5.1 This test method is intended to provide the user with acceptable apparatus requirements and a prescribed procedure to determine the bending moment capacity of spun pre-stressed concrete bases for use with tapered steel poles. 5.2 The results of this test method are used as a basis for...
5.1 These test methods establish standard procedures designed for evaluating the performance wind safety and durability characteristics of MUs. 5.2 These test methods are suitable for both end users and manufacturers to evaluate performance characteristics of MUs and base mounting components. 5.2.1...
1.1 This guide for sports facility padding describes wall and fixed object padding practices in and around indoor and outdoor overall playing areas for sports and recreation. This guide intends to inform owners, facility operators, and designers/installers
1.1 This test method is used for evaluating how gloves affect an individual wearer's ability to grip onto a hard surface object. 1.1.1 This test method establishes procedures for measuring the maximum torque that can be attained by an individual's bare hand as compared to the maximum torque that is...
1.1 This specification defines the dimensions and characteristics of a pole vault plant box. 1.2 Units-The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety...
1.1 This specification covers the manufacture, assembly, recommended maintenance and use of complete residential basketball systems. 1.2 This specification is intended to reduce the potential hazards associated with the installation and use of residential basketball systems. 1.3 This specification...
1.1 This test method measures the impact attenuation of surface systems and materials, specifically the peak impact acceleration ("impact shock") and calculates the Head Injury Criteria produced under prescribed impact conditions. 1.2 This test method is applicable to surface systems intended to...
1.1 This specification covers ductile iron transmission and distribution utility poles. 1.2 The values stated in inch-pound units are to be regarded as standard. The SI values given are mathematical conversions that are provided for information only and are not considered standard. 1.3 The...
1.1 This guide for sports facility padding describes wall and fixed object padding practices in and around indoor and outdoor overall playing areas for sports and recreation. This guide intends to inform owners, facility operators, and designers/installers
1.1 This practice covers safety and performance guidelines pertaining to public and private pole vault facilities and the immediate surrounding area. These guidelines pertain to any elements intended to be used in the performance of the sport including athlete and equipment areas, height...
4.1 Tests of wood poles are made to determine: 4.1.1 Data for use in establishing allowable stresses, 4.1.2 Data upon which to base economical pole line design, 4.1.3 Data on the strength properties of different species in pole sizes, 4.1.4 Data as to the influence of defects...
1.1 This specification covers general requirements for prestressed concrete poles statically cast for use as structural supports for lights, distribution, transmission, and dead end poles. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in...
This specification covers spun cast prestressed concrete poles for use as structural supports for streetlights, traffic signals, and transmission, distribution, and communication lines. The acceptability of the poles shall be determined by the results of full-scale bending and...
This specification covers spun cast prestressed concrete bases used in tapered steel lighting poles. It provides requirements for acceptability of spun prestressed concrete bases produced in accordance with this specification, materials, bending test procedures, tolerances, and drawings. The...
1.1 This test method is used for evaluating how gloves affect an individual wearer's ability to grip onto a hard surface object. 1.1.1 This test method establishes procedures for measuring the maximum torque that can be attained by an individual's bare hand as compared to the maximum torque that is...
1.1 This specification covers portable, live-line tool-supported two-pole phasing testers to be used on AC electrical systems. 1.2 Two types of phasing testers are provided and are designated as Type I Resistive and Type II Capacitive. 1.3 Two styles of phasing testers are provided and are...
1.1 This specification covers requirements and contains test methods for outdoor recreational camping tents for persons. These requirements include controlled small flame test methods for materials used to manufacture tents. The requirements are intended to specify materials that do not present an...
1.1 This test method covers the use of the X-ray diffractometer to prepare quantitative pole figures. 1.2 The test method consists of several experimental procedures. Some of the procedures (1-5)2 permit preparation of a complete pole figure. Others must be used in combination to...
1.1 These test methods cover three electrical tests on plastic guards and assembled guard systems. They are: 1.1.1 Method A-Withstand voltage proof test, 1.1.2 Method B-Flashover voltage, and 1.1.3 Method C-Leakage current. 1.1.4 This specification covers plastic guard equipment and guard systems...
Narrow Your Results