loading
AGMA PLASTIC GEAR SET - AGMA PLASTIC GEAR SET
AGMA
A description is not available for this item.
DATA PLASTIC CD - PLASTIC DIGEST
DATA
A description is not available for this item.
GM PLASTICS BINDER - ENGINEERING MATERIALS AND PROCESSES - PLASTICS BINDER
GMNA
A description is not available for this item.
AWWA STORAGE SET - AWWA STORAGE SET
AWWA
A description is not available for this item.
AWWA TANK SET - AWWA TANK SET
AWWA
A description is not available for this item.
ASTM D6639-25 - Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Site Investigations
July 1, 2025 - ASTM International

5.1 Concepts: 5.1.1 This guide summarizes the equipment, field procedures and interpretation methods used for the investigation of subsurface materials and geological structure as based on their properties to conduct, enhance or obstruct the flow of electrical currents induced in the ground by an...

ASTM D6282/D6282M-25 - Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations
March 1, 2025 - ASTM International

5.1 Direct Push Soil Sampling is used extensively in environmental site characterization of soils below ground surface and can also be used for subsurface geotechnical site characterization (3, 7-13). Limited early studies have been done using Direct Push Soil Sampling for environmental...

ASTM E3274-24 - Standard Guide for Management of Investigation-Derived Waste Associated with PFAS
February 1, 2024 - ASTM International

4.1 Perfluoroalkyl and polyfluoroalkyl substances (PFAS) are a family of more than 4700 synthetic organic chemicals. PFAS can withstand high temperatures and survive highly corrosive environments. They are used in the manufacture of coatings, surface treatments, and specialty chemicals in cookware,...

ASTM E3358-23a - Standard Guide for Per- and Polyfluoroalkyl Substances Site Screening and Initial Characterization
August 1, 2023 - ASTM International

4.1 PFAS are widely used in commercial and industrial applications worldwide (see Fig. 1). PFAS are of concern due to their documented persistence and their studied impacts on human health and the environmental. While there is no comprehensive source of information on the many individual PFAS...

ASTM E3358-23 - Standard Guide for Per- and Polyfluoroalkyl Substances Site Screening and Initial Characterization
February 1, 2023 - ASTM International

4.1 PFAS are widely used in commercial and industrial applications worldwide (see Fig. 1). PFAS are of concern due to their documented persistence and their studied impacts on human health and the environmental. While there is no comprehensive source of information on the many individual PFAS...

ASTM D6429-23 - Standard Guide for Selecting Surface Geophysical Methods
February 15, 2023 - ASTM International

5.1 This guide applies to commonly used surface geophysical methods for those applications listed in Table 1. The rating system used in Table 1 is based upon the ability of each method to produce results under average field conditions when compared to other methods applied to the same application....

AWWA D120 - Thermosetting FiberglassReinforced Plastic Tanks
June 7, 2019 - AWWA

This standard describes the composition, performance requirements, construction practices and workmanship, design, and methods of testing thermosetting fiberglass-reinforced plastic (FRP) tanks for the storage of water or other liquids used in water supply service. Limit of...

Advertisement