loading
ISA SAFETY PROFILES FOR R - Safety Profiles for Real-Time Ethernet-Based Industrial Automation Networks
January 1, 2009 - ISA

Part of the ISA/O3neida series, this book discusses network systems in industrial automation and their features related to real-time and functional safety requirements. The basics of standard Ethernet are introduced, specifying the Open System Interconnection (OSI) reference model layers and...

API SAFETY & FIRE BINDER - SAFETY AND FIRE PROTECTION BINDER
API
A description is not available for this item.
NEMA SAFETY GUIDE - SAFETY GUIDE FOR USE OF EXTENSION CORDS
NEMA
A description is not available for this item.
SWRI SAFETY & HEALTH - Safety & Health Field Manual
SWRI
A description is not available for this item.
ISA SAFETY INSTRUMENTED S - SAFETY INSTRUMENTED SYSTEMS: A LIFE-CYCLE APPROACH
ISA
A description is not available for this item.
ASTM C910-16(2026) - Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
April 1, 2026 - ASTM International

This test method details the standard procedures for the determination of the bond and cohesion of one-part elastomeric solvent release-type sealants after high- and low-temperature aging. The materials and apparatuses needed for this test procedure are an extension machine, a forced-draft type...

ASTM C1866/C1866M-25 - Standard Specification for Ground-Glass Pozzolan for Use in Concrete
July 1, 2025 - ASTM International

1.1 This specification covers ground-glass pozzolans for use in concrete where pozzolanic action is desired. This specification applies to ground glass from sources that consist of container glass, plate glass, or E-glass. 1.2 The standard references notes...

ASTM C1014-26 - Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
January 1, 2026 - ASTM International

1.1 This specification covers the composition and the physical properties of spray-applied mineral fiber thermal and sound absorbing insulation. 1.2 These mineral fibers shall be pneumatically conveyed to a spray nozzle where they are mixed with water. These mineral fibers shall have a binder...

ASTM C612-25 - Standard Specification for Mineral Fiber Block and Board Thermal Insulation
November 15, 2025 - ASTM International

1.1 This specification covers the classification, composition, dimension, and physical properties of mineral fiber (rock, slag, or glass) semi-rigid and rigid board intended for the use as thermal insulation on surfaces operating at temperatures between 0°F (-18°C) and 1800°F (982°C). For...

ASTM C1350M-25 - Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 108 Pa·s to Approximately 1013 Pa·s) by Beam Bending (Metric)
July 1, 2025 - ASTM International

1.1 This test method covers the determination of glass viscosity from approximately 108?Pa·s to approximately 1013?Pa·s by measuring the rate of viscous bending of a simply loaded glass beam.2 Due to the thermal history of the glass, the viscosity may not represent conditions...

ASTM D3424-25 - Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
September 1, 2025 - ASTM International

1.1 This standard describes procedures for the determination of the relative lightfastness and weatherability of printed matter under the following conditions, which involve exposure to natural daylight or accelerated procedures in the laboratory: 1.1.1 Method 1-Daylight behind window glass,...

ASTM E3491-25 - Standard Practice for Determination of Laminated Glass Effective Thickness
May 1, 2025 - ASTM International

5.1 LG combines multiple plies of glass bonded with polymeric interlayers into a single lite. The structural response of the lite and the distribution of internal forces is dependent on the degree of shear coupling of each interlayer between the adjacent glass plies. Shear coupling in...

ASTM D6100-25 - Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)
September 1, 2025 - ASTM International

1.1 This specification covers requirements and test methods for the material, dimensions, and workmanship, and the properties of extruded, compression molded and injection molded polyoxymethylene (POM) sheet, plate, rod, and tubular bar shapes, excluding pipe and fittings. 1.2 The properties...

ASTM C786/C786M-25 - Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods
April 1, 2025 - ASTM International

1.1 This test method covers wet sieving techniques for determination of fineness of hydraulic cement and raw materials by means of the 300-μm (No. 50), the 150-μm (No. 100), and the 75-μm (No. 200) sieves. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as...

ASTM C856/C856M-25 - Standard Practice for Petrographic Examination of Hardened Concrete
February 1, 2025 - ASTM International

This practice outlines the standard procedures for performing petrographic examination of hardened concrete samples. The samples examined may be taken from concrete constructions, that is, all sorts of objects, units, or structures that have been built of hydraulic cement concrete. They may also be...

ASTM D3658-01(2024) - Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
September 1, 2024 - ASTM International

1.1 This test method covers the simplistic comparison of strengths of glass/metal joints when the adhesive is cured by ultraviolet (UV) radiation and standard specimens are used and tested under specified conditions of preparation, radiation, and load. 1.2 This test method involves torque...

ASTM C1339/C1339M-24 - Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts
July 1, 2024 - ASTM International

5.1 Chemical-resistant polymer machinery grouts are used to provide precision support for machinery or equipment. Note 2: The machinery or equipment or support bases or plates, or combination thereof, are positioned to the precise elevation and location required. The bases or plates...

Advertisement