1.1 The purpose of these practices is to specify procedures for the calibration of force-measuring instruments. Procedures are included for the following types of instruments: 1.1.1 Elastic force-measuring instruments, and 1.1.2 Force-multiplying systems, such as balances and small platform...
1.1 These practices cover the calculation of profilograph response to longitudinal profiles of traveled surface roughness. 1.2 These practices utilize computer simulations to obtain profilograph responses, including surface sensing wheel (recording wheel) vertical displacement and reference...
4.1 This standard may be used to classify sUAS resources utilized for land search and rescue. 4.2 Classification of sUAS land search and rescue resources is based upon the complete sUAS including payload, communications systems. 4.2.1 This classification identifies the mechanical features of the...
5.1 In this guide, test methodologies and data collection metrics for demonstrating adequate design and performance characteristics of DAA systems in accordance with Specification F3442/F3442M are outlined. DAA systems are essential for BVLOS flight operations for UAS as they enable the UAS to...
5.1 Slip hazards created by aggressive contaminants on walkways may be found in commercial and industrial settings including fresh produce display areas, manufacturing processes, food preparation and processing areas, rendering operations, transportation and cargo handling activities, petroleum...
This specification covers requirements for the methods of application and finishing of gypsum board. Construction details for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized...
1.1 Data Sharing Security Measures-This standard presents an opportunity to share more thorough, reliable upstream data, in a way that also preserves and protects companies' intellectual property and upstream documents. The use of a technology platform, underpinned by a distributed ledger,...
4.1 This section provides a description of the environmental conditions listed in Section 1 and describes the sub-conditions within each condition. Examples provided for many of the conditions and sub-conditions are provided as guidance only. Each of the conditions described should be evaluated and...
1.1 This test method covers the procedure for determining the resistance of a mechanical cone as it is advanced into subsurface soils at a steady rate. 1.2 This test method may also be used to determine the frictional resistance of a cylindrical sleeve located behind the conical point as it is...
5.1 This guide is intended to help the user identify and define demands made upon the roofing system by factors such as weather, climate, and building use, in light of the fact that many roofs are specified with secondary features that have quantifiable or non-quantifiable environmental or...
1.1 This performance specification covers minimum requirements to determine the electric performance of conductive clothing. 1.1.1 Type 1 conductive clothing is intended to be used by workers as protection from electric field strength for applications in ac systems up to 800 kV, rms, at 50/60 Hz...
5.1 General-This procedure is used for evaluation of the structural integrity of atmospheric storage tanks. The AE method can detect flaws which are in locations that are stressed during pressurization. Such locations include the tank wall, welds attaching pads to the tank, nozzle attachments, and...
1.1 This guide provides information and criteria for selection of remote sensing systems for the detection and monitoring of oil on water. 1.2 This guide applies to the remote sensing of oil on water involving a variety of sensing devices used alone or in combination. The sensors may be mounted on...
4.1 This section provides a description of the environmental conditions listed in Section 1 and describes the sub-conditions within each condition. Examples provided for many of the conditions and sub-conditions are provided as guidance only. Each of the conditions described should be evaluated and...
1.1 This test method covers the calibration of the force (or torque) transducer and associated instrumentation of a mounted test wheel by using a calibration platform. 1.2 This test method is a static calibration, simulating the traction force between a tire and the pavement. 1.3 In the case...
1.1 This consumer safety performance specification provides safety and performance requirements for various types of public use play equipment such as, but not limited to, composite play structures, climbing structures, to-fro swings, spring rocking equipment, and slides. It is intended to apply to...
1.1 This specification covers the design testing of mechanical and electrical characteristics of structure-mounted insulating work platforms used by electrical workers. 1.2 Platforms covered by this specification are singleworker platforms not exceeding 9 ft (2.75 m) in length....
1.1 These test methods cover the performance of pallets and related structures, functioning as skids, bases, platforms, and bins in materials handling and shipping. Their use facilitates the protection of both packaged and unpackaged products during storage and transportation. The test...
5.1 This standard provides guidance for using cryptographic credentials to secure localized A2X-Direct communications as defined in 5.3. It is not intended to specify or infer the security requirements for any one A2X application or underlying communications link, though significant attention is...
4.1 Measurements of frictional properties on a film or sheeting are made by either sliding the film or sheeting over itself or over another substance. The coefficients of friction are related to the slip properties of plastic films that are of wide interest in packaging applications. These methods...
Narrow Your Results