loading
AGMA PLASTIC GEAR SET - AGMA PLASTIC GEAR SET
AGMA
A description is not available for this item.
DATA PLASTIC CD - PLASTIC DIGEST
DATA
A description is not available for this item.
GM PLASTICS BINDER - ENGINEERING MATERIALS AND PROCESSES - PLASTICS BINDER
GMNA
A description is not available for this item.
ISO 15747 - Plastic containers for intravenous injections
September 1, 2018 - ISO

This document specifies requirements to the safe handling and the physical, chemical and biological testing of plastic containers for parenterals. This document is applicable to plastic containers for parenterals having one or more chambers and having a total nominal...

ASTM F1615-19(2024) - Standard Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers
January 1, 2024 - ASTM International

1.1 This specification covers nationally recognized requirements for the cautionary information to be placed on the label of 4-gal to 6-gal (15-L to 23-L) plastic open-head containers (buckets). It is not the intent of this specification to include any other labeling requirements,...

DS/EN ISO 15747 - Plastic containers for intravenous injections (ISO 15747:2018)
March 11, 2019 - DS

This document specifies requirements to the safe handling and the physical, chemical and biological testing of plastic containers for parenterals. This document is applicable to plastic containers for parenterals having one or more chambers and having a total nominal...

BS EN ISO 15747 - Plastic containers for intravenous injections
March 31, 2019 - BSI
A description is not available for this item.
BS EN ISO 15747 - TC - Tracked Changes (Redline) - Plastic containers for intravenous injections
February 28, 2020 - BSI
A description is not available for this item.
DIN EN ISO 15747 - Plastic containers for intravenous injections (ISO 15747:2018)
July 1, 2019 - DIN
A description is not available for this item.
ASTM F1615-19 - Standard Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers
May 1, 2019 - ASTM International

1.1 This specification covers nationally recognized requirements for the cautionary information to be placed on the label of 4 to 6-gal (15 to 23-L) plastic open-head containers (buckets). It is not the intent of this specification to include any other labeling requirements, such as...

ASTM E1888/E1888M-17(2025) - Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores
July 1, 2025 - ASTM International

1.1 This practice covers guidelines for acoustic emission (AE) examinations of pressurized containers made of fiberglass reinforced plastic (FRP) with balsa cores. Containers of this type are commonly used on tank trailers for the transport of hazardous chemicals. 1.2 This...

ASTM F1615 - Standard Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers
May 1, 2019 - ASTM

This specification covers nationally recognized requirements for the cautionary information to be placed on the label of 4 to 6-gal (15 to 23-L) plastic open-head containers (buckets). It is not the intent of this specification to include any other labeling requirements, such as those...

ASTM D6688-20(2026) - Standard Practice for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Technique
June 1, 2026 - ASTM International

4.1 Many types of printed matter, notably container labels, packaging materials, magazine and book covers, must be resistant to liquid materials that may contact them advertently or inadvertently. This practice permits an assessment of resistance of printed matter to several types of liquids...

DS/EN 16068 - Packaging - Rigid plastic containers - PET finish 38
June 14, 2012 - DS

This European Standard specifies the dimensions of the 38 mm screw finish with three (3) thread starts for flat waters and non-carbonated beverages. This finish can be used for aseptic filling and filling with introduction of nitrogen (0,7 bar max.). This finish is designed to take a tamper evident...

DIN EN 16068 - Packaging - Rigid plastic containers - PET finish 38
February 1, 2012 - DIN

This European Standard specifies the dimensions of the 38 mm screw finish with three (3) thread starts for flat waters and non-carbonated beverages. This finish can be used for aseptic filling and filling with introduction of nitrogen (0,7 bar max.). This finish is designed to take a tamper evident...

DS/EN 16063 - Packaging - Rigid plastic containers - Nomenclature of plastic finishes
June 14, 2012 - DS

This document specifies the dimension nomenclature for plastic finishes.

DIN EN 16063 - Packaging - Rigid plastic containers - Nomenclature of plastic finishes
February 1, 2012 - DIN

This European Standard specifies the dimension nomenclature for plastic finishes.

BS EN 16068 - Packaging - Rigid plastic containers - PET finish 38
January 31, 2012 - BSI
A description is not available for this item.
ASTM E1644-25 - Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
August 1, 2025 - ASTM International

5.1 This practice is intended for the digestion of lead in dust wipe samples collected during various lead hazard activities performed in and around buildings and related structures. 5.2 This practice is also intended for the digestion of lead in dust wipe samples collected during and after...

Advertisement