loading
MPIF POWDER - Powder Forging
January 1, 1990 - MPIF
A description is not available for this item.
MPIF HANDBOOK POWDER - HANDBOOK OF POWDER SCIENCE AND TECHNOLOGY
MPIF
A description is not available for this item.
MPIF POWDER HANDBOOK - POWDER TECHNOLOGY HANDBOOK
MPIF
A description is not available for this item.
MPIF POWDER MATERIAL - POWDER METALLURGY - PROCESSING AND MATERIALS
MPIF
A description is not available for this item.
MPIF POWDER SURFACE - POWDER SURFACE AREA AND POROSITY
MPIF
A description is not available for this item.
MPIF POWDER VOLUME 2 - POWDER INJECTION MOLDING
MPIF
A description is not available for this item.
IEEE TESTING OBJECT - TESTING OBJECT-ORIENTED SOFTWARE
IEEE
A description is not available for this item.
MPIF POWDER METALLURGY - POWDER METALLURGY
MPIF
A description is not available for this item.
MPIF POWDER OVERVIEW - POWDER METALLURGY - AN OVERVIEW
MPIF
A description is not available for this item.
MPIF POWDER INJECTION - POWDER INJECTION MOLDING SYMPOSIUM
MPIF
A description is not available for this item.
MPIF POWDER VOLUME 5 - POWDER INJECTION MOLDING
MPIF
A description is not available for this item.
MPIF POWDER VOLUME 3 - POWDER INJECTION MOLDING
MPIF
A description is not available for this item.
MPIF POWDER GUIDE - PM Condensed
MPIF
A description is not available for this item.
ASTM D445-26 - Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
July 1, 2026 - ASTM International

5.1 Many petroleum products, and some non-petroleum materials, are used as lubricants, and the correct operation of the equipment depends upon the appropriate viscosity of the liquid being used. In addition, the viscosity of many petroleum fuels is important for the estimation of optimum...

ASTM 51818-26 - Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 80 and 300 keV
June 1, 2026 - ASTM International

1.1 This practice covers dosimetric procedures to be followed in installation qualification, operational qualification, performance qualification (IQ, OQ, PQ), and routine processing at electron beam facilities to ensure that the product has been treated with an acceptable range of absorbed doses....

ASTM D7895/D7895M-19(2025) - Standard Test Method for Thermal Endurance of Coating Powders Used for Powder Coating Insulation Systems
December 1, 2025 - ASTM International

1.1 This test method provides a procedure for evaluating thermal endurance of coating powders by determining the length of aging time at selected elevated temperatures required to achieve dielectric breakdown at room temperature at a pre-determined proof voltage. Thermal endurance is...

ASTM E2458-26 - Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents and Toxins from Nonporous Surfaces
January 15, 2026 - ASTM International

1.1 These practices cover the collection of visible powders that are suspected biological agents and toxins from solid nonporous surfaces using a bulk collection method, using a dry swab and laminated card, followed by a swab sampling method using a sterile moistened swab. Bulk powder...

ASTM C1484-10(2026) - Standard Specification for Vacuum Insulation Panels
March 1, 2026 - ASTM International

This specification covers the general requirements for vacuum insulation panels (VIP). These panels have been used wherever high thermal resistance is desired in confined space applications, such as transportation, equipment, and appliances. The panel barrier consists of one or more layers...

ASTM D8648-25 - Standard Test Method for Determining Flowability Using GranuDrum
December 1, 2025 - ASTM International

1.1 This method covers the apparatus and procedures for measuring the dynamic angle of repose and related properties of powders and bulk solids. 1.2 The maximum particle size of the specimen must be no greater than 2 mm. Note 1: Typically, this device is used for testing...

Advertisement