loading
JIS QUALITY CONTROL HDBK - JIS Quality Control Handbook
January 1, 2019 - JSA
A description is not available for this item.
ASTM D8102-17(2024) - Standard Practice for Manufacturing Quality Control of Geotextiles
November 1, 2024 - ASTM International

1.1 This practice covers the manufacturing quality control of geotextiles, describing types of tests, the proper test methods, minimum testing frequencies, and best practices for sampling. 1.2 This practice does not address manufacturing quality assurance, product acceptance...

ASTM E3500-25 - Standard Practice for Quality Control of Routine Testing in a Laboratory
June 1, 2025 - ASTM International

1.1 This practice describes quality control programs to monitor and maintain test method performance in a single laboratory conducting a test method on a routine basis. It is applicable when a control sample material is routinely run with samples for the purpose of monitoring...

ASTM D5283-18(2025) - Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation
November 1, 2025 - ASTM International

5.1 Environmental data are often required for making regulatory and programmatic decisions. These data must be of known quality commensurate with their intended use. 5.2 Data generation efforts involve the following: establishment of the DQOs; design of the project plan to meet the DQOs;...

ASTM D6809-24 - Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
July 1, 2024 - ASTM International

5.1 Quality Control and Quality Assurance practices are important for the optimum operation of testing laboratories using D16 methods for aromatic hydrocarbons and related materials. Quality procedure guidelines, like those described in this document or other suitably...

ASTM MANUAL ON QUALITY - ASTM MANUAL ON QUALITY OF CONTROL MATERIALS
ASTM
A description is not available for this item.
ASTM F2774-24 - Standard Practice for Manufacturing Quality Control of Consumer Trampoline Bed Material
July 15, 2024 - ASTM International

4.1 CTM must be properly manufactured in a manner consistent with a minimum level of quality control as determined by in-house testing of the final product by the CTM manufacturer. This practice suggests types of tests, the methods of the testing and the minimum testing frequencies. 4...

ASTM F940-99(2025)e1 - Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
June 1, 2025 - ASTM International

1.1 This practice provides the quality control receipt inspection procedures for protective coatings (paints) procured for end item use on ships and other marine structures. The practice includes methods and procedures for verifying that coating materials received are within the range...

ASTM D7282-24 - Standard Practice for Setup, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements
April 1, 2024 - ASTM International

5.1 This practice is consistent with a performance-based approach wherein the frequency of recalibration and instrument testing is linked to the results from continuing instrument quality control. Under the premise of this practice, a laboratory demonstrates that its instrument...

ASTM ISO/ASTM52953-25 - Additive manufacturing for metals — General principles — Registration of data acquired from process monitoring and for quality control
January 1, 2025 - ASTM International

1.1 This document sets and defines the minimum requirements for registration of data acquired from process monitoring and for quality control in additive manufacturing (AM), including the description of a procedure. 1.2 Furthermore, this document comprises actions that users shall...

UFGS-01 45 00.00 10 - QUALITY CONTROL
November 1, 2016 - NAVY

NOTE: This guide specification covers requirements for Contractor Quality Control for construction projects or design-build construction projects. This section can be used for both design-build and

ASTM D5889/D5889M-18(2022) - Standard Practice for Quality Control of Geosynthetic Clay Liners
October 1, 2022 - ASTM International

1.1 This practice covers the manufacturing quality control of geosynthetic clay liners (GCLs), describing types of tests, the proper test methods, and the minimum testing frequencies. 1.2 This practice is intended to aid manufacturers, suppliers, purchasers, and users of GCLs in...

ASTM D6299-26a - Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
July 1, 2026 - ASTM International

1.1 This practice covers information for the design and operation of a program to monitor and control ongoing stability and precision and bias performance of selected analytical measurement systems using a collection of generally accepted statistical quality control (SQC)...

ASTM E1817-26 - Standard Practice for Controlling Quality of Radiographic Examination by Using Representative Quality Indicators (RQIs)
February 1, 2026 - ASTM International

1.1 This practice covers the radiographic examination of unique materials or processes, or both, for which conventionally designed image quality indicators (IQIs), such as those described in Practices E747, E2002, and E1025, and Test Method E1695 may be inadequate in controlling the...

ASTM D6299-26 - Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
May 1, 2026 - ASTM International

1.1 This practice covers information for the design and operation of a program to monitor and control ongoing stability and precision and bias performance of selected analytical measurement systems using a collection of generally accepted statistical quality control (SQC)...

DS/EN 16907-5 - Earthworks – Part 5: Quality control
December 10, 2018 - DS

This European Standard provides recommendations and guidance on the quality assurance and quality control of earthworks construction forming part of general civil engineering and building works. It provides guidance on the techniques to be used to give clients, contractors and...

ISO 22873 - Quality control for batching and mixing steel fibre-reinforced concretes
April 1, 2021 - ISO

This document specifies the principles and procedures to secure quality control of steel fibre-reinforced concretes (SFRC) during batching and mixing procedures to deliver to a purchaser with the ingredients uniformly mixed, and that can be sampled and tested at the point of delivery.

ISO 13485 P-425 CONTROL - 13485 P-425 (424) CONTROL OF QUALITY RECORDS
9000STORE
A description is not available for this item.
UFGS-01 45 00.00 20 - QUALITY CONTROL
November 1, 2011 - NAVY

NOTE: This guide specification covers the preparation and use of Design-Bid-Build (DBB) Quality Control. This guide specification will normally be used for Category One and Category Two projects. It may be also used for smaller, complex projects at the discretion of the Government....

Advertisement