loading
MPIF POWDER - Powder Forging
January 1, 1990 - MPIF
A description is not available for this item.
MPIF HANDBOOK POWDER - HANDBOOK OF POWDER SCIENCE AND TECHNOLOGY
MPIF
A description is not available for this item.
MPIF POWDER HANDBOOK - POWDER TECHNOLOGY HANDBOOK
MPIF
A description is not available for this item.
MPIF POWDER MATERIAL - POWDER METALLURGY - PROCESSING AND MATERIALS
MPIF
A description is not available for this item.
MPIF POWDER SURFACE - POWDER SURFACE AREA AND POROSITY
MPIF
A description is not available for this item.
MPIF POWDER VOLUME 2 - POWDER INJECTION MOLDING
MPIF
A description is not available for this item.
MPIF POWDER METALLURGY - POWDER METALLURGY
MPIF
A description is not available for this item.
MPIF POWDER OVERVIEW - POWDER METALLURGY - AN OVERVIEW
MPIF
A description is not available for this item.
MPIF POWDER INJECTION - POWDER INJECTION MOLDING SYMPOSIUM
MPIF
A description is not available for this item.
MPIF POWDER VOLUME 5 - POWDER INJECTION MOLDING
MPIF
A description is not available for this item.
MPIF POWDER VOLUME 3 - POWDER INJECTION MOLDING
MPIF
A description is not available for this item.
MPIF POWDER GUIDE - PM Condensed
MPIF
A description is not available for this item.
ASTM B939-21(2025) - Standard Test Method for Radial Crushing Strength, K , of Powder Metallurgy (PM) Bearings and Structural Materials
September 1, 2025 - ASTM International

1.1 This test method covers the equipment and laboratory procedure for the determination of the radial crushing strength of materials using either a plain powder metallurgy (PM) bearing or a thin-walled hollow cylindrical test specimen. This is a destructive test that produces...

ASTM F3263-17(2025) - Standard Guide for Packaging Test Method Validation
October 1, 2025 - ASTM International

4.1 Addressing consensus standards with inter-laboratory studies (ILS) and methods specific to an organization. Test methods need to be validated in many cases, in order to be able to rely on the results. This has to be done at the organization performing the tests but is also performed in the...

ASTM D6361/D6361M-98(2025) - Standard Guide for Selecting Cleaning Agents and Processes
August 1, 2025 - ASTM International

1.1 This guide is intended to assist design engineers, manufacturing/industrial engineers, and production managers in selecting the best fit cleaning agent and process. This guide takes into account environmental pollution prevention factors in a selection process. 1.2 This guide is not to...

ASTM F3474-25 - Standard Practice for Establishing Exoskeleton Functional Ergonomic Parameters and Test Metrics
June 15, 2025 - ASTM International

1.1 This practice provides a recommended approach and a set of options for assessing one or more specific ergonomic parameters with respect to human users of exoskeletons or exosuits, or both. 1.2 This practice provides functional ergonomic criteria to consider for the design, production,...

ASTM C996-20(2025) - Standard Specification for Uranium Hexafluoride Enriched to Less Than 5?%? 235U
June 1, 2025 - ASTM International

1.1 This specification covers nuclear grade uranium hexafluoride (UF6) that either has been processed through an enrichment plant or has been produced by the blending of Highly Enriched Uranium with other uranium to obtain uranium of any? 235U concentration below 5?% and that is intended for fuel...

ASTM F3087-15(2024) - Standard Specification for Acrylic Molding Resins for Medical Implant Applications
September 15, 2024 - ASTM International

This specification covers requirements and corresponding test methods for acrylic resins supplied in virgin form (typically pellets, powder, or granules) for medical implant applications. The co-polymers are limited to random co-polymers, which shall contain poly(methyl methacrylate)...

ASTM D5236-25 - Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)
April 1, 2025 - ASTM International

1.1 This test method covers the procedure for distillation of heavy hydrocarbon mixtures having initial boiling points greater than 150?°C (300?°F), such as heavy crude oils, petroleum distillates, residues, and synthetic mixtures. It employs a potstill with a low pressure drop entrainment...

Advertisement