Radiation Detection: Concepts, Methods, and Devices provides a modern overview of radiation detection devices and radiation measurement methods. The book topics have been selected on the basis of the authors' many years of experience designing radiation...
There is a growing need to understand and combat potential radiation damage problems in semiconductor devices and circuits. Assessing the billion-dollar market for detection equipment in the context of medical imaging using ionizing radiation, Electronics for Radiation...
This book is intended for senior undergraduate and beginning graduate students in physics, nuclear engineering, health physics and nuclear medicine, and for specialized training courses for radiation protection personnel and environmental safety engineers.To keep the size of the book...
This document specifies the format of binary list-mode data at the output of digital data acquisition devices used for the detection and measurement of radiation. Such data acquisition devices may employ digital signal processors (DSP) and field-programmable gate arrays (FPGA) in...
4.1 UV-A lamps are used in fluorescent penetrant and magnetic particle examination processes to excite fluorophores (dyes or pigments) to maximize the contrast and detection of discontinuities. The fluorescent dyes/pigments absorb energy from the UV-A radiation and re-emit visible...
4.1 UV-A lamps are used in fluorescent penetrant and magnetic particle examination processes to excite fluorophores (dyes or pigments) to maximize the contrast and detection of discontinuities. The fluorescent dyes/pigments absorb energy from the UV-A radiation and re-emit visible...
This standard specifies the basic performance requirements for backpack-based radiation-detection systems (BRDs) used in homeland security applications. BRDs shall detect gamma radiation and may include neutron detection and/or the identification of gamma-ray emitting...
1.1 This practice covers the procedure for use of microwave radiation for sample decomposition prior to elemental determination by atomic spectroscopy. 1.1.1 Although this practice is based on the use of inductively coupled plasma atomic emission spectrometry (ICP-AES) and atomic absorption...
4.1 CT may be performed on an object when it is in the as-cast, intermediate, final machined condition, or as a flaw or failure detection tool. A CT examination can be used as a design tool to improve wax forms and moldings, establish process parameters, randomly check process control,...
4.1 UV-A lamps are used in fluorescent penetrant and magnetic particle examination processes to excite fluorophores (dyes or pigments) to maximize the contrast and detection of discontinuities. The fluorescent dyes/pigments absorb energy from the UV-A radiation and re-emit visible...
4.1 UV-A lamps are used in fluorescent penetrant and magnetic particle examination processes to excite fluorophores (dyes or pigments) to maximize the contrast and detection of discontinuities. The fluorescent dyes/pigments absorb energy from the UV-A radiation and re-emit visible...
4.1 The SSTR method provides for the measurement of absolute fission density per unit mass. Absolute neutron fluence can then be inferred from these SSTR-based absolute fission rate observations if an appropriate neutron spectrum average fission cross section is known. This method is highly...
This part sets out requirements that apply to all Ministry of Defence (MOD) contracts, for the Examination and Testing of Ionising RDME items. It applies for RDME sent to a contractor for repair, calibration after repair, calibration and when the contractor is required to travel to the Test and...
1.1 This test method covers the determination of total nitrogen (TN) and total dissolved nitrogen (TDN) in surface water, seawater, groundwater, wastewater, and wastewater effluents in the range from 0.2?mg/L N to 10?mg/L N. Concentrations from 10?mg/L to 500?mg/L are possible when used in...
This standard establishes the performance requirements and provides the testing and evaluation criteria for installed radiation portal monitors (RPMs) that detect photon- and neutron-emitting radioactive substances by monitoring people, packages, containers, and vehicles. Performance...
Narrow Your Results