hysteretic energy loss that can also be defined by the relationship between storage modulus and loss modulus. The percent rebound measured is inversely proportional...

Advertisement