This standard specifies the thickness measurement method of plating effective surfaceNote1) (hereinafter referred to as the "plating") of plated products for automobile parts(hereinafter referred to as the "products"). Note 1) The effective surface means a portion that is used...
IEC 61196-1-303:2018(E) defines the requirements for measuring the plating thickness for silver and tin conductors for coaxial cables used in analogue and digital communication systems. This test method uses a procedure for determining the plating thickness of silver and...
This part of IEC 61196 defines the requirements for measuring the plating thickness for silver and tin conductors for coaxial cables used in analogue and digital communication systems. This test method uses a procedure for determining the plating thickness of silver and...
PURPOSE There are a number of techniques currently being used for measuring plating thickness. All have peculiar application and also limitations, Basic economics, however, demands that for measuring gold thicknesses in the commonly used plating thickness ranges,...
This standard specifies the procedures for measuring the plating thickness and centricity of metallic coatings on single conductors. It shall be used together with EN 3475-100.
EXECUTIVE SUMMARY Four immersion silver plated boards were submitted to the lab for evaluation. The boards were supplied from three different vendors with different silver thicknesses. Vendor A 3X SAC Vendor G X SAC Vendor D 3X Lead Vendor G X Lead Five Pb-Free components were assembled on...
1.1 This practice covers the use of magnetic- and eddy current-type thickness instruments (gauges) for nondestructive thickness measurement of a coating on a metal (that is, electrically conducting) substrate. The substrate may be ferrous or nonferrous. The coating or plating...
1.1 This guide provides information about the deposition of chromium on steel for engineering uses. This is sometimes called "functional" or "hard" chromium and is usually applied directly to the basis metal and is usually thicker than decorative deposits. 1.2 The values stated in either SI units...
1.1 This specification covers requirements for electrodeposited coatings of silver used for engineering purposes that may be matt, bright, or semibright and are not less than 98?mass?% silver purity. 1.2 Coatings of silver covered by this specification are usually employed for solderable surfaces,...
5.1 The spiral contractometer, properly used, will give reproducible results (see 9.5) over a wide range of stress values. Internal stress limits with this method can be specified for use by both the purchaser and the producer of plated or electroformed parts. 5.2 Plating with large tensile...
4.1 This guide describes the basic principles of baking in terms of key parameters, notably coating hydrogen permeability, coating thickness, and the strength of the steel substrate being coated. No mandatory requirements are given. Rather, this document provides guidance to electroplaters...
4.1 This guide describes the basic principles of baking in terms of key parameters, notably coating hydrogen permeability, coating thickness, and the strength of the steel substrate being coated. No mandatory requirements are given. Rather, this document provides guidance to electroplaters...
This part of IEC 61196 defines the requirements for measuring the plating thickness for silver and tin conductors for coaxial cables used in analogue and digital communication systems. This test method uses a procedure for determining the plating thickness of silver and...
This specification covers application, performance and dimensional requirements for electrodeposited coatings on threaded fasteners with metric screw threads. It specifies coating thickness, supplementary hexavalent chromate or trivalent chromite finishes, corrosion resistance, precautions...
1.1 This practice covers the procedure for sorting materials using the thermoelectric method, which is based on the Seebeck effect. The procedure relates to the use of direct- and comparator-type thermoelectric instruments for distinguishing variations in materials which affect the thermoelectric...
This specification covers single-reduced black plate produced from low carbon, cold-reduced steel, furnished in coils and cut sizes, for use in the manufacture of containers, closures, signs, toys and other products, as well as for plating applications. The black plates shall be produced...
Narrow Your Results